i
Endurance Technologies
Filter interviews by
The tool commonly used for Root Cause Analysis is the Fishbone Diagram (Ishikawa Diagram).
Fishbone Diagram (Ishikawa Diagram) is a visual tool used to identify the possible causes of a problem.
5 Whys technique is also commonly used for Root Cause Analysis.
Pareto Analysis can be used to prioritize the causes identified in the Fishbone Diagram.
Root Cause Analysis software like TapRooT or Apollo Root Cause Analysis can al...
CTQ stands for Critical to Quality. It is a key measurable characteristic of a product or process that is essential for customer satisfaction.
CTQs are identified based on customer requirements and expectations.
They are used to define the quality standards that must be met for a product or process to be considered successful.
Examples of CTQs include product dimensions, performance metrics, and defect rates.
CTQ parameters are critical to quality parameters that directly impact customer satisfaction. Controls are measures put in place to ensure these parameters are met.
CTQ parameters are key characteristics of a product or service that directly impact customer satisfaction
Controls are measures put in place to ensure CTQ parameters are met consistently
Examples of CTQ parameters include product dimensions, performance metric...
We use JIRA for bug tracking and TestRail for test case management. Our main supplier for testing tools is SmartBear.
JIRA for bug tracking
TestRail for test case management
Main supplier: SmartBear
Anodizing process is required to increase corrosion resistance, improve durability, enhance aesthetic appeal, and provide better adhesion for paint or other coatings.
Increases corrosion resistance by forming a protective oxide layer on the surface of the metal
Improves durability by hardening the surface of the metal
Enhances aesthetic appeal by offering a variety of color options through dyeing
Provides better adhesion f...
Customer complaint is feedback from customers regarding issues with products or services. Anticipation of defects involves proactive measures to identify and address potential issues before they occur.
Customer complaint is any feedback or concern raised by a customer regarding a product or service.
Anticipation of defects involves implementing quality control measures to identify and address potential issues before they...
Some of the soft skills I possess include strong communication, problem-solving abilities, leadership skills, and attention to detail.
Strong communication skills - able to effectively convey information and ideas
Problem-solving abilities - adept at identifying issues and finding solutions
Leadership skills - capable of guiding and motivating team members
Attention to detail - meticulous in ensuring accuracy and quality
What action required for control porosity defect through Machining process
posted on 19 Jan 2018
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.
Improving communication and personality requires self-awareness, active listening, and continuous learning.
Practice active listening to understand others' perspectives
Be aware of your own communication style and adjust as needed
Seek feedback and be open to constructive criticism
Read books or take courses on communication and interpersonal skills
Practice empathy and emotional intelligence
Be respectful and courteous in a
First impressions can be shown through body language, attire, and communication skills.
Body language can convey confidence or nervousness
Attire can show professionalism or lack thereof
Communication skills can demonstrate intelligence and articulation
Eye contact and a firm handshake can also make a positive impression
I applied via Recruitment Consultant and was interviewed in Jan 2020. There were 3 interview rounds.
MHr stands for Man-Hour. Costing is done by calculating the total number of man-hours required for a task and multiplying it by the cost per hour.
MHr stands for Man-Hour, which is a unit of measurement for the amount of work performed by an individual in one hour.
Costing is done by determining the total number of man-hours required for a specific task or project.
The cost per hour is then multiplied by the total number ...
I do not have the current pricing information for ADC 12 & plastic resins.
I apologize, but I do not have the current pricing information for ADC 12 & plastic resins.
I would need to conduct research or consult with a colleague who has access to this information.
Pricing for these materials can fluctuate frequently based on market demand and other factors.
Costing of plastic and casting parts involves analyzing material costs, production processes, and overhead expenses.
Analyze the material costs by considering the type and quantity of plastic or casting material required.
Evaluate the production processes involved in manufacturing the parts, including molding or casting techniques.
Consider the labor costs, machine costs, and energy costs associated with the production pr...
To determine the machine and tool cost for a plastic part.
Analyze the dimensions and material of the plastic part
Identify the required tolerances and surface finish
Consider the production volume and lead time
Research the available machines and their capabilities
Calculate the tooling cost based on the chosen machine
Consider the maintenance and operating costs of the machine
I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.
I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.
The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.
Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.
Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.
Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for
A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.
Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.
They are designed to capture particles that are smaller than what can be filtered by regular filters.
These filters can be made of various materials such as paper, fabric, or synthetic fibers.
Examples of size ...
Direct metalizing is applicable on materials that can conduct electricity.
Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.
The material should be able to conduct electricity for direct metalizing to be applicable.
Materials like plastic, glass, and ceramics can be direct metalized.
Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.
The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.
UV energy required for curing varies depending on the material being cured
Intensity of the UV light also affects the amount of energy required
UV energy is typically measured in Joules per square centimeter (J/cm²)
Examples of materials that require UV curing include adhesives, coatings, and inks
The amount of DFT required as per standard varies depending on the specific industry and project requirements.
The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.
Different industries may have different standards for DFT.
The complexity and size of the project also influence the amount of DFT required.
DFT techniques include scan chains, built-in self-test (BI...
I applied via Recruitment Consulltant and was interviewed before Jul 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Mar 2022. There were 2 interview rounds.
Related to manufacturing
Manufacturing of gears involves various processes including grinding which can be done through different types of grinding machines.
Gears can be manufactured through processes like hobbing, shaping, milling, and grinding.
Grinding is the process of removing material from a workpiece using a grinding wheel.
Types of grinding machines used for gear manufacturing include cylindrical grinding machines, centerless grinding ma...
based on 1 interview
Interview experience
Senior Engineer
508
salaries
| ₹2.4 L/yr - ₹8 L/yr |
Assistant Manager
295
salaries
| ₹5.5 L/yr - ₹15 L/yr |
Executive
250
salaries
| ₹4 L/yr - ₹10 L/yr |
Quality Engineer
221
salaries
| ₹1 L/yr - ₹4.8 L/yr |
Senior Production Engineer
149
salaries
| ₹2.6 L/yr - ₹7 L/yr |
JBM Group
Subros
TVS Sundram Fasteners
Spark Minda