Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by SHYAM METALICS AND ENERGY Team. If you also belong to the team, you can get access from here

SHYAM METALICS AND ENERGY Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) Interview Questions, Process, and Tips

Updated 16 Apr 2023

Top SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) Interview Questions and Answers

SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) Interview Experiences

4 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. How blast furnace works ?
  • Ans. 

    Blast furnace is a smelting furnace used to extract iron from iron ore.

    • Iron ore, coke, and limestone are added to the top of the furnace.

    • Hot air is blown into the bottom of the furnace to create a high temperature.

    • The coke reacts with the hot air to produce carbon monoxide, which reduces the iron ore to iron.

    • The limestone reacts with impurities in the iron ore to form slag, which is removed from the bottom of the furna...

  • Answered by AI
  • Q2. What is sinter? And how to make sinter in sinter plant and
  • Ans. 

    Sinter is a high-quality raw material used in blast furnaces. It is made by heating iron ore fines and other materials.

    • Sintering is a process of compacting and forming a solid mass of material by heat or pressure without melting it.

    • In a sinter plant, iron ore fines, coke breeze, limestone, and other additives are mixed and granulated.

    • The granulated mixture is then fed onto a sinter machine, where it is heated to form a...

  • Answered by AI
  • Q3. What is the different sizes of sinter?
  • Ans. 

    Sinter is a porous material formed by heating a mixture of iron ore fines, limestone, and coke breeze. The size of sinter varies depending on its intended use.

    • Sinter is used in the production of iron and steel.

    • The size of sinter can range from small pellets to large blocks.

    • The size of sinter is determined by the size of the sintering machine used.

    • Sinter can be classified into different sizes such as fine, coarse, and l...

  • Answered by AI
  • Q4. Which iron forms in blast furnace?
  • Ans. 

    The iron formed in blast furnace is pig iron.

    • Pig iron is the product of smelting iron ore with coke and limestone in a blast furnace.

    • It is a brittle material with high carbon content and contains impurities like sulfur, phosphorus, and silicon.

    • Pig iron is further processed to produce steel or cast iron.

    • The composition of pig iron varies depending on the quality of the iron ore and the process used in the blast furnace.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confidence in your answers asking by the interviewer and try to speak in English

I applied via Newspaper Ad and was interviewed before Aug 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

All basic Question from Electrical machine,power systems etc

Round 2 - Technical 

(1 Question)

  • Q1. All electrical question from electrical machine, power system,control etc.
Round 3 - Technical 

(1 Question)

  • Q1. Electrical HOD ASKING QUESTIONS ALL TECHNICAL

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

I applied via Company Website and was interviewed in Aug 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic Questions in B.tech syllabus like a Electrical machine, Switch gear & protection etc, power Electronics.

Interview Preparation Tips

Interview preparation tips for other job seekers - At first you Concept clear your B.tech Subject (Electrical machine, Switchgear& Protection, power electronics etc)

I applied via Referral and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About electrical equipment,some formula , about brekers , transformer , about law.

Interview Preparation Tips

Interview preparation tips for other job seekers - Before giving any interview pripaire your basic all about electrical engineering

SHYAM METALICS AND ENERGY interview questions for designations

 Production Graduate Engineer Trainee

 (1)

 Engineer Trainee

 (1)

 Electrical GET

 (2)

 Electrical Maintenance Engineer Trainee

 (1)

 Management Trainee

 (1)

 Assistant Engineer

 (3)

 Electrical Engineer

 (2)

 Executive Engineer

 (1)

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. About the family
  • Q2. Tell us something about your job profile
  • Ans. 

    As a Graduate Engineer Trainee, my job profile involves learning and applying engineering concepts in real-world scenarios.

    • I will be working under the guidance of experienced engineers to gain practical knowledge.

    • I will be involved in various projects and tasks related to my field of study.

    • I will be responsible for analyzing data, creating reports, and presenting my findings to the team.

    • I will be expected to learn new ...

  • Answered by AI
  • Q3. Why is the frame of bicycle hollow
  • Ans. 

    The frame of a bicycle is hollow to reduce weight and increase maneuverability.

    • Hollow frame reduces weight and makes it easier to handle

    • Allows for better shock absorption

    • Enables internal cable routing for a cleaner look

    • Examples of materials used for hollow frames include aluminum, carbon fiber, and titanium

  • Answered by AI
  • Q4. Two stroke and four stroke engine

Interview Preparation Tips

Round: Technical + HR Interview
Experience: Keep it simple.. Your education, family members and their profession

I applied via Referral and was interviewed before Jan 2017. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Give your introduction. Why you want to do the job?
  • Ans. 

    I am a recent graduate with a strong passion for engineering and a desire to learn and grow in a professional environment.

    • I have a solid educational background in engineering, with a focus on [specific field or specialization].

    • I am eager to apply my theoretical knowledge to practical projects and gain hands-on experience.

    • I am excited about the opportunity to work with a team of experienced engineers and learn from thei...

  • Answered by AI
  • Q2. What are the subjects in 4th Sem of BTech in your branch.
  • Ans. 

    The subjects in the 4th semester of BTech vary depending on the branch.

    • Some common subjects in the 4th semester of BTech include Data Structures, Digital Electronics, Signals and Systems, and Electromagnetic Theory.

    • For example, in the Computer Science branch, subjects like Database Management Systems and Operating Systems may be included.

    • In the Mechanical Engineering branch, subjects like Fluid Mechanics and Thermodyna...

  • Answered by AI
  • Q3. What is CRO and it works? What is voltmeter, ammeter, potentiometer, rectifier and does it works with an example.
  • Ans. 

    CRO stands for Cathode Ray Oscilloscope. It is an electronic device used to visualize and analyze electrical signals.

    • CRO is used to display waveforms and measure voltage, frequency, and time intervals.

    • It works by generating an electron beam that is deflected by the input signal and displayed on a screen.

    • CROs are commonly used in electronics, telecommunications, and engineering fields.

    • Example: A CRO can be used to analy...

  • Answered by AI
  • Q4. Tell me something about NALCO and what is the procedure to produce alluminium
  • Ans. 

    NALCO is a leading aluminium producer. The procedure to produce aluminium involves several steps.

    • NALCO is short for National Aluminium Company Limited.

    • It is a public sector enterprise in India.

    • NALCO is involved in the mining, refining, and smelting of bauxite to produce aluminium.

    • The procedure to produce aluminium includes mining bauxite, refining it into alumina, and then smelting alumina to obtain aluminium metal.

    • Bau...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: 60% through out Career

General Tips: The interview last for 20-30 minutes.The questions asked to me were related to my BTech curriculum i.e. instrumentation related topics.You should be calm and use your presence of mind.I was able to answer most of the questions asked by the interviewer.
Skills: Communication, Body Language
Duration: 1-3 Months

Interview Questionnaire 

1 Question

  • Q1. HR interview and technical interview were merged

Interview Preparation Tips

Round: Test
Experience: Almost every one was shortlisted for appearing in test. Test was technical+ quantitative aptitude+ reasoning+ comprehension. Technical obviously held most of weightage.
Tips: Be thorough with the concept. Iron and steel making, casting, forming are the most important topics.

Round: Technical Interview
Experience: Basic question to check your common sense. Mostly the work flow, procedure to do certain experiment or casting or test.
Tips: must have basic knowledge about company. please go through website before appearing for interview. Know your resume thoroughly.All the best!

Skill Tips: Don't try to remember too many things. Try to understand the basic concepts.
Skills: confidence, Understanding about subjects
College Name: IIT KHARAGPUR

I was interviewed before Feb 2016.

Interview Questionnaire 

2 Questions

  • Q1. ON MACHINE
  • Q2. AND POWER SYSTEM

Interview Preparation Tips

Round: Test
Experience: NORMAL QUESTION .60% IS REQUIRED FOR SELECTION.
Duration: 1 hour 30 minutes

Round: Group Discussion
Tips: GOOD IN CURRENT AFFAIR.
Duration: 10 minutes

Round: Technical Interview
Experience: INTERVIEW IS GOOD.THERE ARE 4 MEMBER.THEY ARE VERY HUMBLE.QUESTION MAINLY FOCUSED ON BASIC CONCEPT.FOR EX- EXPLAIN REAL AND REACTIVE POWER.
WHY P.F.OF INDUSTRIES IS NOT UNITY...etc.
Tips: BE GOOD IN BASIC CONCEPT .

Round: HR Interview
Experience: NORMAL QUESTIONS,WHICH ARE GENERALLY BEING ASK IN HR.
Tips: CONFIDENCE IS MUST.

College Name: L. D. College of Engineering

Interview Questionnaire 

1 Question

  • Q1. Only Technical Interview; no GD+HR Interview

Interview Preparation Tips

Round: Test
Experience: All applicants were called for online test conducted by Cocubes.com. Test was Quantitative Aptitude+Reasoning+Comprehension+Technical. Test was quite easy. Basically it was an elimination round.
Tips: Question Paper was lengthy. So, speed is the only important factor.

Round: Technical Interview
Experience: My interview lasted around 40 minutes. They asked questions only from two subjects a)Design of RC Structures b)Structural Analysis. In case of RC Structure they asked each and every topic which were there in our syllabus. And from Structural Analysis part they gave me some numerical problems and told me to explain step by step procedure.
Tips: Go through all the theories and concepts of these two subjects.

General Tips: Try to speak as much as you can in the interview. They basically check the confidence in you.They are more interested at the practical things than the theoretical parts. Be prepared for the interview and be confident.
Skill Tips: Both RC Structure (CE31001) and Concrete lab (CE39007) are very very important.
Skills: Confidence , SAP 2000 basics, subject understanding
College Name: IIT KHARAGPUR
Motivation: JSPL is a reputed company and also a core company for our department.

Interview Preparation Tips

Round: Test
Experience: All those who had applied were called for online test conducted by Cocubes.com. Duration of the test was 1.5 hrs. 45 aptitude questions and 45 core civil engineering questions were asked. The written test round was an elimination round.

Round: Group Discussion
Experience: It was not an elimination round and the topic was "Control of Corruption OR Growth of Economy?" Others GD topics were Lokpal Bill etc. the round was to judge people and their ability to stand in a group and to earn the team dynamics of people.

Round: HR Interview
Experience: There were both HR and technical questions in my interview. In the HR question there was no such out of the blue question. They asked about me, my strengths and weakness, about my interests. They also asked me about my long term and short term goals and examples on my ability to handle crux situations.
In the technical questions they asked me questions about :Geotechnical Engg. (All basics)
Hydraulics Engg. (Basics of pipe flow and channel flow)Structures (BMD etc.)
They just wanted to check you knowledge or your core areas. The interviewer who was asking me questions was very knowledgeable. He was a great fan of Professor A.K.Jain (a faculty member at IIT Roorkee) and his book, and hence talked a lot about him.

College Name: IIT ROORKEE
Contribute & help others!
anonymous
You can choose to be anonymous

SHYAM METALICS AND ENERGY Interview FAQs

How many rounds are there in SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) interview?
SHYAM METALICS AND ENERGY interview process usually has 3 rounds. The most common rounds in the SHYAM METALICS AND ENERGY interview process are Technical, Resume Shortlist and Aptitude Test.
What are the top questions asked in SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) interview -

  1. What is sinter? And how to make sinter in sinter plant ...read more
  2. Which iron forms in blast furna...read more
  3. what is the different sizes of sint...read more

Recently Viewed

INTERVIEWS

Himadri Speciality Chemical

No Interviews

INTERVIEWS

Agumentik Group of Companies

No Interviews

INTERVIEWS

Himadri Speciality Chemical

No Interviews

INTERVIEWS

Himadri Speciality Chemical

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Himadri Speciality Chemical

No Interviews

INTERVIEWS

Himadri Speciality Chemical

No Interviews

INTERVIEWS

Himadri Speciality Chemical

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

Ernst & Young

No Interviews

Tell us how to improve this page.

SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) Salary
based on 28 salaries
₹1.1 L/yr - ₹5 L/yr
20% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

SHYAM METALICS AND ENERGY Graduate Engineer Trainee (Get) Reviews and Ratings

based on 11 reviews

3.8/5

Rating in categories

3.8

Skill development

3.7

Work-life balance

2.3

Salary

3.5

Job security

2.7

Company culture

2.5

Promotions

2.4

Work satisfaction

Explore 11 Reviews and Ratings
Engineer
205 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
190 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
163 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
160 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
71 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SHYAM METALICS AND ENERGY with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview