i
Aparna Constructions and Estates
Filter interviews by
Clear (1)
I applied via Company Website and was interviewed in Jun 2022. There were 2 interview rounds.
I applied via Walk-in and was interviewed in Feb 2022. There were 3 interview rounds.
Bricks are wet during brick work to prevent them from absorbing water from the mortar too quickly.
Wet bricks prevent the mortar from drying out too quickly, which can weaken the bond between the bricks and the mortar.
Wet bricks also help to prevent efflorescence, a white powdery substance that can form on the surface of bricks due to the migration of salts.
Bricks should be dampened, not soaked, before use.
The amount of...
The thickness of cement mortar in brickwork varies depending on the type of brick and the purpose of the wall.
For load-bearing walls, the thickness of the mortar should be 10mm for horizontal joints and 8mm for vertical joints.
For non-load-bearing walls, the thickness of the mortar can be reduced to 6mm for horizontal joints and 4mm for vertical joints.
The type of brick used can also affect the thickness of the mortar....
Chemical names of water proofing
Acrylic polymers
Bituminous coatings
Silicones
Polyurethane
Epoxy resins
Ceramic or porcelain tiles are commonly used in toilets due to their durability and water resistance.
Ceramic or porcelain tiles are commonly used in toilets
These tiles are durable and water-resistant
Other options include natural stone tiles and vinyl tiles
I expect a competitive salary based on my qualifications and experience.
Research the average salary range for Site Engineers in your area
Consider your level of experience and expertise
Factor in any additional certifications or specialized skills you possess
Be prepared to negotiate and discuss benefits package
Example: Based on my research, the average salary range for Site Engineers in this area is $60,000 to $80,000. C...
I worked as a Site Engineer at XYZ Construction Company.
Managed and supervised construction projects on-site.
Ensured compliance with building codes and regulations.
Collaborated with architects, contractors, and subcontractors.
Monitored project progress and resolved any issues that arose.
Prepared and maintained project documentation, including reports and drawings.
I applied via Walk-in and was interviewed before Jun 2022. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
Welding quality is the measure of how well a weld meets the required standards and specifications.
Welding quality is determined by factors such as weld strength, appearance, and adherence to welding procedures.
It is important to ensure that the weld is free from defects such as cracks, porosity, and incomplete fusion.
Quality control measures, such as non-destructive testing, are used to assess the integrity of the weld...
Aparna Constructions and Estates interview questions for designations
Top trending discussions
I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.
SFD & BMD for a simply supported load
SFD is a diagram that shows the variation of shear force along the length of a beam
BMD is a diagram that shows the variation of bending moment along the length of a beam
For a simply supported load, the SFD will be a straight line with a constant slope
The BMD will be a parabolic curve with the maximum value at the center of the beam
The SFD and BMD can be calculated using equations an
I applied via Walk-in and was interviewed before Aug 2022. There were 4 interview rounds.
About numerical, blood relation etc.,
I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.
I applied via Walk-in and was interviewed before Sep 2023. There were 2 interview rounds.
Cement is a binding material used in construction. Types include Portland cement, white cement, and rapid-hardening cement.
Cement is a fine powder made from limestone, clay, and other minerals.
Portland cement is the most common type used in construction.
White cement is used for architectural purposes to achieve a clean, bright finish.
Rapid-hardening cement sets quickly and is ideal for projects with tight deadlines.
Lapping of steel is the process of overlapping two pieces of steel to create a continuous connection.
Lapping is commonly used in construction to join reinforcing steel bars together.
The overlapping length is typically specified in construction drawings or codes.
Proper lapping ensures structural integrity and strength of the steel connection.
I applied via Walk-in and was interviewed in Jun 2024. There were 2 interview rounds.
I applied via Walk-in and was interviewed before Nov 2023. There was 1 interview round.
About super structure
based on 2 interviews
1 Interview rounds
based on 8 reviews
Rating in categories
Assistant Engineer
194
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
105
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
97
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
86
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer - Civil
83
salaries
| ₹0 L/yr - ₹0 L/yr |
Prestige Group
Sobha
Godrej Properties
DLF