Endurance Technologies Interview Questions, Process, and Tips

It was fundamental and basic

Q1. This was a one o one interview with the Hr and selected people will move to the other 2 technical rounds
Add your answer
Q2. Can you introduce yourself and provide an overview of the projects you have worked on?
Ans. 
I am a recent graduate with experience in project management and engineering design.
• Managed a team of 5 to design and implement a solar-powered irrigation system for a local community

• Developed a prototype for a new sustainable packaging material using biodegradable materials

• Collaborated with a cross-functional team to optimize production processes and reduce waste in a manufacturing plant
Answered by AI
Add your answer

Q1. Questions were asked regarding suspension geometries and calculations?
Add your answer
Q2. Explain about the different suspension geometries and explain how forces act on them
Ans. 
Suspension geometries include double wishbone, MacPherson strut, and multi-link, each experiencing different forces like compression, rebound, and lateral forces.
• Double wishbone suspension has two control arms that allow for independent control of camber and toe angles.

• MacPherson strut suspension uses a single control arm and a strut to support the wheel and handle vertical forces.

• Multi-link suspension uses multiple co...read more
Answered by AI
Add your answer

Q1. What does the stress-strain graph of stainless steel look like?
Ans. 
Stress-strain graph of stainless steel typically shows a linear elastic region followed by a yield point and then strain hardening.
• Stainless steel initially deforms elastically until reaching the yield point

• After the yield point, plastic deformation occurs with strain hardening

• The graph may show a slight decrease in stress before reaching ultimate tensile strength

• Fracture occurs after the ultimate tensile strength is r
Answered by AI
Add your answer

Q1. What you Know about this Company?
Ans. 
Intern is a leading company in the tech industry, known for its innovative products and strong company culture.
• Intern is a tech company specializing in software development and digital solutions.

• The company is known for its cutting-edge technology and innovative approach to problem-solving.

• Intern has a strong company culture that values collaboration, creativity, and continuous learning.

• Some of Intern's notable product...read more
Answered by AI
Add your answer
Q2. Why you want to work here?
Ans. 
I am passionate about the company's mission and values, and I believe my skills and experience align well with the opportunities here.
• Passionate about company's mission and values

• Skills and experience align well with opportunities

• Excited about potential for growth and learning
Answered by AI
Add your answer

Q1. Do you have any questions?
Add your answer
Q2. What are your salary expectations?
Ans. 
I am open to discussing salary based on the responsibilities and opportunities provided.
• Express willingness to negotiate based on job responsibilities

• Research industry standards and company budget to provide a reasonable range

• Consider benefits and growth opportunities in addition to salary
Answered by AI
Add your answer

Q1. Measuring instrument.
Add your answer
Q2. Metal science
Add your answer
Q3. Quality definition
Add your answer
Q4. Engineering drawing
Add your answer

Q1. Which tool using for Route Cause analysis
Ans. 
The tool commonly used for Root Cause Analysis is the Fishbone Diagram (Ishikawa Diagram).
• Fishbone Diagram (Ishikawa Diagram) is a visual tool used to identify the possible causes of a problem.

• 5 Whys technique is also commonly used for Root Cause Analysis.

• Pareto Analysis can be used to prioritize the causes identified in the Fishbone Diagram.

• Root Cause Analysis software like TapRooT or Apollo Root Cause Analysis can al...read more
Answered by AI
Add your answer
Q2. What is the CTQ
Ans. 
CTQ stands for Critical to Quality. It is a key measurable characteristic of a product or process that is essential for customer satisfaction.
• CTQs are identified based on customer requirements and expectations.

• They are used to define the quality standards that must be met for a product or process to be considered successful.

• Examples of CTQs include product dimensions, performance metrics, and defect rates.
Answered by AI
Add your answer
Q3. Which is the CTQ parameters and Controls.
Ans. 
CTQ parameters are critical to quality parameters that directly impact customer satisfaction. Controls are measures put in place to ensure these parameters are met.
• CTQ parameters are key characteristics of a product or service that directly impact customer satisfaction

• Controls are measures put in place to ensure CTQ parameters are met consistently

• Examples of CTQ parameters include product dimensions, performance metric...read more
Answered by AI
Add your answer
Q4. Which Tooling used and supplier name
Ans. 
We use JIRA for bug tracking and TestRail for test case management. Our main supplier for testing tools is SmartBear.
• JIRA for bug tracking

• TestRail for test case management

• Main supplier: SmartBear
Answered by AI
Add your answer
Q5. Why Anodizing process required.
Ans. 
Anodizing process is required to increase corrosion resistance, improve durability, enhance aesthetic appeal, and provide better adhesion for paint or other coatings.
• Increases corrosion resistance by forming a protective oxide layer on the surface of the metal

• Improves durability by hardening the surface of the metal

• Enhances aesthetic appeal by offering a variety of color options through dyeing

• Provides better adhesion f...read more
Answered by AI
Add your answer
Q6. Which is customer complaint and how you ensure anticipation of defect.
Ans. 
Customer complaint is feedback from customers regarding issues with products or services. Anticipation of defects involves proactive measures to identify and address potential issues before they occur.
• Customer complaint is any feedback or concern raised by a customer regarding a product or service.

• Anticipation of defects involves implementing quality control measures to identify and address potential issues before they...read more
Answered by AI
Add your answer
Q7. Whic is Soft skills you have
Ans. 
Some of the soft skills I possess include strong communication, problem-solving abilities, leadership skills, and attention to detail.
• Strong communication skills - able to effectively convey information and ideas

• Problem-solving abilities - adept at identifying issues and finding solutions

• Leadership skills - capable of guiding and motivating team members

• Attention to detail - meticulous in ensuring accuracy and quality
Answered by AI
Add your answer

What action required for control porosity defect through Machining process

Q1. Personal details
Add your answer
Q2. Expectations and requirements
Add your answer