i
Aparna Constructions and Estates
Filter interviews by
I applied via Walk-in and was interviewed in Sep 2021. There was 1 interview round.
I am looking for new challenges and opportunities for growth.
Seeking new challenges and opportunities for personal and professional growth
Want to expand my skill set and knowledge in a different environment
Desire to work with a larger team and take on more responsibilities
Looking for a company that aligns better with my long-term career goals
Gravity pressure can be calculated using the formula: P = ρgh
Gravity pressure is the pressure exerted by a fluid due to gravity
It is calculated using the formula P = ρgh, where P is pressure, ρ is density, g is acceleration due to gravity, and h is height
The unit of gravity pressure is usually in Pascals (Pa) or pounds per square inch (psi)
PRV is used in plumbing line to regulate water pressure and prevent damage to pipes and fixtures.
PRV stands for Pressure Reducing Valve.
It reduces high water pressure to a safe and manageable level.
High water pressure can cause damage to pipes, fixtures, and appliances.
PRV also helps to conserve water by reducing the amount of water wasted due to high pressure.
Examples of where PRV is used include residential homes, co
There are four types of sprinklers: upright, pendant, sidewall, and concealed.
Upright sprinklers are installed in an upright position and are used for areas with high ceilings.
Pendant sprinklers are installed in a hanging position and are used for areas with low ceilings.
Sidewall sprinklers are installed on walls and are used for narrow spaces.
Concealed sprinklers are installed above the ceiling and are hidden from vie
The standard height between WC Outlet centre to Inlet center is 6 inches.
The standard height is 6 inches or 15.24 cm.
This measurement is important for proper installation of toilets.
It ensures that the toilet will function properly and be comfortable for the user.
The measurement may vary slightly depending on the type of toilet being installed.
It is important to follow manufacturer instructions for installation.
Pump head is the measure of the height that a pump can raise water against gravity.
Pump head is calculated by adding the discharge head and suction head.
Discharge head is the height to which water is pumped.
Suction head is the height from the water level to the centerline of the pump.
Friction loss in the piping system should also be considered.
Pump head can be calculated using the following formula: Pump Head = Dischar
GI B & C Class pipes differ in thickness and weight.
GI B Class pipes have a thickness of 2.9-3.2 mm and weight of 7.91-8.44 kg/m
GI C Class pipes have a thickness of 3.2 mm and weight of 8.35 kg/m
GI B Class pipes are commonly used for water supply and irrigation systems
GI C Class pipes are commonly used for hand pumps and tube wells
I applied via Naukri.com and was interviewed before Dec 2019. There were 3 interview rounds.
Top trending discussions
OPC stands for Ordinary Portland Cement, which is a widely used type of cement in construction work.
OPC is a type of cement that is commonly used in the construction industry.
It is known for its high strength and durability.
OPC is made by grinding clinker, gypsum, and other materials.
It is used in various applications such as concrete, mortar, and plaster.
OPC is available in different grades, such as OPC 33, OPC 43, an
I applied via Naukri.com and was interviewed in Mar 2024. There were 2 interview rounds.
One meter is equal to 39.37 inches.
One meter is equivalent to 100 centimeters.
One inch is equal to 2.54 centimeters.
To convert meters to inches, multiply by 39.37 (100 * 2.54).
Steel density is typically around 7.85 g/cm^3.
Steel density is commonly expressed in grams per cubic centimeter (g/cm^3).
The density of steel can vary depending on the specific alloy composition.
For example, the density of stainless steel is around 7.9 g/cm^3, while carbon steel is around 7.85 g/cm^3.
I applied via Referral
I appeared for an interview before Mar 2024, where I was asked the following questions.
posted on 19 Mar 2025
I applied via Naukri.com and was interviewed before Aug 2023. There was 1 interview round.
A shunt relay in an ACB is used to provide protection against overcurrents by diverting excess current away from the main circuit.
Shunt relay is connected in parallel with the main circuit of the ACB.
It detects overcurrents and activates to divert the excess current through a shunt path.
This helps in protecting the main circuit from damage due to overcurrents.
Shunt relays are commonly used in Air Circuit Breakers (ACBs...
CoC in HVAC stands for Certificate of Conformance, which is a document certifying that a product meets specified requirements.
CoC in HVAC is a Certificate of Conformance that ensures a product meets specific requirements.
It is often required in HVAC projects to ensure quality and compliance.
CoC may include details such as product specifications, testing results, and manufacturer information.
Biological oxygen demand (BOD) and Chemical oxygen demand (COD) are important parameters in wastewater treatment plants.
Biological oxygen demand (BOD) is a measure of the amount of dissolved oxygen needed by aerobic biological organisms to break down organic material in water.
Carbonaceous oxygen demand (COD) is a measure of the amount of oxygen required to oxidize all the organic and inorganic matter in water.
BOD is a ...
A voltage monitoring relay is a device that monitors voltage levels and triggers an alarm or protective action if the voltage exceeds or falls below a set threshold.
Monitors voltage levels in electrical systems
Triggers alarm or protective action if voltage exceeds or falls below set threshold
Used to protect equipment from damage due to voltage fluctuations
WTP plant works on the principle of physical and chemical processes to remove impurities from water.
Water enters the plant and goes through processes like coagulation, flocculation, sedimentation, filtration, and disinfection.
Coagulation involves adding chemicals to water to make impurities clump together.
Flocculation helps in forming larger particles called floc for easier removal.
Sedimentation allows the floc to sett...
I provide daily and monthly reports on project progress, issues, and key metrics to track performance.
Daily reports include updates on tasks completed, challenges faced, and plans for the next day.
Monthly reports summarize overall progress, budget status, and any potential risks or delays.
Reports may also include key performance indicators (KPIs) such as project milestones achieved, budget variance, and resource utiliz...
based on 17 reviews
Rating in categories
Assistant Engineer
196
salaries
| ₹2.5 L/yr - ₹6 L/yr |
Junior Engineer
104
salaries
| ₹2 L/yr - ₹5 L/yr |
Senior Engineer
99
salaries
| ₹4.2 L/yr - ₹9.2 L/yr |
Engineer
87
salaries
| ₹3.8 L/yr - ₹7.5 L/yr |
Assistant Engineer - Civil
80
salaries
| ₹2.8 L/yr - ₹5.3 L/yr |
Sobha
Lodha Group
Cushman & Wakefield
Godrej Properties