Upload Button Icon Add office photos

Filter interviews by

Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Interview Questions, Process, and Tips

Updated 7 Feb 2024

Top Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Interview Questions and Answers

View all 16 questions

Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Interview Experiences

16 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

It consists of 25 questions within 25 mins

Round 2 - Group Discussion 

About some topics like technology on jobs

Round 3 - Technical 

(2 Questions)

  • Q1. What is the full form of CPM and PERT?
  • Q2. What are the intersted subjects

Interview Preparation Tips

Topics to prepare for Shapoorji Pallonji Group Graduate Engineer Trainee (Get) interview:
  • Mechanical Engineering
Interview preparation tips for other job seekers - plz be prepare the core topics
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

There 10 questions from aptitude

Round 3 - Technical 

(2 Questions)

  • Q1. The backgrounds of students is must ask question in interview process.technical questions was asked during interview mostly from thermodynamics
  • Q2. Laws of thermodynamics and the question about internship was asked

Interview Preparation Tips

Topics to prepare for Shapoorji Pallonji Group Graduate Engineer Trainee (Get) interview:
  • Thermodynamics
  • Powerplant
  • Refrigeration
Interview preparation tips for other job seekers - Be prepare on technical questions mainly from materials and tgermodynamics they do not asked deep from subject but very basic questions they asked

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Apr 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Normal aptitude and technical question like From SOM and FM.

Round 3 - Technical 

(1 Question)

  • Q1. Basic question from SOM, FM ,Thermo and production for Mechanical Branch student.

Interview Preparation Tips

Interview preparation tips for other job seekers - Here is limited scope for Mechanical branch.Not good for mechanical student
Round 1 - Aptitude Test 

Basic aptitude with technical questions at the end.

Round 2 - One-on-one 

(3 Questions)

  • Q1. Mostly related to my internship and final year project.
  • Q2. Tell me how you worked on your project.
  • Ans. 

    I worked on my project by following a structured approach and collaborating with team members.

    • I started by conducting thorough research to understand the project requirements.

    • I created a detailed project plan outlining the tasks, timelines, and resources needed.

    • I collaborated with team members to divide the work and assign responsibilities.

    • I regularly communicated with team members to ensure progress and address any ch...

  • Answered by AI
  • Q3. What did you learn from your internship time.
  • Ans. 

    During my internship, I learned valuable technical skills, gained practical experience, and developed professional relationships.

    • Learned how to apply theoretical knowledge to real-world projects

    • Developed proficiency in using industry-specific software and tools

    • Improved problem-solving and critical thinking abilities

    • Enhanced communication and teamwork skills through collaboration with colleagues

    • Gained insights into the ...

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. HR didn't ask me anything.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be true with what you know and what you really want.

Shapoorji Pallonji Group interview questions for designations

 Graduate Trainee

 (1)

 Graduate Engineer

 (1)

 Engineer Trainee

 (1)

 Electrical GET

 (1)

 Diploma Trainee Engineer

 (2)

 Management Engineer Trainee

 (1)

 Management Trainee

 (2)

 Electrical Engineer

 (6)

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via campus placement at Sardar Patel College of Engineering (SPCE), Mumbai and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. 1) Introduction 2) Family Background Project Design of slab Use of distribution steel What is development length Density of RCC Density of PCC
  • Q2. 1) Design of slab 2) Design of Beam
  • Ans. 

    Design of slab and beam involves calculating loads, selecting materials, and determining dimensions.

    • Calculate loads on the slab and beam

    • Select appropriate materials for the slab and beam

    • Determine the dimensions of the slab and beam

    • Consider factors such as span, deflection, and cracking

    • Ensure compliance with building codes and regulations

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was very easy and simple . Only basic question of engineering subject like Concrete technology , Design of steel structure.

Get interview-ready with Top Shapoorji Pallonji Group Interview Questions

Interview Questionnaire 

10 Questions

  • Q1. 1. Tell me about yourself?
  • Q2. 2.Why do you want to join us?
  • Q3. 3.What job role do you expect?
  • Q4. What is bleeding?
  • Ans. 

    Bleeding is the process of removing excess air from a hydraulic system.

    • Bleeding is necessary to ensure proper functioning of hydraulic systems.

    • It involves removing air bubbles from the system by opening valves or using a vacuum pump.

    • Bleeding is commonly done in brake systems to ensure proper braking performance.

    • It can also be done in cooling systems to prevent overheating.

    • Bleeding is important to prevent damage to the

  • Answered by AI
  • Q5. What is segregation?
  • Ans. 

    Segregation refers to the separation of different components or materials from a mixture.

    • Segregation can occur due to differences in size, density, or shape of the components.

    • Examples of segregation include the separation of oil and water in a mixture, or the separation of different sized particles in a granular material.

    • Segregation can have negative effects on the quality and consistency of a product, such as in the c...

  • Answered by AI
  • Q6. What is workability of concrete?
  • Ans. 

    Workability of concrete refers to its ease of mixing, placing, and compacting.

    • Workability is a crucial property of concrete that affects its strength, durability, and appearance.

    • It is influenced by factors such as water-cement ratio, aggregate size and shape, and admixtures.

    • Concrete with good workability can be easily placed and compacted without segregation or bleeding.

    • Various tests such as slump test, flow test, and ...

  • Answered by AI
  • Q7. What is W/c ratio? How can we improve concrete without changing w/c ratio? ( Ans: By adding admixture, superplaticizer)
  • Ans. 

    W/c ratio is the ratio of water to cement in concrete. Admixtures like superplasticizer can improve concrete without changing w/c ratio.

    • W/c ratio is a crucial factor in determining the strength and durability of concrete.

    • It is the ratio of the weight of water to the weight of cement used in the mix.

    • A lower w/c ratio means stronger and more durable concrete.

    • Admixtures like superplasticizer can improve workability, reduc...

  • Answered by AI
  • Q8. Questions based on Projects and Internship!
  • Q9. Do you want to relocate?
  • Q10. Higher studies?

Interview Preparation Tips

Interview preparation tips for other job seekers - It was great interaction with SPCL panel members! They were very patient and encouraging, dont get over tensed, they ask basics question from Concrete Technology, RCC, Soil, Transport.. so just prepare basics of all these subjects and i am sure you will crack it.. Wish you all the best.

I applied via Campus Placement and was interviewed before Oct 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Around 90 questions were there. 50 from Civil Engineering subjects and remainings were aptitude based.

Round 3 - Group Discussion 

There was a group discussion round after 1st round.

Round 4 - Technical 

(2 Questions)

  • Q1. This was the final round. Both HR and Technical interview round was conducted at a same time.
  • Q2. They ask me to choose any two subjects. From there they asked some conceptual questions. Also i was asked about my projects related questions. There was nothing much for HR round. Just had a normal convers...

Interview Preparation Tips

Interview preparation tips for other job seekers - Just go through keep your subject concepts clear. Interview was cool and interviewers were friendly enough.

I applied via campus placement at Amrita Institute of Technology & Science, Coimbatore and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

General questions on aptitude which are quite easy to solve. Technical questions are also there which are reasonably hard . Most questions from structural analysis and environmental engineering.

Round 2 - Technical 

(2 Questions)

  • Q1. What is meant by project management?
  • Ans. 

    Project management refers to the process of planning, organizing, and overseeing resources to achieve specific goals within a defined timeline.

    • It involves defining project goals and objectives

    • Creating a detailed project plan with timelines and milestones

    • Assigning tasks and responsibilities to team members

    • Monitoring progress and making adjustments as needed

    • Ensuring that the project is completed on time, within budget, a...

  • Answered by AI
  • Q2. What are the tests used for checking the bearing capacity of soil?
  • Ans. 

    Tests used for checking the bearing capacity of soil include plate load test, standard penetration test, and cone penetration test.

    • Plate load test: Measures the load-bearing capacity of soil by applying a load on a steel plate placed on the ground surface.

    • Standard penetration test: Determines the resistance of soil to penetration by a standard sampler driven by a standard hammer.

    • Cone penetration test: Measures the resi...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Shapoorji Pallonji Group Graduate Engineer Trainee (Get) interview:
  • Structural Analysis
  • Geotechnical
  • Environmental Engineering
  • Construction Management
Interview preparation tips for other job seekers - Be confident and show your interest in the company. Basic knowledge of civil engineering is enough to crack the interview. For the test in the 1st round, it's better to focus on technical questions.

I applied via Campus Placement and was interviewed in Jul 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

60 Questions - 30 aptitude, 30 civil engg

Round 2 - Technical 

(2 Questions)

  • Q1. Geotechnical engineering
  • Q2. Construction Management
Round 3 - HR 

(3 Questions)

  • Q1. What is your family background?
  • Q2. Why are you looking for a change?
  • Q3. Where do you see yourself in 5 years?

Interview Preparation Tips

Interview preparation tips for other job seekers - It is an easy interview. You need to be confident with your answers.

I was interviewed in Sep 2017.

Interview Questionnaire 

4 Questions

  • Q1. Why r u intrested in civil engg.
  • Ans. 

    I am interested in civil engineering because I enjoy designing and constructing structures that improve people's lives.

    • Passion for designing and constructing buildings and infrastructure

    • Desire to improve the quality of life for communities

    • Fascination with the combination of creativity and technical skills in civil engineering

    • Interest in sustainable and environmentally friendly construction practices

  • Answered by AI
  • Q2. Can u do job anywhere in india
  • Ans. 

    Yes, I am willing to work anywhere in India for the job.

    • I am open to relocating for the job opportunity.

    • I am flexible and adaptable to different work environments.

    • I am excited about the prospect of experiencing different cultures and regions in India.

    • I believe working in different locations will help me grow both personally and professionally.

  • Answered by AI
  • Q3. Tell something about summer project
  • Ans. 

    My summer project involved designing and implementing a new software system for tracking inventory in a manufacturing plant.

    • Researched current inventory management systems in the industry

    • Designed a user-friendly interface for inputting and accessing inventory data

    • Implemented the software using Java and MySQL

    • Tested the system for accuracy and efficiency

    • Presented the project findings to the management team

  • Answered by AI
  • Q4. Why shapoorji palonji not other companies.

Interview Preparation Tips

Round: Test
Tips: Its an online test ..
No -ve marking ....
Give ur best
Duration: 1 hour
Total Questions: 60

Round: Group Discussion
Experience: We were 8 members went for GD for 15 mins and then the examiner gives 2 or 3 of us the opportunity to conclude.
Tips: Stay calm . Its a normal GD
Duration: 15 minutes

Round: Technical + HR Interview
Experience: Tech. Round depends upon ur field of interest.
Tips: Prepare ur technical part well.

College Name: D.A.V.I.E.T

Shapoorji Pallonji Group Interview FAQs

How many rounds are there in Shapoorji Pallonji Group Graduate Engineer Trainee (Get) interview?
Shapoorji Pallonji Group interview process usually has 2-3 rounds. The most common rounds in the Shapoorji Pallonji Group interview process are Aptitude Test, Technical and Resume Shortlist.
What are the top questions asked in Shapoorji Pallonji Group Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Shapoorji Pallonji Group Graduate Engineer Trainee (Get) interview -

  1. What are the different types of concre...read more
  2. What is the slump value for pumpable concre...read more
  3. What are the tests carried out on aggregat...read more

Tell us how to improve this page.

Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Interview Process

based on 4 interviews

5 Interview rounds

  • Group Discussion Round
  • HR Round
  • Technical Round
  • Aptitude Test Round
  • Personal Interview1 Round
View more
Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Salary
based on 77 salaries
₹2.2 L/yr - ₹6 L/yr
5% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Reviews and Ratings

based on 30 reviews

2.9/5

Rating in categories

3.4

Skill development

2.8

Work-life balance

2.9

Salary

4.1

Job security

2.9

Company culture

3.1

Promotions

2.7

Work satisfaction

Explore 30 Reviews and Ratings
Deputy Manager
614 salaries
unlock blur

₹6 L/yr - ₹16.6 L/yr

Senior Engineer
428 salaries
unlock blur

₹4 L/yr - ₹12 L/yr

Construction Engineer
301 salaries
unlock blur

₹3 L/yr - ₹9 L/yr

Civil Site Engineer
228 salaries
unlock blur

₹1.5 L/yr - ₹9 L/yr

Civil Supervisor
223 salaries
unlock blur

₹1.5 L/yr - ₹5.6 L/yr

Explore more salaries
Compare Shapoorji Pallonji Group with

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

Adani Group

3.9
Compare

Mahindra & Mahindra

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview