Upload Button Icon Add office photos

DENSO

Compare button icon Compare button icon Compare

Filter interviews by

DENSO Quality Engineer Interview Questions, Process, and Tips

Updated 24 Jun 2024

Top DENSO Quality Engineer Interview Questions and Answers

View all 8 questions

DENSO Quality Engineer Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(4 Questions)

  • Q1. Tell me about your self
  • Q2. Why you want to switch
  • Q3. Past Experience
  • Q4. Salary expected
Round 2 - Technical 

(4 Questions)

  • Q1. Related to Quality assurance
  • Q2. 8D analysis steps
  • Ans. 

    8D analysis is a problem-solving method used to identify, correct, and prevent recurring problems.

    • Define the problem

    • Form a team

    • Containment actions

    • Root cause analysis

    • Corrective actions

    • Implement permanent corrective actions

    • Prevent recurrence

    • Recognize team efforts

  • Answered by AI
  • Q3. 7QC tools steps
  • Ans. 

    The 7QC tools are a set of quality control tools used for problem-solving and process improvement.

    • Identify the problem or process to be improved

    • Collect data related to the problem

    • Display data visually using tools like histograms or scatter plots

    • Analyze the data to identify root causes of the problem

    • Brainstorm and implement solutions

    • Monitor the results of the implemented solutions

    • Standardize the process to prevent recur

  • Answered by AI
  • Q4. How to handle warranty parts
  • Ans. 

    Warranty parts should be properly documented, tracked, and analyzed to identify trends and improve product quality.

    • Create a system to track warranty parts including serial numbers, dates, and reasons for return

    • Analyze warranty parts data to identify common issues and trends

    • Work with suppliers to address recurring issues and improve product quality

    • Implement corrective actions based on warranty parts analysis to prevent

  • Answered by AI
Round 3 - Case Study 

Any one past experience for quality issue

Interview Preparation Tips

Interview preparation tips for other job seekers - Be do negotiate well for your package they offer good money

I applied via Approached by Company and was interviewed in Jul 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Why you chose for quality??
  • Q2. What is quality?why you do Mechanical Engineering?
  • Ans. 

    Quality is meeting or exceeding customer expectations through consistent and reliable products or services.

    • Quality is a measure of how well a product or service meets customer needs and expectations.

    • It involves ensuring that products or services are consistent and reliable.

    • Quality is achieved through a combination of processes, systems, and people.

    • Mechanical engineering is a field that focuses on designing and developi...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Working in good environment.
With good wages ..?

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
asked in MM AUTO
Q4. what is IATF audit , cause of IATF , relationship between for IAT ... read more
Q5. What is the Physical & Chemical test of Steel Reinforcement?

I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. GD&T symbols & explanation
  • Ans. 

    GD&T symbols are used to specify geometric tolerances on engineering drawings.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the allowable variation in form and size of features on a part

    • Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position

    • GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget

  • Answered by AI
  • Q2. How to check true position on CMM
  • Ans. 

    True position on CMM can be checked using a combination of software and hardware tools.

    • Use a calibrated probe to measure the feature location

    • Compare the measured location with the nominal location

    • Calculate the deviation and compare it with the tolerance

    • Use software tools like GD&T to analyze the results

    • Ensure the CMM is calibrated and the probe is in good condition

  • Answered by AI
  • Q3. What is FMEA
  • Ans. 

    FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.

    • FMEA is used to identify potential failures in a process or product and their effects on the system.

    • It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.

    • FMEA is commonly used in industries such a...

  • Answered by AI
  • Q4. How to do instrument selection
  • Ans. 

    Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.

    • Identify the purpose of the instrument

    • Consider the accuracy and precision required

    • Evaluate the cost and availability

    • Ensure the instrument is compatible with other equipment

    • Consider the maintenance and calibration requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always have good knowledge for the things that you have added in your resume. Do not put anything that you don't know about.

Skills evaluated in this interview

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Genral diploma mechanical Related question

I applied via Walk-in and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is company production in here?
  • Ans. 

    The company production refers to the manufacturing and output of products or services by the company.

    • Company production refers to the quantity and quality of goods or services produced.

    • It includes the manufacturing process, assembly, packaging, and delivery of products.

    • Production can also involve the provision of services, such as software development or consulting.

    • The company's production may vary depending on factors...

  • Answered by AI
  • Q2. What is function of shock absorber?
  • Ans. 

    Shock absorbers are devices used in vehicles to absorb and dampen the impact of bumps and vibrations.

    • Absorb and dampen the impact of bumps and vibrations

    • Improve vehicle stability and control

    • Enhance driver and passenger comfort

    • Reduce wear and tear on other vehicle components

    • Maintain tire contact with the road surface

    • Prevent excessive bouncing and bouncing

    • Provide consistent handling and braking

    • Examples: coilover shocks,

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - First of all analysis the company details.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic questions about mathematics, grammer etc

Round 2 - Technical 

(1 Question)

  • Q1. Tell me about ur self, EC related questions, some simple coding average number, Fibonacci etc..
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Standard online aptitude tests with some written questions

Round 2 - Group Discussion 

Group assessment day, lasted 4 hours, group tasks followed by one-on-one

Interview Questionnaire 

1 Question

  • Q1. Roles and Responsibilities
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. What is 8D ,do you aware of it?
  • Ans. 

    8D is a problem-solving methodology used in quality management to identify, correct, and prevent recurring problems.

    • 8D stands for Eight Disciplines and is a structured problem-solving process.

    • It involves a team approach to thoroughly analyze a problem, identify root causes, and implement corrective actions.

    • The 8D process includes steps such as forming a team, defining the problem, implementing interim containment actio...

  • Answered by AI
  • Q2. How many quality tools are there
  • Ans. 

    There are various quality tools used in quality engineering to analyze and improve processes.

    • There are around 7 basic quality tools commonly used in quality engineering: Pareto chart, cause-and-effect diagram, check sheet, control chart, histogram, scatter diagram, and flowchart.

    • Additional quality tools include: 5 Whys, fishbone diagram, 8D methodology, Failure Mode and Effects Analysis (FMEA), Statistical Process Cont...

  • Answered by AI
  • Q3. Describe about quality tools??
  • Ans. 

    Quality tools are techniques and methodologies used to monitor, analyze, and improve processes to ensure high quality outcomes.

    • Quality tools help identify and solve quality-related issues in processes.

    • Examples include Pareto charts, fishbone diagrams, control charts, and scatter diagrams.

    • These tools can be used to track defects, analyze root causes, monitor process variations, and make data-driven decisions.

    • Quality too...

  • Answered by AI
  • Q4. Tell me about your self??
  • Q5. What is your previous experience in ??
  • Q6. What is 5s and define??
  • Ans. 

    5S is a methodology used to organize a workplace for efficiency and effectiveness.

    • Sort: Remove unnecessary items from the workplace.

    • Set in order: Organize remaining items in a logical manner.

    • Shine: Clean and inspect the work area regularly.

    • Standardize: Establish standards and procedures for maintaining the organized workplace.

    • Sustain: Ensure the 5S system is maintained and improved over time.

    • Example: Implementing 5S in...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Amara Raja Group Quality Engineer interview:
  • Quality Assurance
Interview preparation tips for other job seekers - An average non mnc ,not follows standards,senior politics are high,
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. On behalf of your past or current experience,during this period some of the question can be ask related jtekt and what is the products.
  • Q2. Work ability and punctuality
  • Q3. Flexibility and compromising in some situation.
  • Q4. Team handling and suggestions
Round 3 - Group Discussion 

Overall about your interview and personality,way of discussion and attitude,how to explain your answer and reactions.

Round 4 - HR 

(1 Question)

  • Q1. About your family and salary discussion on behalf of your interview and selected designation.

Interview Preparation Tips

Topics to prepare for JTEKT Quality Engineer interview:
  • Diploma
  • Instrumentation
  • Inspection
  • SPC
  • MSA
  • Layout
  • Metrology
  • Engineering Drawing
  • PPAP Preparation
Interview preparation tips for other job seekers - Don't be hesitate and try to complete your answer in few words but impressive words.First be a good listener,what is the interviewer wants really to you about their question..you should be first understand..where you feel you have no idea about any question you can ask for skip but don't try to make over smart.


Best wishes

DENSO Interview FAQs

How many rounds are there in DENSO Quality Engineer interview?
DENSO interview process usually has 2 rounds. The most common rounds in the DENSO interview process are Technical, HR and Case Study.
What are the top questions asked in DENSO Quality Engineer interview?

Some of the top questions asked at the DENSO Quality Engineer interview -

  1. What is quality?why you do Mechanical Engineeri...read more
  2. How to check true position on ...read more
  3. How to do instrument selecti...read more

Tell us how to improve this page.

DENSO Quality Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
DENSO Quality Engineer Salary
based on 48 salaries
₹1.1 L/yr - ₹7.4 L/yr
35% less than the average Quality Engineer Salary in India
View more details

DENSO Quality Engineer Reviews and Ratings

based on 15 reviews

4.2/5

Rating in categories

4.3

Skill development

4.0

Work-life balance

4.4

Salary

4.8

Job security

4.1

Company culture

4.5

Promotions

4.0

Work satisfaction

Explore 15 Reviews and Ratings
Assistant Manager
269 salaries
unlock blur

₹7 L/yr - ₹17.5 L/yr

Deputy Manager
173 salaries
unlock blur

₹11 L/yr - ₹24 L/yr

Engineer
164 salaries
unlock blur

₹3.6 L/yr - ₹10 L/yr

Senior Engineer
148 salaries
unlock blur

₹6 L/yr - ₹13.5 L/yr

Production Engineer
89 salaries
unlock blur

₹1.8 L/yr - ₹9 L/yr

Explore more salaries
Compare DENSO with

Bosch

4.2
Compare

Yazaki

3.8
Compare

Faurecia

3.9
Compare

Hitachi Astemo

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview