SHYAM METALICS AND ENERGY Assistant Manager Operations Interview Questions and Answers

Basic subjective about your branch

Any topic discussion between 5 candidates

Q1. About your self and job location
Add your answer
Q2. Why u want to join our company
Add your answer
Q3. Why we should hire u
Add your answer

Q1. What are your job responsibilities in your previous plant?
Add your answer
Q2. What are the safety interlocks in boiler and turbine?
Ans. 
Safety interlocks in boiler and turbine are mechanisms designed to prevent unsafe conditions and protect equipment.
• Safety valves to release excess pressure in the boiler

• Flame detectors to ensure proper combustion in the boiler

• Emergency stop buttons to shut down the turbine in case of a malfunction

• Temperature sensors to monitor and control the temperature in the boiler and turbine

• Pressure switches to prevent overpressur
Answered by AI
Add your answer
Q3. How many overspeed trips are generally set in turbines?
Ans. 
The number of overspeed trips set in turbines varies depending on the type and size of the turbine.
• The number of overspeed trips set in turbines can range from 1 to 3, depending on the manufacturer and design of the turbine.

• Overspeed trips are safety mechanisms that are designed to shut down the turbine if it exceeds its maximum safe operating speed.

• Some turbines may have adjustable overspeed trip settings to allow for...read more
Answered by AI
Add your answer
Q4. What are the reasons for ACC vacuum low during rain?
Ans. 
ACC vacuum may be low during rain due to water entering the system and affecting the vacuum pressure.
• Water entering the ACC system can disrupt the vacuum pressure

• Moisture can cause blockages in the system, leading to low vacuum levels

• Leaks in the system can allow water to enter and affect the vacuum pressure
Answered by AI
Add your answer

Q1. Technical questions production effecency
Add your answer
Q2. Pellet yeld,flow sheet
Add your answer

Basic subjective about your branch

Any topic discussion between 5 candidates

Q1. About your self and job location
Add your answer
Q2. Why u want to join our company
Add your answer
Q3. Why we should hire u
Add your answer

Q1. Explain heat treatment process ?
Ans. 
Heat treatment is a process of heating and cooling metals to alter their physical and mechanical properties.
• The process involves heating the metal to a specific temperature and holding it there for a certain amount of time.

• The metal is then cooled at a controlled rate to achieve the desired properties.

• Heat treatment can be used to increase the hardness, strength, toughness, and ductility of metals.

• Examples of heat trea...read more
Answered by AI
Add your answer
Q2. What is the difference between tubes and pipe?
Ans. 
Tubes are used for fluids and gases, while pipes are used for structural purposes.
• Tubes have a smaller diameter than pipes.

• Tubes are often used in industries like pharmaceuticals and food processing.

• Pipes are commonly used in construction and infrastructure projects.

• Tubes are often seamless, while pipes can be either seamless or welded.

• Tubes are more flexible than pipes.
Answered by AI
Add your answer
Q3. What is the formula of slip factor & Q factor?
Ans. 
Slip factor formula is (N1-N2)/N1 and Q factor formula is Q = Qh/Ql
• Slip factor is used to measure the difference between synchronous speed and actual speed of a motor

• Q factor is used to measure the quality of a resonant circuit

• N1 and N2 are the synchronous speed and actual speed of the motor respectively

• Qh and Ql are the high and low energy stored in the resonant circuit respectively
Answered by AI
Add your answer
Q4. Types of Material defects
Ans. 
Material defects can be classified into various types based on their nature and impact on the product.
• Dimensional defects - variations in size or shape

• Surface defects - scratches, cracks, pits, etc.

• Physical defects - porosity, inclusions, voids, etc.

• Chemical defects - impurities, contamination, etc.

• Performance defects - failure to meet functional requirements

• Examples - warped plastic parts, corroded metal components, s
Answered by AI
Add your answer
Q5. Pipe weight formula for steel
Ans. 
The pipe weight formula for steel is based on the dimensions of the pipe.
• The formula is: (outer diameter - wall thickness) x wall thickness x 0.02466 = kg/meter

• The weight of the pipe can also be calculated using the density of steel and the volume of the pipe.

• Different types of steel have different densities, so the weight formula may vary depending on the type of steel used.
Answered by AI
Add your answer
Q6. What is drawing force for one tube ?
Ans. 
Drawing force is the force required to pull a tube through a die or a mandrel.
• Drawing force is an important parameter in tube drawing process.

• It is the force required to pull a tube through a die or a mandrel.

• It is influenced by various factors such as material properties, die angle, lubrication, etc.

• Higher drawing force indicates higher deformation and can lead to defects like cracking or tearing.

• Drawing force can be ...read more
Answered by AI
Add your answer

Q1. What is your expectation?
Ans. 
My expectation is to contribute to the growth and success of the company by utilizing my skills and experience in operations management.
• I expect to have clear goals and objectives to work towards.

• I expect to be given the necessary resources and support to achieve those goals.

• I expect to work in a collaborative and inclusive environment.

• I expect to have opportunities for professional development and growth.

• I expect to b...read more
Answered by AI
Add your answer
Q2. Notice period for your current employer
Add your answer