Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by SHYAM METALICS AND ENERGY Team. If you also belong to the team, you can get access from here

SHYAM METALICS AND ENERGY Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

SHYAM METALICS AND ENERGY Interview Questions, Process, and Tips

Updated 21 Feb 2025

Top SHYAM METALICS AND ENERGY Interview Questions and Answers

View all 103 questions

SHYAM METALICS AND ENERGY Interview Experiences

Popular Designations

97 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Dec 2024. There were 5 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is the working principle of an overload relay?
  • Ans. 

    An overload relay works by monitoring the current flowing through a motor and tripping when the current exceeds a set limit.

    • Monitors the current flowing through a motor

    • Trips and interrupts power when current exceeds a set limit

    • Protects the motor from damage due to overloading

    • Can be reset manually after tripping

  • Answered by AI
  • Q2. How is insulation resistance measured?
  • Ans. 

    Insulation resistance is measured using a megohmmeter to apply a high voltage and measure the resistance of the insulation material.

    • Use a megohmmeter to apply a high voltage to the insulation material

    • Measure the resistance of the insulation material to determine its insulation resistance

    • Insulation resistance is typically measured in megaohms (MΩ)

    • Regular insulation resistance testing helps prevent electrical failures an

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. How to face Electrical safety
  • Ans. 

    Electrical safety can be ensured by following proper procedures, using appropriate equipment, and staying vigilant.

    • Always use insulated tools when working on live circuits

    • Ensure circuits are de-energized before working on them

    • Wear appropriate personal protective equipment (PPE) such as gloves and goggles

    • Regularly inspect and maintain electrical equipment to prevent malfunctions

    • Follow safety guidelines and procedures ou

  • Answered by AI
  • Q2. What is the process for performing preventive maintenance on a motor?
  • Ans. 

    Preventive maintenance on a motor involves inspecting, cleaning, lubricating, and testing the motor to ensure optimal performance and prevent breakdowns.

    • Inspect the motor for any signs of wear or damage

    • Clean the motor and its components to remove dirt and debris

    • Lubricate moving parts to reduce friction and wear

    • Test the motor's performance using appropriate tools and equipment

    • Replace any worn out parts or components as

  • Answered by AI
Round 3 - One-on-one 

(2 Questions)

  • Q1. What strategies can you use to succeed in an interview?
  • Ans. 

    To succeed in an interview, it is important to prepare thoroughly, practice common interview questions, research the company, dress professionally, and demonstrate enthusiasm and confidence.

    • Thoroughly research the company and the position you are applying for

    • Practice common interview questions and prepare examples of your skills and experiences

    • Dress professionally and appropriately for the interview

    • Demonstrate enthusia...

  • Answered by AI
  • Q2. What is the working principle of a star-delta starter?
  • Ans. 

    A star-delta starter is used to reduce the starting current of a motor by initially connecting the motor windings in a star configuration and then switching to a delta configuration.

    • The motor windings are initially connected in a star configuration during starting to reduce the starting current.

    • After a certain period, the windings are switched to a delta configuration to achieve full speed and torque.

    • This transition fr...

  • Answered by AI
Round 4 - Technical 

(2 Questions)

  • Q1. What are undervoltage faults?
  • Ans. 

    Undervoltage faults occur when the voltage in a system drops below the normal operating level, leading to potential equipment damage or malfunction.

    • Undervoltage faults can be caused by issues such as power supply fluctuations, equipment failures, or overloaded circuits.

    • These faults can lead to equipment damage, reduced efficiency, or complete shutdown of systems.

    • Examples include a power surge causing a drop in voltage,...

  • Answered by AI
  • Q2. What are overvoltage faults?
  • Ans. 

    Overvoltage faults are electrical faults that occur when the voltage in a circuit exceeds the normal operating range.

    • Overvoltage faults can damage electrical components and equipment.

    • They can be caused by lightning strikes, power surges, or faulty equipment.

    • Protective devices like surge protectors and voltage regulators can help prevent overvoltage faults.

    • Examples include a power surge from a lightning strike damaging ...

  • Answered by AI
Round 5 - Technical 

(2 Questions)

  • Q1. What is the purpose of a thermal relay?
  • Ans. 

    A thermal relay is used to protect electrical circuits from overloads by monitoring the temperature of the circuit and tripping when it exceeds a certain threshold.

    • Monitors the temperature of the electrical circuit

    • Trips and disconnects the circuit when temperature exceeds a set limit

    • Protects against overloads and overheating

    • Commonly used in motor protection applications

  • Answered by AI
  • Q2. What is an RDOL starter?
  • Ans. 

    An RDOL starter is a type of reduced voltage starter used in electrical systems to reduce the starting current and torque of a motor.

    • RDOL stands for Reduced Direct Online starter.

    • It is used to start induction motors in a controlled manner.

    • RDOL starters reduce the voltage supplied to the motor during starting to limit the inrush current.

    • This helps in reducing mechanical stress on the motor and connected equipment.

    • Common...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Possess good skills and demonstrate a strong work ethic in the workplace.

Top SHYAM METALICS AND ENERGY Electrical Technician Interview Questions and Answers

Q1. What is the process for performing preventive maintenance on a motor?
View answer (1)

Electrical Technician Interview Questions asked at other Companies

Q1. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,ACB,MOCB,SF6 Breakers, Breake... read more
View answer (4)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Coding Test 

Multiple choices questions - (30 points ) 1.whate is the primary goal of a sales executive?a) To provide customer support ,b)To identify new business opportunities, C)To negotiate contracts, d) To manage sales teams, 2. Which of the most effective way to handle sales objectives?a)technical expertise ,b) business acumen, c) communication skills ,d)all the above, 3. What is the most effective way to handle sales obligations? a)avoidance, b) confrontation, c)active listening and addressing concerns ,d)discounting ,short answer questions (40point),case study (30,points),submission instruction,Evaluation

Round 2 - HR 

(6 Questions)

  • Q1. Can you tell me about your sales experience and background?
  • Q2. Can you describe your sales process from initial contract to closing a deal?
  • Q3. Can you describe a situations where you had to think creatively to solve a sales problem?
  • Q4. What is the sales goals?
  • Q5. Do you have any question as the company?
  • Q6. Q6.can you give an example of a successful sales pitch you have made in the past?

Interview Preparation Tips

Topics to prepare for SHYAM METALICS AND ENERGY Retail Sales Executive interview:
  • HR
  • Technical
Interview preparation tips for other job seekers - Define your goals, update your resume and online profile, expand your network

Senior Fitter Interview Questions & Answers

user image Anonymous

posted on 18 Aug 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2024. There were 5 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. What are the responsibilities of a technician concerning machine work environments, safety practices, support for work tasks, keeping up with advancements in the industry, and possessing technical knowledg...
  • Ans. 

    A technician's responsibilities include maintaining safe work environments, staying updated on industry advancements, and possessing technical knowledge.

    • Ensuring machine work environments are safe for all employees by following safety protocols and regulations

    • Supporting work tasks by efficiently completing assigned duties and collaborating with team members

    • Keeping up with advancements in the industry by attending train...

  • Answered by AI
Round 2 - Group Discussion 

The significance of soft skills in the workplace.

Round 3 - Technical 

(2 Questions)

  • Q1. What is the future of jobs in the age of automation?
  • Ans. 

    Automation will lead to job displacement but also create new opportunities in fields like robotics, AI, and data analysis.

    • Automation will lead to job displacement in certain industries such as manufacturing and transportation.

    • New job opportunities will be created in fields like robotics, artificial intelligence, and data analysis.

    • Workers will need to adapt and acquire new skills to remain competitive in the job market.

    • ...

  • Answered by AI
  • Q2. What is your experience in working with a team?
  • Ans. 

    I have extensive experience working with teams in various projects and settings.

    • Led a team of fitters in a major construction project, ensuring timely completion and quality work

    • Collaborated with engineers and other tradespeople to troubleshoot and solve complex technical issues

    • Participated in regular team meetings to discuss progress, challenges, and strategies for improvement

  • Answered by AI
Round 4 - Safety 

(2 Questions)

  • Q1. What types of safety equipment are commonly used?
  • Ans. 

    Common safety equipment includes hard hats, safety glasses, gloves, ear protection, and steel-toed boots.

    • Hard hats

    • Safety glasses

    • Gloves

    • Ear protection

    • Steel-toed boots

  • Answered by AI
  • Q2. What tools are commonly used for safety?
  • Ans. 

    Commonly used safety tools include hard hats, safety goggles, ear protection, gloves, and safety harnesses.

    • Hard hats are essential for protecting the head from falling objects.

    • Safety goggles protect the eyes from debris and chemicals.

    • Ear protection such as earplugs or earmuffs help prevent hearing damage from loud noises.

    • Gloves protect hands from cuts, burns, and chemicals.

    • Safety harnesses are used when working at heig

  • Answered by AI
Round 5 - Conveyor 

(2 Questions)

  • Q1. What are the safety devices used in conveyor belt systems?
  • Ans. 

    Safety devices in conveyor belt systems include emergency stop switches, pull cord switches, belt sway switches, and speed sensors.

    • Emergency stop switches are used to immediately stop the conveyor belt in case of emergency.

    • Pull cord switches are manual switches that can be pulled to stop the conveyor belt.

    • Belt sway switches detect any deviation from the center line of the conveyor belt and trigger an alarm or stop the ...

  • Answered by AI
  • Q2. What is the purpose and functionality of emergency stop control systems?
  • Ans. 

    Emergency stop control systems are designed to quickly and safely shut down machinery in case of an emergency.

    • Emergency stop control systems are crucial for ensuring the safety of operators and preventing accidents.

    • They are typically designed to be easily accessible and identifiable, often with a large red button that can be pressed to stop the machinery.

    • These systems are designed to override all other controls and imm...

  • Answered by AI

Senior Fitter Interview Questions asked at other Companies

Q1. What is the future of jobs in the age of automation?
View answer (2)

Senior Manager Interview Questions & Answers

user image Surendra Sahu

posted on 11 Dec 2024

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Approached by Company and was interviewed in Nov 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

Sponge iron company visit complaint attend

Round 2 - HR 

(2 Questions)

  • Q1. What is your role in the company?
  • Q2. Why do you want to join our company?
Round 3 - Technical 

(2 Questions)

  • Q1. What benefits do we receive if our company facilitates your joining?
  • Q2. What can you contribute to the company?

Interview Preparation Tips

Interview preparation tips for other job seekers - It was a great experience to give an interview at the company, and everyone’s behavior was absolutely the best.

SHYAM METALICS AND ENERGY interview questions for popular designations

 Engineer

 (7)

 Graduate Engineer Trainee (Get)

 (4)

 Assistant Electrical Engineer

 (3)

 Assistant Engineer

 (3)

 Executive Accountant

 (3)

 Assistant Manager

 (2)

 Assistant Manager Operations

 (2)

 Deputy Manager

 (2)

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Referral

Round 1 - One-on-one 

(2 Questions)

  • Q1. Do you have experience??
  • Q2. Do you have knowledge about SAP

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't worry go with highly positive attitude. Everything will be great 👍🏻

Get interview-ready with Top SHYAM METALICS AND ENERGY Interview Questions

Engineer Interview Questions & Answers

user image PRADIP MAHALI

posted on 16 Jul 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - One-on-one 

(4 Questions)

  • Q1. About yourself?
  • Q2. About your work experience in previous company?
  • Q3. Some technical questions about your job profile in previous company?
  • Q4. Checking your knowledge in respective work field as well as in your core branch?
Round 2 - HR 

(2 Questions)

  • Q1. Reason for job switch?
  • Q2. Your Expectations in this company?

Engineer Interview Questions asked at other Companies

Q1. ❖ If a team member is unable to carry out his work, he is doing it repetitively, how would you handle it?, would you like to work only on lifing of components, or would you be ready to shift to other departments?
View answer (5)

Jobs at SHYAM METALICS AND ENERGY

View all
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Yes & good ,,& wealth to increase my knowledge

Round 2 - One-on-one 

(2 Questions)

  • Q1. With accountant
  • Q2. Excel realated good in my respect

Interview Preparation Tips

Topics to prepare for SHYAM METALICS AND ENERGY Senior Accountant interview:
  • Accountant
Interview preparation tips for other job seekers - I am so good feeling for you chance me ,when I join see dream & full fill work in my respect

Senior Accountant Interview Questions asked at other Companies

Q1. Tell me about your self tax,
View answer (22)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Referral and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. FACTORY ACT 1948
  • Q2. ACCIDENT INVESTIGATION
Round 2 - HR 

(2 Questions)

  • Q1. EXPECTATION asked and negotiating badly.
  • Q2. Only negotiating nothing else.

Interview Preparation Tips

Interview preparation tips for other job seekers - They are too much confused to to which candidate to call in interview, as per there budget they not select specific criteria like they called for interview 1yr to 8year experience candidates for just budget of 19k in-hand salary, they also entertaint too much to candidate.

Safety Officer Interview Questions asked at other Companies

Q1. If you don't have any safety equipment and documents how to complete the work ?
View answer (17)
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Whats your family background

Interview Preparation Tips

Interview preparation tips for other job seekers - Please not to join in this Company.

Accounts Officer Interview Questions asked at other Companies

Q1. How can you handle entire accounts section give me some examples?
View answer (9)

Engineer Interview Questions & Answers

user image Anonymous

posted on 4 Jul 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. Hydraulics & Machinery
  • Q2. About Breakdowns
  • Q3. Charging Car Chain Breakdown
  • Q4. Loco Car & Charging Car Axle change in Breakdowns.
  • Ans. 

    Loco car & charging car axle change in breakdowns involves replacing damaged axles to ensure proper functioning of the vehicles.

    • Loco car axle change is necessary when the axle is damaged due to wear and tear or accidents.

    • Charging car axle change is required to maintain the stability and safety of the vehicle.

    • Proper maintenance and regular inspections can help prevent breakdowns related to axle issues.

    • Examples: Replacin...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your answers to the point.

Engineer Interview Questions asked at other Companies

Q1. ❖ If a team member is unable to carry out his work, he is doing it repetitively, how would you handle it?, would you like to work only on lifing of components, or would you be ready to shift to other departments?
View answer (5)

SHYAM METALICS AND ENERGY Interview FAQs

How many rounds are there in SHYAM METALICS AND ENERGY interview?
SHYAM METALICS AND ENERGY interview process usually has 2-3 rounds. The most common rounds in the SHYAM METALICS AND ENERGY interview process are Technical, Resume Shortlist and HR.
How to prepare for SHYAM METALICS AND ENERGY interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at SHYAM METALICS AND ENERGY. The most common topics and skills that interviewers at SHYAM METALICS AND ENERGY expect are Sales, Accounting, Marketing, TMT and Business Development.
What are the top questions asked in SHYAM METALICS AND ENERGY interview?

Some of the top questions asked at the SHYAM METALICS AND ENERGY interview -

  1. What is the man things the iron ore beneficiation plan...read more
  2. What type of problems during running plan...read more
  3. What is the purpose of the "STOP" button in a Siemens PLC? What is the purpose ...read more
How long is the SHYAM METALICS AND ENERGY interview process?

The duration of SHYAM METALICS AND ENERGY interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

SHYAM METALICS AND ENERGY Interview Process

based on 110 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 836 Interviews
JSW Steel Interview Questions
3.9
 • 580 Interviews
Adani Power Interview Questions
3.9
 • 215 Interviews
NTPC Interview Questions
4.2
 • 159 Interviews
Coal India Interview Questions
4.0
 • 60 Interviews
Vedanta Limited Interview Questions
3.8
 • 45 Interviews
Nalco Interview Questions
4.2
 • 22 Interviews
View all

SHYAM METALICS AND ENERGY Reviews and Ratings

based on 882 reviews

3.6/5

Rating in categories

3.4

Skill development

3.5

Work-life balance

3.3

Salary

3.4

Job security

3.2

Company culture

3.0

Promotions

3.3

Work satisfaction

Explore 882 Reviews and Ratings
Digital Marketing Manager

Kolkata

3-8 Yrs

Not Disclosed

Internal Audit Head

Kolkata

15-24 Yrs

Not Disclosed

Explore more jobs
Engineer
204 salaries
unlock blur

₹2.1 L/yr - ₹5.6 L/yr

Assistant Engineer
191 salaries
unlock blur

₹1.5 L/yr - ₹4.2 L/yr

Senior Engineer
170 salaries
unlock blur

₹3.3 L/yr - ₹8.2 L/yr

Assistant Manager
162 salaries
unlock blur

₹3.5 L/yr - ₹9 L/yr

Mechanical Engineer
71 salaries
unlock blur

₹2 L/yr - ₹5.8 L/yr

Explore more salaries
Compare SHYAM METALICS AND ENERGY with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview