Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Larsen & Toubro Limited Team. If you also belong to the team, you can get access from here

Larsen & Toubro Limited Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Larsen & Toubro Limited Graduate Engineer Trainee (Get) Interview Questions, Process, and Tips

Updated 13 Mar 2025

Top Larsen & Toubro Limited Graduate Engineer Trainee (Get) Interview Questions and Answers

View all 105 questions

Larsen & Toubro Limited Graduate Engineer Trainee (Get) Interview Experiences

96 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Easy aptitude test , but lengthy

Round 2 - Technical 

(1 Question)

  • Q1. Basic questions on all core topics were ASKED

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic aptitude knowledge is required
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jul 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

The test was easy and covered all topics from our department

Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Which subject do you like most

Interview Preparation Tips

Interview preparation tips for other job seekers - It will be easy but have to be confident

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

There was both aptitude and coding test

Round 2 - Technical 

(1 Question)

  • Q1. Here i have gone through the process went well actually asked oops, dbms and java mainly

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare well its easy actually but i didnt clear my interview
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Round 1 is aptitude test just normal verbal ability, numerical ability, reasoning questions and last section is subject related questions (as I'm from civil engineering background they asked questions related to Civil)

Round 3 - Technical 

(4 Questions)

  • Q1. 1) introduce yourself (with family background) 2) internship questions 3) why we provide cover? 4) code specifications for cover for different structural members?
  • Q2. 5) tests done in concrete technology lab 6) asked about specific gravity test
  • Q3. Your favourite subject?(based on that they asked questions related to that subject)
  • Q4. What is strength of concrete? Define
  • Ans. 

    Strength of concrete refers to its ability to resist external forces and maintain its shape and integrity.

    • Strength of concrete is measured in terms of its compressive strength, which is the maximum amount of force it can withstand before it fails.

    • The strength of concrete depends on the ratio of cement, water, and aggregates used in its mixture.

    • Concrete gains strength over time as it cures and hardens, with most of the ...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview:
  • Internship
  • Project
  • Concrete technology
  • Transportation
Interview preparation tips for other job seekers - Choose one subject that you're perfect in and tell them that is your favourite subject. Don't panic answer whatever you know. Their questions depend on your answers so be careful what you answer

Larsen & Toubro Limited interview questions for designations

 Graduate Engineer Trainee(Get) Civil

 (1)

 Graduate Trainee

 (15)

 Production Graduate Engineer Trainee

 (4)

 Post Graduate Engineer Trainee

 (3)

 Mechanical Graduate Engineer Trainee

 (1)

 Graduate Commercial Trainee

 (4)

 Engineer Trainee

 (13)

 Graduate Engineer

 (5)

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. One extempore round then technical questions from SOM, Material Science, Thermodynamics, Manufacturing Processes, etc. Then some HR questions like family background, willing to relocate or not, preferred d...

Get interview-ready with Top Larsen & Toubro Limited Interview Questions

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

It was hard like aptitude and all things.

Round 2 - Technical 

(2 Questions)

  • Q1. Oops,dbms,big data
  • Q2. Speak two mins on any topic that they wull give

Interview Preparation Tips

Interview preparation tips for other job seekers - keep calm
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before Jan 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basics of Software Engineering, Coding MCQs, Networking, Operating System

Round 2 - Technical 

(2 Questions)

  • Q1. Explain class in C#?
  • Ans. 

    A class in C# is a blueprint for creating objects that define properties, methods, and events.

    • Classes are used to create objects in C#.

    • They can have fields, properties, methods, and events.

    • Classes can be inherited by other classes.

    • Example: class Car { public string model; public void Start() { //code here } }

  • Answered by AI
  • Q2. Explain Data Lake Architecture
  • Ans. 

    Data Lake Architecture is a storage repository that holds a vast amount of raw data in its native format until needed.

    • Data Lake stores structured, semi-structured, and unstructured data.

    • It allows for data to be stored at a low cost and in its original form.

    • Data can be accessed and analyzed quickly for insights and decision-making.

    • Data Lake architecture typically includes data ingestion, storage, and processing layers.

    • E...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. What is your 5-year Career Plan?
  • Ans. 

    To gain experience in various engineering roles, pursue advanced education, and eventually become a project manager.

    • Gain hands-on experience in different engineering disciplines

    • Pursue advanced education or certifications to enhance skills

    • Work towards becoming a project manager or team leader

    • Seek opportunities for professional development and networking

    • Set specific goals and milestones to track progress

  • Answered by AI
  • Q2. What are you key strengths and weakness
  • Ans. 

    Key strengths include problem-solving skills and teamwork. Key weakness is lack of experience in certain areas.

    • Strength: Strong problem-solving skills demonstrated through successful completion of complex projects.

    • Strength: Excellent teamwork abilities shown through collaboration with colleagues on group assignments.

    • Weakness: Lack of experience in certain technical areas, such as coding languages or software programs.

    • W...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Aptitude test containing different questions regarding General aptitude and Mechanical Engineering.

Round 3 - Technical 

(2 Questions)

  • Q1. Different questions related to the IC Engine and Hydraulics.
  • Q2. What is the use of bearing and bush.
  • Ans. 

    Bearings and bushes are used to reduce friction and wear between two moving parts.

    • Bearings are used to support rotating shafts and reduce friction between the shaft and its housing.

    • Bushes are used to support stationary shafts and reduce friction between the shaft and its housing.

    • Bearings and bushes are commonly used in engines, pumps, and other machinery.

    • They help to increase the lifespan of the machinery by reducing w...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay positive and be confident. Always get full knowledge about your Internship and projects.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Explain your projects and internships.
  • Ans. 

    I have worked on various projects and internships during my studies.

    • Developed a mobile application for tracking fitness activities using React Native.

    • Assisted in designing and implementing a solar-powered irrigation system for a rural community.

    • Conducted research on the optimization of manufacturing processes in a pharmaceutical company.

    • Collaborated with a team to develop a prototype for a smart home automation system ...

  • Answered by AI
  • Q2. What do you know about L&t
  • Ans. 

    L&T is a multinational conglomerate company known for its expertise in engineering, construction, and manufacturing.

    • L&T stands for Larsen & Toubro.

    • It is headquartered in Mumbai, India.

    • L&T operates in various sectors including engineering, construction, manufacturing, technology, and financial services.

    • The company has a strong presence in infrastructure projects such as roads, bridges, airports, and power plants.

    • L&T is ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The recruitment process consists of written test and interview. A computer based test is conducted on your respective core subject, followed by a technical interview. A JAM session can also be conducted based on the interviewer. Be confident with the basics of your core subject. You can easily crack it.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is DNS? Explain its Usecase.
  • Ans. 

    DNS stands for Domain Name System. It translates domain names to IP addresses.

    • DNS is like a phone book for the internet, translating human-readable domain names (like google.com) to IP addresses (like 172.217.3.206).

    • It helps users access websites and other online services by resolving domain names to their corresponding IP addresses.

    • DNS also helps in load balancing, security, and email delivery by providing accurate an...

  • Answered by AI
  • Q2. Build a query using Rank() in SQL to fetch top 3 salaries from employee table.
  • Ans. 

    Using Rank() in SQL to fetch top 3 salaries from employee table.

    • Use Rank() function to assign a rank to each row based on salary.

    • Filter the results to only include rows with rank less than or equal to 3.

    • Order the results by salary in descending order to get the top salaries.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Ready to relocate and able to know domain knowledge can proceed.

Skills evaluated in this interview

Larsen & Toubro Limited Interview FAQs

How many rounds are there in Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview?
Larsen & Toubro Limited interview process usually has 2-3 rounds. The most common rounds in the Larsen & Toubro Limited interview process are Technical, Aptitude Test and Resume Shortlist.
How to prepare for Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Larsen & Toubro Limited. The most common topics and skills that interviewers at Larsen & Toubro Limited expect are AutoCAD, B.E, B.Tech, Data Analysis and Data Recovery.
What are the top questions asked in Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview -

  1. What happen when there is large air void in concret...read more
  2. what will you do if transit mixer getting delay in reaching site before the i.s...read more
  3. what is the procedure for form work removal on si...read more
How long is the Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview process?

The duration of Larsen & Toubro Limited Graduate Engineer Trainee (Get) interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Larsen & Toubro Limited Graduate Engineer Trainee (Get) Interview Process

based on 28 interviews

6 Interview rounds

  • Technical Round - 1
  • Technical Round - 2
  • Technical Round - 3
  • Aptitude Test Round
  • Personal Interview1 Round - 1
  • Personal Interview1 Round - 2
View more
Larsen & Toubro Limited Graduate Engineer Trainee (Get) Salary
based on 394 salaries
₹2 L/yr - ₹9 L/yr
64% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Larsen & Toubro Limited Graduate Engineer Trainee (Get) Reviews and Ratings

based on 82 reviews

2.8/5

Rating in categories

2.8

Skill development

1.9

Work-life balance

3.2

Salary

4.2

Job security

2.3

Company culture

2.6

Promotions

2.3

Work satisfaction

Explore 82 Reviews and Ratings
Assistant Manager
3.9k salaries
unlock blur

₹5.3 L/yr - ₹18.4 L/yr

Senior Engineer
3.5k salaries
unlock blur

₹4.5 L/yr - ₹12.5 L/yr

Engineer
1.3k salaries
unlock blur

₹1.6 L/yr - ₹9.5 L/yr

Manager
1.1k salaries
unlock blur

₹9 L/yr - ₹29 L/yr

Civil Engineer
1k salaries
unlock blur

₹2.2 L/yr - ₹11 L/yr

Explore more salaries
Compare Larsen & Toubro Limited with

Tata Projects

4.2
Compare

Megha Engineering & Infrastructures

3.9
Compare

Shapoorji Pallonji Group

4.1
Compare

Kalpataru Projects International

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview