i
Larsen & Toubro Limited
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via LinkedIn and was interviewed in Dec 2024. There were 2 interview rounds.
Just Normal aptitude and question from domain
I am a highly motivated and experienced professional with a strong background in marketing and sales.
Over 10 years of experience in marketing and sales
Proven track record of exceeding sales targets
Strong communication and negotiation skills
Expertise in developing and implementing marketing strategies
Proficient in market research and analysis
My hobbies include reading, hiking, and painting.
Reading: I enjoy diving into a good book and exploring different genres.
Hiking: I love spending time outdoors, exploring nature trails and challenging myself physically.
Painting: I find relaxation and creativity in expressing myself through art.
I applied via Recruitment Consulltant and was interviewed in Oct 2024. There were 2 interview rounds.
130 questions in 120 min
I applied via Campus Placement and was interviewed in Oct 2023. There was 1 interview round.
3 phase induction motor works on the principle of electromagnetic induction to generate rotating magnetic field.
Three phase AC current is supplied to stator windings, creating a rotating magnetic field.
This rotating magnetic field induces current in rotor windings, causing rotor to rotate.
Speed of rotation is slightly less than synchronous speed due to slip.
Commonly used in industrial applications for driving pumps, co
Types of circuit breakers include thermal, magnetic, and hybrid.
Thermal circuit breakers operate based on the heat generated by excessive current flow.
Magnetic circuit breakers operate based on the strength of the magnetic field produced by excessive current flow.
Hybrid circuit breakers combine features of both thermal and magnetic circuit breakers.
Other types include oil circuit breakers, air circuit breakers, and vac
Types of electrical motors include AC motors (induction, synchronous), DC motors (brushed, brushless), and special types like stepper motors.
AC motors: induction, synchronous
DC motors: brushed, brushless
Special types: stepper motors
Examples: Induction motor, Synchronous motor, Brushed DC motor, Brushless DC motor, Stepper motor
A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).
Rectifiers are used in power supplies and electronic devices to convert AC to DC.
Types of rectifiers include half-wave, full-wave, and bridge rectifiers.
Half-wave rectifiers only allow one half of the AC waveform to pass through.
Full-wave rectifiers allow both halves of the AC waveform to pass through.
Bridge rectifiers use...
Electrical hazards are potential dangers posed by electricity, which can cause harm or injury if not properly managed.
Identify potential electrical hazards in the workplace
Implement proper safety measures such as using insulated tools and wearing appropriate personal protective equipment
Regularly inspect and maintain electrical equipment to prevent malfunctions
Provide training to employees on how to safely work with el...
What people are saying about Larsen & Toubro Limited
I applied via Campus Placement and was interviewed in Sep 2023. There were 4 interview rounds.
I come from a close-knit family with diverse backgrounds and interests.
I have two siblings, an older brother and a younger sister.
My parents are both doctors, and they have instilled in me a strong work ethic and a passion for helping others.
We enjoy spending quality time together, whether it's going on family vacations or simply having dinner together every night.
My family has always been supportive of my goals and as...
A cantilever beam is a structural element that is supported at one end and carries a load at the other end.
Cantilever bridges, such as the Forth Bridge in Scotland
Diving boards
Overhanging balconies
Shelves attached to a wall
Flagpoles
Types of gear include mechanical, electronic, and digital gear.
Mechanical gear uses physical components to transmit power or motion, such as gears, pulleys, and belts.
Electronic gear uses electronic components to control or manipulate signals, such as transistors, diodes, and integrated circuits.
Digital gear refers to devices that process and transmit digital information, such as computers, smartphones, and digital cam
SI engines are more efficient at low loads, while CI engines are more efficient at high loads.
SI engines (Spark Ignition) use a spark plug to ignite the fuel-air mixture, while CI engines (Compression Ignition) rely on compression to ignite the fuel.
SI engines are typically used in gasoline-powered vehicles, while CI engines are commonly found in diesel-powered vehicles.
SI engines have higher thermal efficiency at low ...
Entropy is a measure of disorder or randomness in a system, while enthalpy is the heat content of a system.
Entropy is a thermodynamic property that quantifies the degree of randomness or disorder in a system.
Enthalpy is the total heat content of a system, including both its internal energy and the work done on or by the system.
Entropy tends to increase in spontaneous processes, leading to a more disordered state.
Enthal...
The first law of thermodynamics states that energy cannot be created or destroyed, only transferred or converted.
Energy is conserved in any thermodynamic process.
It can change forms, such as from heat to work or vice versa.
The total energy of a closed system remains constant.
Mathematically expressed as ΔU = Q - W, where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by th...
Youth in Politics
Youth involvement in politics is crucial for a vibrant democracy
Young people bring fresh perspectives, innovative ideas, and energy to the political arena
They can advocate for issues that directly affect their generation, such as climate change or education reform
Youth participation can help bridge the generational gap and promote intergenerational dialogue
Examples: The election of Emmanuel Macron as t...
Larsen & Toubro Limited interview questions for designations
posted on 12 Jun 2024
Moderate level questions were asked and 4 Sections are included
Yes, reinforced concrete is a type of concrete that has steel bars or mesh embedded within it to increase its strength.
Reinforced concrete is a composite material where the concrete provides the compressive strength and the steel reinforcement provides the tensile strength.
The steel reinforcement can take the form of bars, mesh, or fibers, and is placed strategically within the concrete to resist tension forces.
Reinfor...
Volume of steel is calculated by multiplying the area of the steel by its thickness.
Volume of steel = Area of steel x Thickness
Area of steel can be calculated using the formula for the shape of the steel (e.g. rectangle, circle)
Thickness is the measurement of how thick the steel is
Get interview-ready with Top Larsen & Toubro Limited Interview Questions
I applied via campus placement at Don Bosco Institute of Technology, Mumbai and was interviewed in May 2023. There were 3 interview rounds.
In the aptitude, there was Quants, Logical Reasoning, Verbal Reasoning and Domain questions. Quants, Logical and Verbal each had 30 questions and Domain section had 40 questions. Domain section was the toughest while the other sections were extremely easy. quants questions consisted of finding average, number series and other simple questions. Logical reasoning had diagrams, pattern recognition etc. and Verbal Reasoning had finding antonyms, synonyms, complete the following sentence etc. for domain section, it is advisable to prepare your domain specific theory extremely well and also have a firm grip on numericals as well.
Two stroke engines have power strokes every revolution, while four stroke engines have power strokes every other revolution.
Two stroke engines have a simpler design with fewer moving parts compared to four stroke engines.
Two stroke engines require a fuel-oil mixture for lubrication, while four stroke engines have a separate oil reservoir.
Two stroke engines are lighter and have a higher power-to-weight ratio than four s...
Ultimate tensile strength of a material is measured by subjecting a sample to a tensile test until it fractures.
Ultimate tensile strength is the maximum stress a material can withstand before breaking.
To measure it, a sample of the material is pulled in a tensile testing machine until it fractures.
The force applied to the sample is continuously measured, and the stress is calculated by dividing the force by the cross-s...
Stress strain curves show the relationship between stress and strain in materials.
Ductile materials have a gradual yielding and necking process on the curve.
Brittle materials have a sudden fracture after reaching the ultimate strength.
Ductile materials show higher toughness compared to brittle materials.
Examples of ductile materials include steel and aluminum.
Examples of brittle materials include ceramics and glass.
A diesel engine consists of several parts that work together to convert fuel into mechanical energy.
Cylinder block: houses the cylinders and other major components
Piston: moves up and down inside the cylinder to compress air and fuel mixture
Crankshaft: converts linear motion of pistons into rotational motion
Camshaft: controls the opening and closing of valves
Fuel injectors: deliver fuel into the combustion chamber
Turbo...
In 5 years, I see myself as a highly skilled and experienced engineer, leading and managing projects, and making significant contributions to the company's growth.
Leading and managing engineering projects
Gaining expertise in my field
Contributing to the company's growth
Building a strong professional network
Continuing professional development through training and certifications
I applied via Campus Placement and was interviewed in Dec 2023. There was 1 interview round.
130 questions in 120 minutes test
I applied via Campus Placement and was interviewed in Aug 2023. There were 2 interview rounds.
First Round was Apti+Technical test
Some of the top questions asked at the Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview -
The duration of Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 27 interviews
6 Interview rounds
based on 80 reviews
Rating in categories
Assistant Manager
3.9k
salaries
| ₹6.5 L/yr - ₹18 L/yr |
Senior Engineer
3.5k
salaries
| ₹3.8 L/yr - ₹13 L/yr |
Manager
1.3k
salaries
| ₹9 L/yr - ₹30 L/yr |
Engineer
1.2k
salaries
| ₹1.6 L/yr - ₹9 L/yr |
Assistant Construction Manager
1.2k
salaries
| ₹6 L/yr - ₹21 L/yr |
Tata Group
Reliance Industries
Adani Group
Mahindra & Mahindra