Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Endurance Technologies Team. If you also belong to the team, you can get access from here

Endurance Technologies Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Endurance Technologies Quality Engineer Interview Questions and Answers

Updated 15 Dec 2024

Endurance Technologies Quality Engineer Interview Experiences

5 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Measuring instrument.
  • Q2. Metal science
  • Q3. Quality definition
  • Q4. Engineering drawing

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality system and definition.
Measuring instrument. Read and keep going to interview
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Introducing yourself
  • Q2. Related all for which position interview done and experience from previous company

Interview Preparation Tips

Interview preparation tips for other job seekers - Proper knowledge of the points you mention in your resume also you prepare first your yourself introduction

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
Q4. What is the Physical & Chemical test of Steel Reinforcement?
asked in MM AUTO
Q5. what is IATF audit , cause of IATF , relationship between for IAT ... read more

I applied via Referral and was interviewed in Nov 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About six Sigma, TPM, TQM, measuring instruments handling, etc

Interview Preparation Tips

Interview preparation tips for other job seekers - It's on technical basis and also non technical basis

I applied via Referral and was interviewed before Dec 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Quality relative present
  • Ans. 

    Quality is a crucial aspect of any product or service in the present times.

    • Quality is a key factor in customer satisfaction and loyalty.

    • Quality control measures ensure that products meet the required standards.

    • Quality assurance processes help in identifying and addressing potential issues before they become major problems.

    • Quality management systems like Six Sigma and Lean help in improving overall quality and efficienc...

  • Answered by AI
  • Q2. Quality related
  • Q3. Quality mein kaun kaun se tool use karte hain
  • Q4. Quality ke gas
  • Q5.  year ke bare mein

Interview Preparation Tips

Interview preparation tips for other job seekers - Government Polytechnic Bijnor Rudrapur quality endurance limited company

Endurance Technologies interview questions for designations

 Supplier Quality Engineer

 (1)

 Process Quality Engineer

 (1)

 Supplier Quality Assurance Engineer

 (1)

 Quality Inspector

 (1)

 Production Engineer

 (3)

 Executive Engineer

 (2)

 Maintenance Engineer

 (1)

 Manufacturing Engineer

 (1)

I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Seven QC tools
  • Ans. 

    Seven QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • Check sheets

    • Control charts

    • Histograms

    • Pareto charts

    • Scatter diagrams

    • Stratification

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Pareto Analysis

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare for discussions well in advance. If you do not know the answer please say NO.

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. GD&T symbols & explanation
  • Ans. 

    GD&T symbols are used to specify geometric tolerances on engineering drawings.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the allowable variation in form and size of features on a part

    • Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position

    • GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget

  • Answered by AI
  • Q2. How to check true position on CMM
  • Ans. 

    True position on CMM can be checked using a combination of software and hardware tools.

    • Use a calibrated probe to measure the feature location

    • Compare the measured location with the nominal location

    • Calculate the deviation and compare it with the tolerance

    • Use software tools like GD&T to analyze the results

    • Ensure the CMM is calibrated and the probe is in good condition

  • Answered by AI
  • Q3. What is FMEA
  • Ans. 

    FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.

    • FMEA is used to identify potential failures in a process or product and their effects on the system.

    • It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.

    • FMEA is commonly used in industries such a...

  • Answered by AI
  • Q4. How to do instrument selection
  • Ans. 

    Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.

    • Identify the purpose of the instrument

    • Consider the accuracy and precision required

    • Evaluate the cost and availability

    • Ensure the instrument is compatible with other equipment

    • Consider the maintenance and calibration requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always have good knowledge for the things that you have added in your resume. Do not put anything that you don't know about.

Skills evaluated in this interview

I applied via Naukri.com and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Quality in process like this PPAP, QC
  • Ans. PPAP :- ( Part production Approvel process) this is Quality in-process any one components,pist report, CMM report,Sop , process sheet, poka yoke sheet, spot integrity report, process parameters report, Quality control, etc. Submit to costumer end
  • Answered Anonymously
  • Q2. Different between rework and repear ?
  • Ans. Rework is a extra material remove on components like this spot burr , Rusty, threading taping,etc.. Repear is a diffective components in extra material add that is ready for ok components
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank you ? for give me this opportunity

Regards
Shivendra patel

Quality Engineer Interview Questions & Answers

Spark Minda user image Aman Suresh Shingade

posted on 10 Jan 2022

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is TBO In coupler
  • Ans. 

    TBO stands for Time Between Overhaul in coupler, which is the time interval between two overhauls of a coupler.

    • TBO is a maintenance term used in the aviation industry.

    • It refers to the time interval between two overhauls of a coupler.

    • During an overhaul, the coupler is disassembled, inspected, repaired, and reassembled.

    • The TBO for a coupler depends on the manufacturer's recommendations and the coupler's usage.

    • Exceeding t...

  • Answered by AI
  • Q2. It is terminal backout

Interview Preparation Tips

Interview preparation tips for other job seekers - calm down during interview

Interview Questionnaire 

5 Questions

  • Q1. Definition of quality
  • Ans. 

    Quality is meeting or exceeding customer expectations and requirements.

    • Quality is a measure of how well a product or service meets customer needs and expectations.

    • It involves meeting or exceeding customer requirements and specifications.

    • Quality can be measured through various metrics such as defect rates, customer satisfaction, and reliability.

    • Quality is a continuous process that involves identifying and addressing are...

  • Answered by AI
  • Q2. Define poka yoke
  • Ans. 

    Poka yoke is a quality control technique used to prevent errors or defects in a process.

    • Poka yoke aims to eliminate mistakes by designing processes or systems that make errors impossible or immediately detectable.

    • It involves implementing foolproof mechanisms, such as sensors, alarms, or physical barriers, to prevent or correct errors.

    • For example, a poka yoke in a manufacturing line could be a sensor that detects if a c...

  • Answered by AI
  • Q3. Type of quality tool
  • Ans. 

    Statistical Process Control (SPC) is a quality tool used to monitor and control processes to ensure they are within acceptable limits.

    • SPC involves collecting and analyzing data to identify and eliminate sources of variation in a process.

    • Control charts are commonly used in SPC to visually display process data and identify any trends or patterns.

    • Examples of SPC tools include histograms, Pareto charts, scatter diagrams, a

  • Answered by AI
  • Q4. Define Cp Cpk
  • Ans. 

    Cp and Cpk are statistical tools used to measure process capability and determine if a process is capable of producing products within specification limits.

    • Cp measures the potential capability of a process to meet specifications

    • Cpk measures the actual capability of a process to meet specifications

    • Both Cp and Cpk are calculated using the process mean and standard deviation, as well as the upper and lower specification l...

  • Answered by AI
  • Q5. What is spc
  • Ans. 

    SPC stands for Statistical Process Control. It is a method used to monitor and control processes to ensure they are operating within acceptable limits.

    • SPC involves collecting and analyzing data to identify and reduce process variation.

    • It helps in detecting and preventing defects or errors in a process.

    • Control charts are commonly used in SPC to visually display process data and identify any trends or patterns.

    • SPC can be...

  • Answered by AI

Skills evaluated in this interview

I applied via Walk-in and was interviewed in Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 7QC tools ,process audit ,product audit ,ppm,kaizen ,pokayoke ,8D
  • Q2. Quality related

Interview Preparation Tips

Interview preparation tips for other job seekers - Medium

Endurance Technologies Interview FAQs

How many rounds are there in Endurance Technologies Quality Engineer interview?
Endurance Technologies interview process usually has 1-2 rounds. The most common rounds in the Endurance Technologies interview process are Resume Shortlist, HR and Technical.
How to prepare for Endurance Technologies Quality Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Endurance Technologies. The most common topics and skills that interviewers at Endurance Technologies expect are Business Generation, Computer Networking, SQL Queries, Suits and Utilization.
What are the top questions asked in Endurance Technologies Quality Engineer interview?

Some of the top questions asked at the Endurance Technologies Quality Engineer interview -

  1. Quality relative pres...read more
  2. Seven QC to...read more
  3. About six Sigma, TPM, TQM, measuring instruments handling, ...read more

Tell us how to improve this page.

Endurance Technologies Quality Engineer Interview Process

based on 3 interviews

1 Interview rounds

  • Technical Round
View more
Endurance Technologies Quality Engineer Salary
based on 221 salaries
₹1.1 L/yr - ₹4.8 L/yr
19% less than the average Quality Engineer Salary in India
View more details

Endurance Technologies Quality Engineer Reviews and Ratings

based on 60 reviews

4.3/5

Rating in categories

4.1

Skill development

4.0

Work-life balance

3.6

Salary

3.7

Job security

4.0

Company culture

3.3

Promotions

3.8

Work satisfaction

Explore 60 Reviews and Ratings
Senior Engineer
507 salaries
unlock blur

₹2 L/yr - ₹8 L/yr

Assistant Manager
293 salaries
unlock blur

₹5.5 L/yr - ₹15 L/yr

Executive
266 salaries
unlock blur

₹4 L/yr - ₹10 L/yr

Quality Engineer
221 salaries
unlock blur

₹1.1 L/yr - ₹4.8 L/yr

Senior Production Engineer
149 salaries
unlock blur

₹2.6 L/yr - ₹7 L/yr

Explore more salaries
Compare Endurance Technologies with

JBM Group

4.0
Compare

Subros

3.8
Compare

TVS Sundram Fasteners

3.7
Compare

Spark Minda

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview