Filter interviews by
UPS ensures uninterrupted power supply during power outages and protects equipment from power surges.
UPS stands for Uninterruptible Power Supply
It provides backup power during power outages
UPS also protects equipment from power surges and voltage fluctuations
UPS can be of different types such as standby, line-interactive, and online
UPS batteries need to be replaced periodically for optimal performance
HVAC systems are responsible for heating, ventilation, and air conditioning in buildings, ensuring comfort and safety.
HVAC systems regulate temperature, humidity, and air quality in indoor spaces.
They consist of various components such as furnaces, air conditioners, heat pumps, fans, and ductwork.
Safety measures include regular maintenance, proper installation, and adherence to building codes.
HVAC systems should be des...
Fire alarm and fire fighting systems are designed to detect and extinguish fires in buildings.
Fire alarm systems use sensors to detect smoke or heat and trigger an alarm to alert occupants of the building.
Fire fighting systems include sprinklers, fire extinguishers, and fire hoses.
Sprinkler systems are designed to automatically release water when a fire is detected.
Fire extinguishers are portable devices that can be us...
Power Distribution SLD is a schematic diagram that shows the distribution of power in an electrical system.
SLD stands for Single Line Diagram
It shows the flow of power from the source to the loads
It includes information about transformers, switchgear, and protective devices
It is used for design, construction, and maintenance of electrical systems
Transformers work on the principle of electromagnetic induction and require proper grounding and insulation for safety.
Transformers convert electrical energy from one circuit to another through electromagnetic induction
They consist of two coils, primary and secondary, wound around a magnetic core
The primary coil is connected to the input voltage source and the secondary coil to the load
Safety measures include proper gr...
SLD of UPS system refers to the Single Line Diagram of the system.
SLD is a graphical representation of the electrical system that shows all the components and their interconnections.
It is used to design, install, and maintain the UPS system.
SLD includes information about the power sources, distribution panels, transformers, UPS units, and loads.
It helps in identifying the fault location and isolating the faulty compone...
DG sets are backup power sources used in case of power outages. Safety measures include regular maintenance and proper ventilation.
DG sets are diesel-powered generators that provide backup power in case of power outages.
They are commonly used in hospitals, data centers, and other critical facilities.
Safety measures include regular maintenance to ensure proper functioning and prevent accidents.
Proper ventilation is also...
Water treatment systems purify water for safe consumption. Distribution involves transporting treated water to consumers.
Water treatment systems remove impurities and contaminants from water.
Common methods include filtration, sedimentation, and disinfection.
Treated water is then distributed through a network of pipes and pumps.
Distribution systems must be regularly maintained to ensure water quality.
Chlorine is often a...
Procurement of materials and approvals in engineering involve several procedures and authorities.
Identify the required materials and their specifications
Prepare a list of potential suppliers and obtain quotes
Evaluate the quotes and select the supplier
Obtain necessary approvals from concerned authorities
Place the purchase order and track the delivery
Inspect the materials upon receipt to ensure compliance with specificat
Cost saving initiatives can be implemented through various measures.
Conducting a cost analysis to identify areas of potential savings
Reducing unnecessary expenses such as travel and entertainment
Negotiating better deals with suppliers
Implementing energy-efficient practices
Encouraging remote work to reduce office space costs
Investing in automation to reduce labor costs
Consolidating operations to reduce overhead costs
Annual maintenance contract & vendor management are crucial for efficient operations.
Annual maintenance contracts should be reviewed and renewed on time.
Vendor management procedures should include regular communication and performance evaluation.
Contracts should clearly define the scope of work, timelines, and payment terms.
Vendor selection should be based on factors such as quality, reliability, and cost-effectiveness...
Capex refers to capital expenditures, while opex refers to operational expenses.
Capex is the money spent on acquiring or upgrading physical assets like property, equipment, or infrastructure.
Opex is the money spent on day-to-day operations like salaries, utilities, and maintenance.
Capex is usually a one-time expense, while opex is ongoing.
Capex is often used to increase the company's long-term value, while opex is nece...
Escalation matrix is a hierarchical process of escalating issues to higher authorities for resolution.
It is a structured process for resolving issues that cannot be resolved at lower levels.
It defines the hierarchy of authorities to be contacted in case of an issue.
It helps in timely resolution of issues by ensuring that they are escalated to the right authority.
It is commonly used in customer support, IT support, and ...
Elevators are essential for modern buildings, and their safety is crucial for passengers' well-being.
Elevators must undergo regular maintenance and inspections to ensure their safety.
Safety features such as emergency brakes, door sensors, and alarms must be installed and functioning properly.
Elevator operators must be trained and certified to operate the elevator safely.
Building codes and regulations must be followed t...
Statutory approvals are legal permissions required for a project or activity to comply with laws and regulations.
Statutory approvals are mandatory legal permissions required for any project or activity.
These approvals ensure that the project or activity complies with all the laws and regulations of the concerned authorities.
Examples of statutory approvals include building permits, environmental clearances, and licenses...
I applied via Approached by Company and was interviewed in Jan 2024. There were 5 interview rounds.
Online based test on basic aptitude and problem solving tests.
I was interviewed in Mar 2024.
Tell something about yourself.
HVAC stands for Heating, Ventilation, and Air Conditioning. It refers to the technology of indoor environmental comfort.
HVAC systems control temperature, humidity, and air quality in buildings.
Heating can be provided through furnaces, boilers, or heat pumps.
Ventilation involves exchanging indoor and outdoor air to improve air quality.
Air conditioning systems use refrigeration to cool indoor air.
HVAC systems are essenti...
Plumbing system refers to the network of pipes, fixtures, and fittings that deliver water and remove waste in a building.
Plumbing systems include pipes for water supply, drainage, and venting
Fixtures such as sinks, toilets, showers, and bathtubs are connected to the plumbing system
Plumbing systems also include valves, pumps, water heaters, and other equipment
Proper installation and maintenance of plumbing systems are e
FM 200 is a clean agent fire suppression system commonly used in data centers and other critical facilities.
FM 200 is a colorless, odorless gas that is stored in cylinders and discharged into the protected space in the event of a fire.
It works by reducing the oxygen levels in the air to a point where combustion is no longer sustainable.
FM 200 is non-toxic and leaves no residue, making it ideal for use in areas with sen...
LT panel room is a crucial part of electrical systems, housing electrical components for power distribution.
LT panel room is where the electrical distribution board is located for controlling and distributing power to various circuits.
Work sequence involves checking the incoming power supply, monitoring the load requirements, and ensuring proper distribution of power.
Regular maintenance and inspection of LT panel room ...
Knight Frank interview questions for popular designations
I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 4 interview rounds.
Roles and Responsibility
Safety in the workplace is crucial to prevent accidents, injuries, and illnesses among employees.
Ensures the well-being of employees and reduces the risk of workplace accidents
Boosts employee morale and productivity by creating a safe work environment
Compliance with safety regulations and standards to avoid legal issues
Reduces absenteeism and healthcare costs associated with workplace injuries
Enhances company reputatio
Get interview-ready with Top Knight Frank Interview Questions
I applied via Recruitment Consulltant and was interviewed in Aug 2023. There was 1 interview round.
Compliances of State government refer to the regulations and guidelines set by the state government that must be followed by building managers.
Building managers need to ensure compliance with state building codes and regulations.
They must adhere to safety standards and obtain necessary permits and licenses.
Building managers may need to comply with environmental regulations and energy efficiency requirements.
They should...
Compliances of building refer to the regulations and standards that must be followed to ensure safety, accessibility, and environmental sustainability.
Building codes and regulations set by local authorities
Fire safety measures and emergency evacuation plans
Accessibility requirements for people with disabilities
Environmental regulations for energy efficiency and sustainability
Health and safety regulations for building o...
I applied via Job Fair and was interviewed in Mar 2024. There were 2 interview rounds.
I can join within 2 months notice period or earlier.
I can join within 2 months notice period as per company policy.
I am also open to joining earlier if required by the company.
I will ensure a smooth transition during the notice period.
HVAC system stands for Heating, Ventilation, and Air Conditioning system, which is used to control the temperature, humidity, and air quality in a building.
HVAC system controls temperature, humidity, and air quality in a building
It includes components like furnaces, air conditioners, heat pumps, and ductwork
Regular maintenance is important to ensure efficient operation
HVAC systems can be centralized or decentralized
Exa...
I applied via Company Website and was interviewed in Apr 2023. There were 2 interview rounds.
I have been working as a Front Office Executive for the past 5 years in a busy corporate office.
Managed front desk operations including greeting visitors, answering phones, and handling inquiries.
Scheduled appointments and meetings for executives.
Maintained office supplies and inventory.
Assisted with administrative tasks such as data entry and filing.
Provided excellent customer service to clients and guests.
Handled inc...
The duration of Knight Frank interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 61 interviews
Interview experience
based on 707 reviews
Rating in categories
Project Engineer
145
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Project Manager
129
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
101
salaries
| ₹0 L/yr - ₹0 L/yr |
Project Manager
99
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Facility Manager
97
salaries
| ₹0 L/yr - ₹0 L/yr |
CBRE
JLL
Colliers India
Cushman & Wakefield