i
Aparna Constructions and Estates
Filter interviews by
I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.
I applied via Walk-in and was interviewed in Sep 2021. There was 1 interview round.
I am looking for new challenges and opportunities for growth.
Seeking new challenges and opportunities for personal and professional growth
Want to expand my skill set and knowledge in a different environment
Desire to work with a larger team and take on more responsibilities
Looking for a company that aligns better with my long-term career goals
Gravity pressure can be calculated using the formula: P = ρgh
Gravity pressure is the pressure exerted by a fluid due to gravity
It is calculated using the formula P = ρgh, where P is pressure, ρ is density, g is acceleration due to gravity, and h is height
The unit of gravity pressure is usually in Pascals (Pa) or pounds per square inch (psi)
PRV is used in plumbing line to regulate water pressure and prevent damage to pipes and fixtures.
PRV stands for Pressure Reducing Valve.
It reduces high water pressure to a safe and manageable level.
High water pressure can cause damage to pipes, fixtures, and appliances.
PRV also helps to conserve water by reducing the amount of water wasted due to high pressure.
Examples of where PRV is used include residential homes, co
There are four types of sprinklers: upright, pendant, sidewall, and concealed.
Upright sprinklers are installed in an upright position and are used for areas with high ceilings.
Pendant sprinklers are installed in a hanging position and are used for areas with low ceilings.
Sidewall sprinklers are installed on walls and are used for narrow spaces.
Concealed sprinklers are installed above the ceiling and are hidden from vie
The standard height between WC Outlet centre to Inlet center is 6 inches.
The standard height is 6 inches or 15.24 cm.
This measurement is important for proper installation of toilets.
It ensures that the toilet will function properly and be comfortable for the user.
The measurement may vary slightly depending on the type of toilet being installed.
It is important to follow manufacturer instructions for installation.
Pump head is the measure of the height that a pump can raise water against gravity.
Pump head is calculated by adding the discharge head and suction head.
Discharge head is the height to which water is pumped.
Suction head is the height from the water level to the centerline of the pump.
Friction loss in the piping system should also be considered.
Pump head can be calculated using the following formula: Pump Head = Dischar
GI B & C Class pipes differ in thickness and weight.
GI B Class pipes have a thickness of 2.9-3.2 mm and weight of 7.91-8.44 kg/m
GI C Class pipes have a thickness of 3.2 mm and weight of 8.35 kg/m
GI B Class pipes are commonly used for water supply and irrigation systems
GI C Class pipes are commonly used for hand pumps and tube wells
I applied via Company Website and was interviewed in Sep 2021. There were 3 interview rounds.
The cost expenditure per sqm without materials depends on various factors such as location, skill level of labor, project complexity, and market conditions.
The cost expenditure per sqm without materials can vary significantly depending on the location. Labor costs tend to be higher in urban areas compared to rural areas.
The skill level of labor also affects the cost. Highly skilled laborers may charge more for their se...
BBS (Bar Bending Schedule) is prepared by calculating the number of bars required for reinforcement and their lengths.
Calculate the number of bars required for reinforcement
Calculate the length of each bar
Prepare a detailed list of all the bars required for the project
Ensure that the BBS is accurate and meets the design requirements
Use software tools like AutoCAD, Excel, etc. to prepare the BBS
Review and verify the BBS
Assignment
Assignment
Case study
Assignment
Aptitude test
Coding test
Assignment
Aparna Constructions and Estates interview questions for popular designations
Get interview-ready with Top Aparna Constructions and Estates Interview Questions
I applied via Naukri.com and was interviewed in Aug 2021. There were 5 interview rounds.
I applied via Walk-in and was interviewed in Feb 2022. There was 1 interview round.
I applied via Walk-in and was interviewed in Dec 2021. There was 1 interview round.
The thickness of mortar used in brickwork varies depending on the type of brickwork and the desired strength.
The thickness of mortar in brickwork is typically between 10mm to 15mm.
For load-bearing walls, the mortar thickness may be increased to 20mm.
In some cases, thin-bed mortar systems are used, where the thickness can be as low as 3mm.
The thickness of mortar can also vary based on the type of bricks used, such as cl
Bricks need to dry before starting the brick work to ensure proper bonding and prevent shrinkage.
Drying bricks removes excess moisture, allowing them to harden and strengthen.
Wet bricks can cause shrinkage and cracking during the drying process.
Dry bricks provide better adhesion with mortar, resulting in a stronger and more durable structure.
Moisture in bricks can lead to efflorescence, a white powdery deposit on the s...
There are different types of tiles used in toilets and living areas.
Ceramic tiles are commonly used in both toilets and living areas.
Porcelain tiles are also popular for their durability and water resistance.
In toilets, anti-slip tiles are often used to prevent accidents.
Living areas may have a variety of tiles like marble, granite, or vinyl.
Tiles with different finishes like matte, glossy, or textured can be chosen ba
The key quality that a CRM executive should have is strong communication skills.
Strong communication skills are essential for a CRM executive to effectively interact with customers, colleagues, and stakeholders.
CRM executives need to be able to clearly convey information, listen actively, and resolve conflicts.
They should be able to articulate complex ideas in a simple and understandable manner.
Effective communication ...
To handle a frustrated customer, listen actively, empathize, apologize, offer a solution, and follow up.
Listen actively to understand the customer's concerns and frustrations.
Empathize with the customer by acknowledging their emotions and showing understanding.
Apologize sincerely for any inconvenience or negative experience they have had.
Offer a solution or options to resolve the issue and meet their needs.
Follow up wi...
I applied via Approached by Company and was interviewed in Jan 2022. There was 1 interview round.
Top trending discussions
The duration of Aparna Constructions and Estates interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 89 interviews
Interview experience
based on 821 reviews
Rating in categories
Assistant Engineer
194
salaries
| ₹2.5 L/yr - ₹6.4 L/yr |
Junior Engineer
107
salaries
| ₹2 L/yr - ₹5.4 L/yr |
Senior Engineer
97
salaries
| ₹4.2 L/yr - ₹9.2 L/yr |
Engineer
86
salaries
| ₹3.8 L/yr - ₹7.5 L/yr |
Assistant Engineer - Civil
83
salaries
| ₹2.5 L/yr - ₹5.4 L/yr |
Prestige Group
Sobha
Godrej Properties
DLF