Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Aparna Constructions and Estates Team. If you also belong to the team, you can get access from here

Aparna Constructions and Estates Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Aparna Constructions and Estates Junior Engineer Interview Questions and Answers

Updated 16 Sep 2023

Aparna Constructions and Estates Junior Engineer Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Introduce yourself, Qualifications

Round 3 - Technical 

(5 Questions)

  • Q1. Practical Questions
  • Q2. Structural & BBS
  • Q3. RCC Structure Process
  • Q4. Blockwork Process
  • Q5. Plastering Process

I applied via Walk-in and was interviewed in Dec 2021. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What is the thickness of motar used in brickwork (vertical/horizontal direction)
  • Ans. 

    The thickness of mortar used in brickwork varies depending on the type of brickwork and the desired strength.

    • The thickness of mortar in brickwork is typically between 10mm to 15mm.

    • For load-bearing walls, the mortar thickness may be increased to 20mm.

    • In some cases, thin-bed mortar systems are used, where the thickness can be as low as 3mm.

    • The thickness of mortar can also vary based on the type of bricks used, such as cl

  • Answered by AI
  • Q2. Why bricks need to dry before starting the brick work
  • Ans. 

    Bricks need to dry before starting the brick work to ensure proper bonding and prevent shrinkage.

    • Drying bricks removes excess moisture, allowing them to harden and strengthen.

    • Wet bricks can cause shrinkage and cracking during the drying process.

    • Dry bricks provide better adhesion with mortar, resulting in a stronger and more durable structure.

    • Moisture in bricks can lead to efflorescence, a white powdery deposit on the s...

  • Answered by AI
  • Q3. Types of tiles used in toilets and living area
  • Ans. 

    There are different types of tiles used in toilets and living areas.

    • Ceramic tiles are commonly used in both toilets and living areas.

    • Porcelain tiles are also popular for their durability and water resistance.

    • In toilets, anti-slip tiles are often used to prevent accidents.

    • Living areas may have a variety of tiles like marble, granite, or vinyl.

    • Tiles with different finishes like matte, glossy, or textured can be chosen ba

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Aparna Constructions and Estates Junior Engineer interview:
  • Myvan
  • Quality Assurance
Interview preparation tips for other job seekers - Don't be worry during interview. Go with peace of mind . Before going to interview once go through finishing and execution work in construction

Junior Engineer Interview Questions Asked at Other Companies

asked in Tata Steel
Q1. What is the main role of Junior engineer in Electrical maintenanc ... read more
asked in JSW Steel
Q2. Buchhlz relay, what is relay, what is sensor, you read or not ele ... read more
Q3. If reactor pressure or synthesis pressure increases then how to b ... read more
Q4. What is the thickness of motar used in brickwork (vertical/horizo ... read more
Q5. What is quality,how many types of quality.5s kaizen,gd&t & ... read more

I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. About brick work marking & finishings

Interview Preparation Tips

Interview preparation tips for other job seekers - Dgm asked previous company experience. Asked questions about mention on The resume technical skills. Ask very basic questions.

Interview questions from similar companies

I applied via Company Website

Interview Questionnaire 

1 Question

  • Q1. 1) structure details 2) finishing 3) interior

Interview Preparation Tips

Interview preparation tips for other job seekers - I had given thet time written test and interview
Interview gone good and well
Round 1 - Technical 

(1 Question)

  • Q1. Which bar you are using at site
  • Ans. 

    We are using steel bars of grade Fe500D at the site.

    • We are using steel bars of grade Fe500D for construction purposes.

    • These bars have high strength and ductility.

    • They are corrosion-resistant and have good bonding with concrete.

    • We are using bars of different diameters as per the structural requirements.

    • We are following the guidelines of the Indian Standards for reinforcement steel.

    • We are ensuring proper storage and hand...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Do you know to prepare Barbending schedule
  • Ans. 

    Yes, I know how to prepare Barbending schedule.

    • I am familiar with the bar bending schedule (BBS) and its importance in construction projects.

    • I can read and interpret structural drawings to identify the required reinforcement details.

    • I have experience in using software such as AutoCAD and Excel to prepare BBS.

    • I am aware of the standard codes and practices for preparing BBS.

    • I can communicate effectively with the project ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well experience attending interview technical round went well but in further round got rejected

Interview Questionnaire 

1 Question

  • Q1. Minivan related questions

I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Draw SFD & BMD for a simply supported load.
  • Ans. 

    SFD & BMD for a simply supported load

    • SFD is a diagram that shows the variation of shear force along the length of a beam

    • BMD is a diagram that shows the variation of bending moment along the length of a beam

    • For a simply supported load, the SFD will be a straight line with a constant slope

    • The BMD will be a parabolic curve with the maximum value at the center of the beam

    • The SFD and BMD can be calculated using equations an

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was good and they asked lot of questions about Is codes and from site related questions.

Civil Engineer Interview Questions & Answers

Brigade Group user image Shanmugasundar Shanmugasundar

posted on 12 Nov 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About finishes and structural
  • Q2. About work experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. About department questions
Round 3 - Aptitude Test 

About numerical, blood relation etc.,

Round 4 - HR 

(1 Question)

  • Q1. Skills, self intro, Salary discussion
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. About Your self ? My self Ramachandra pradhan , I am from Odisha My father is farmer and my mother is house wife We are 2 brother and 1 sister , I am working in sobha may18, 2022 to January 24 , 2024 Wha...
  • Q2. What you expect salary? I want 24,000
  • Q3. How much your experience? I have a 1.5 year experience.
Contribute & help others!
anonymous
You can choose to be anonymous

Aparna Constructions and Estates Interview FAQs

How many rounds are there in Aparna Constructions and Estates Junior Engineer interview?
Aparna Constructions and Estates interview process usually has 2 rounds. The most common rounds in the Aparna Constructions and Estates interview process are HR, Resume Shortlist and Aptitude Test.
How to prepare for Aparna Constructions and Estates Junior Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Aparna Constructions and Estates. The most common topics and skills that interviewers at Aparna Constructions and Estates expect are Civil, Execution, High Rise Building, Quality Assurance and Quality Assurance Engineering.
What are the top questions asked in Aparna Constructions and Estates Junior Engineer interview?

Some of the top questions asked at the Aparna Constructions and Estates Junior Engineer interview -

  1. What is the thickness of motar used in brickwork (vertical/horizontal directi...read more
  2. Why bricks need to dry before starting the brick w...read more
  3. Types of tiles used in toilets and living a...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

SALARIES

Equitas Small Finance Bank

SALARIES

Equitas Small Finance Bank

INTERVIEWS

Aparna Constructions and Estates

No Interviews

LIST OF COMPANIES

Aparna Constructions and Estates

Locations

INTERVIEWS

Godrej Properties

No Interviews

INTERVIEWS

Aparna Constructions and Estates

No Interviews

INTERVIEWS

Kalpataru Limited

20 top interview questions

SALARIES

Equitas Small Finance Bank

Tell us how to improve this page.

Aparna Constructions and Estates Junior Engineer Interview Process

based on 3 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

Sobha Interview Questions
3.9
 • 128 Interviews
Lodha Group Interview Questions
4.0
 • 125 Interviews
DLF Interview Questions
3.9
 • 74 Interviews
Colliers India Interview Questions
3.9
 • 63 Interviews
Casagrand Interview Questions
3.8
 • 56 Interviews
Rohan Builders Interview Questions
4.1
 • 43 Interviews
View all
Aparna Constructions and Estates Junior Engineer Salary
based on 105 salaries
₹2 L/yr - ₹5 L/yr
7% less than the average Junior Engineer Salary in India
View more details

Aparna Constructions and Estates Junior Engineer Reviews and Ratings

based on 17 reviews

4.3/5

Rating in categories

4.5

Skill development

4.1

Work-life balance

3.8

Salary

4.7

Job security

4.3

Company culture

4.1

Promotions

4.4

Work satisfaction

Explore 17 Reviews and Ratings
Assistant Engineer
194 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
105 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
97 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer - Civil
83 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aparna Constructions and Estates with

Prestige Group

4.3
Compare

Sobha

3.9
Compare

Godrej Properties

3.7
Compare

DLF

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent