Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Endurance Technologies Team. If you also belong to the team, you can get access from here

Endurance Technologies Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Endurance Technologies Executive Engineer Interview Questions and Answers

Updated 15 Nov 2024

Endurance Technologies Executive Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. How to handle Customer complaint ? How to treat supplier when NC occurred in sample?
  • Ans. 

    Handling customer complaints and NC occurrences with suppliers

    • Listen to the customer's complaint and empathize with their situation

    • Apologize for the inconvenience caused and assure them that the issue will be resolved

    • Investigate the root cause of the complaint and take corrective actions to prevent it from happening again

    • Keep the customer informed about the progress of the resolution

    • For NC occurrences with suppliers, c...

  • Answered by AI
  • Q2. What kind of pokayoke should be implement on repetitive problems
  • Ans. 

    Implement mistake-proofing techniques to prevent repetitive problems.

    • Identify the root cause of the problem

    • Design a poka-yoke that prevents the mistake from happening

    • Test the poka-yoke to ensure it is effective

    • Train employees on the new process

    • Continuously monitor and improve the poka-yoke

    • Examples: color-coding, checklists, sensors, warning lights

  • Answered by AI
  • Q3. How to tackle reputable problems?
  • Ans. 

    Reputable problems can be tackled by identifying the root cause and implementing effective solutions.

    • Conduct a thorough analysis to identify the root cause of the problem

    • Develop a plan of action to address the issue

    • Implement the plan and monitor progress

    • Communicate with stakeholders to keep them informed

    • Evaluate the effectiveness of the solution and make adjustments as necessary

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go Detail in SPC and MSA
how you will contribute your knowledge to minimize PPM etc.

Executive Engineer Interview Questions & Answers

user image AKHTAR ANSARI

posted on 15 Nov 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Why join ETL? Your resent company why left?
  • Q2. About process like powder coating and plating whatever your responsibly?
Round 2 - Technical 

(2 Questions)

  • Q1. Introducing your self?
  • Q2. Roll and responsibility as well as wet process details discussed.

Interview Preparation Tips

Interview preparation tips for other job seekers - Don’t join ETL bcz of management is very bad no one is responsible like HR don’t work related to HR activities also plant head don’t work like plant head related work.
Only management work if you have yo mail direct MD sir Autherwise not a single person work here.
All are generate one story and don’t do this.

Executive Engineer Interview Questions Asked at Other Companies

asked in TCS
Q1. Question 1: What is memory leak? Question 2: What is static varia ... read more
Q2. What are the main Contamination in Safe drinkig Water.
Q3. What is material balance ? And wrote down the column material bal ... read more
Q4. What are the Various ways of distribution Transformer protection?
asked in TCS
Q5. Differences between C and Java? Explain me about exception handli ... read more

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Telephonic Call 

(1 Question)

  • Q1. Technical questions related to Mechanical Engineering. Current job role and responsibilities
Round 3 - Panel interview 

(2 Questions)

  • Q1. Current job role and responsibilities.
  • Q2. What is Tempering? Material science questions
Round 4 - One-on-one 

(2 Questions)

  • Q1. Interview with VP India.
  • Q2. Questions on Combustion Engines. Difference between two-stroke and four-stroke. Current job role and responsibilities. How to design a snap.

Interview Preparation Tips

Interview preparation tips for other job seekers - Know your profile well. Brush up on Mechanical engineering topics
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. How are you ?
  • Q2. Where do you live
  • Q3. How mch experiance you have
  • Ans. 

    I have 8 years of experience in the field of engineering.

    • I have worked in various engineering roles for 8 years

    • I have experience in project management, design, and implementation

    • I have successfully completed multiple engineering projects

    • I have received positive feedback and recognition for my work

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep searchi new jobs
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is cycle time?
  • Ans. 

    Cycle time is the total time taken to complete a process or task from start to finish.

    • Cycle time is a key metric in process improvement and efficiency analysis.

    • It helps in identifying bottlenecks and areas for improvement in a process.

    • For example, in manufacturing, cycle time can refer to the time taken to produce one unit of a product.

    • Reducing cycle time can lead to increased productivity and cost savings.

  • Answered by AI
  • Q2. What is line balancing
  • Ans. 

    Line balancing is the process of assigning tasks to workstations in a way that evens out the workload and maximizes efficiency.

    • Involves distributing work evenly among workstations

    • Helps in reducing idle time and bottlenecks

    • Improves productivity and efficiency

    • Example: In a manufacturing plant, line balancing ensures each workstation has a similar amount of work to do

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Scm role and responsibilities
  • Q2. Earlier experience and roles
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

What kind of behavior for workers

Round 2 - Technical 

(1 Question)

  • Q1. Add your process actives
  • Ans. 

    Process actives are steps or tasks involved in completing a specific process.

    • Identify all the steps involved in the process

    • List the tasks in sequential order

    • Define the inputs and outputs of each step

    • Assign responsibilities for each task

    • Monitor progress and adjust as needed

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep good knowledge about your section

Interview Questionnaire 

4 Questions

  • Q1. When you apply for the Post of Sr Engineer, they expect a professional answer from your field. Since I was from a tooling background, they asked me few questions which were not very tricky so I answered th...
  • Q2. Generally, they would like to know whether you are ready to relocate. Compay prefers persons who are easy to relocate and travel. So be open-minded and accept the challenge.
  • Q3. They would like to know if you are adjustable in another state too.
  • Q4. They would like to know the salary expectation.

Interview Preparation Tips

Interview preparation tips for other job seekers - My advice to a new aspiring professional is to be open-minded and accept the challenge offered to you. Based on your performance the company will surely look after your choices and preference. you have to bid your salary a little high if they are likely to post you to some outstation.

I applied via Approached by Company and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic HR question (tell me about yourself and similar)
Round 3 - Technical 

(1 Question)

  • Q1. Technical questions related to field
Round 4 - One-on-one 

(1 Question)

  • Q1. Interview cum interaction with top management

Interview Preparation Tips

Interview preparation tips for other job seekers - Stick to basics and should have good knowledge of respective field.

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Which types of lacquer used on lens and Housing ?
  • Ans. 

    The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

    • Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

    • Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

    • Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

  • Answered by AI
  • Q2. What is size fine filter ?
  • Ans. 

    A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

    • Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

    • They are designed to capture particles that are smaller than what can be filtered by regular filters.

    • These filters can be made of various materials such as paper, fabric, or synthetic fibers.

    • Examples of size ...

  • Answered by AI
  • Q3. On which material direct metalizing is applicable ?
  • Ans. 

    Direct metalizing is applicable on materials that can conduct electricity.

    • Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

    • The material should be able to conduct electricity for direct metalizing to be applicable.

    • Materials like plastic, glass, and ceramics can be direct metalized.

    • Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

  • Answered by AI
  • Q4. PC Material
  • Q5. How much UV energy is required for curing?
  • Ans. 

    The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

    • UV energy required for curing varies depending on the material being cured

    • Intensity of the UV light also affects the amount of energy required

    • UV energy is typically measured in Joules per square centimeter (J/cm²)

    • Examples of materials that require UV curing include adhesives, coatings, and inks

  • Answered by AI
  • Q6. 2500 ~ 3500
  • Q7. How much DFT is required as per standard ?
  • Ans. 

    The amount of DFT required as per standard varies depending on the specific industry and project requirements.

    • The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

    • Different industries may have different standards for DFT.

    • The complexity and size of the project also influence the amount of DFT required.

    • DFT techniques include scan chains, built-in self-test (BI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It must be done as like process catroled

Endurance Technologies Interview FAQs

How many rounds are there in Endurance Technologies Executive Engineer interview?
Endurance Technologies interview process usually has 2 rounds. The most common rounds in the Endurance Technologies interview process are Technical, Resume Shortlist and HR.
What are the top questions asked in Endurance Technologies Executive Engineer interview?

Some of the top questions asked at the Endurance Technologies Executive Engineer interview -

  1. What kind of pokayoke should be implement on repetitive probl...read more
  2. How to handle Customer complaint ? How to treat supplier when NC occurred in sa...read more
  3. How to tackle reputable proble...read more

Tell us how to improve this page.

Endurance Technologies Executive Engineer Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 284 Interviews
Subros Interview Questions
3.8
 • 171 Interviews
Spark Minda Interview Questions
3.9
 • 128 Interviews
Gabriel India Interview Questions
4.2
 • 101 Interviews
NBC Bearings Interview Questions
3.9
 • 84 Interviews
DENSO Interview Questions
4.1
 • 78 Interviews
CIE Automotive Interview Questions
3.6
 • 77 Interviews
View all
Endurance Technologies Executive Engineer Salary
based on 89 salaries
₹3.8 L/yr - ₹9.5 L/yr
13% more than the average Executive Engineer Salary in India
View more details

Endurance Technologies Executive Engineer Reviews and Ratings

based on 22 reviews

3.8/5

Rating in categories

4.0

Skill development

3.2

Work-life balance

3.7

Salary

3.5

Job security

3.2

Company culture

3.3

Promotions

3.2

Work satisfaction

Explore 22 Reviews and Ratings
Senior Engineer
507 salaries
unlock blur

₹2 L/yr - ₹8 L/yr

Assistant Manager
293 salaries
unlock blur

₹5.5 L/yr - ₹15 L/yr

Executive
266 salaries
unlock blur

₹4 L/yr - ₹10 L/yr

Quality Engineer
221 salaries
unlock blur

₹1.1 L/yr - ₹4.8 L/yr

Senior Production Engineer
149 salaries
unlock blur

₹2.6 L/yr - ₹7 L/yr

Explore more salaries
Compare Endurance Technologies with

JBM Group

4.0
Compare

Subros

3.8
Compare

TVS Sundram Fasteners

3.7
Compare

Spark Minda

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview