Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by SHYAM METALICS AND ENERGY Team. If you also belong to the team, you can get access from here

SHYAM METALICS AND ENERGY Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

SHYAM METALICS AND ENERGY Engineer Trainee Interview Questions, Process, and Tips

Updated 19 Mar 2024

SHYAM METALICS AND ENERGY Engineer Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Aptitude test was held by an online platform.

Round 2 - Technical 

(7 Questions)

  • Q1. What is the second law of thermodynamics?
  • Ans. 

    The second law of thermodynamics states that the total entropy of an isolated system can never decrease over time.

    • Entropy in a closed system tends to increase over time

    • Heat energy naturally flows from hot to cold objects

    • Efficiency of energy conversion processes is limited by the second law of thermodynamics

  • Answered by AI
  • Q2. What is the difference between creep and fatigue?
  • Ans. 

    Creep is the slow, time-dependent deformation of a material under constant load, while fatigue is the weakening of a material due to repeated loading and unloading.

    • Creep is a time-dependent phenomenon, while fatigue is a cyclic phenomenon.

    • Creep occurs at high temperatures and constant stress, while fatigue occurs at lower temperatures and varying stress levels.

    • Creep leads to permanent deformation, while fatigue can lea...

  • Answered by AI
  • Q3. What is thermocouple?
  • Ans. 

    A thermocouple is a temperature sensor that consists of two different metals joined together at one end, which produces a voltage proportional to the temperature difference between the junction and the other end.

    • Consists of two different metals joined together at one end

    • Produces a voltage proportional to the temperature difference

    • Commonly used in industrial applications for temperature measurement

  • Answered by AI
  • Q4. What is t-t-t diagram?
  • Ans. 

    T-t-t diagram is a time-temperature-transformation diagram used in materials science to understand the transformation of phases in a material.

    • T-t-t diagram shows the relationship between time, temperature, and the transformation of phases in a material.

    • It helps in predicting the microstructure of a material based on the cooling rate and temperature.

    • T-t-t diagrams are commonly used in metallurgy to understand the phase

  • Answered by AI
  • Q5. What is annealing?
  • Ans. 

    Annealing is a heat treatment process used to soften metals and increase their ductility.

    • Annealing involves heating a metal to a specific temperature and then slowly cooling it to room temperature.

    • This process helps to relieve internal stresses, improve machinability, and enhance electrical conductivity.

    • Examples of metals that are commonly annealed include steel, copper, and aluminum.

  • Answered by AI
  • Q6. What is the critical temperature of steel?
  • Ans. 

    The critical temperature of steel is the temperature at which it loses its magnetic properties.

    • The critical temperature of steel is around 770°C (1420°F).

    • Above this temperature, steel becomes non-magnetic and undergoes a phase change.

    • The critical temperature varies depending on the type of steel and its composition.

  • Answered by AI
  • Q7. Types of steel?how we can differentiate them?
  • Ans. 

    Types of steel include carbon steel, alloy steel, stainless steel, and tool steel. They can be differentiated based on their composition, properties, and applications.

    • Carbon steel contains primarily carbon and iron, with low amounts of other elements. It is commonly used in construction and manufacturing.

    • Alloy steel contains additional elements such as manganese, silicon, and copper to enhance its properties. It is use...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for SHYAM METALICS AND ENERGY Engineer Trainee interview:
  • Strength of material
  • Material Science
  • Thermodynamics
Interview preparation tips for other job seekers - Be confident when you are giving the answer.

Skills evaluated in this interview

Interview questions from similar companies

I applied via Other and was interviewed before Jul 2017. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Why sharp corners are avoided in casting?
  • Ans. 

    Sharp corners are avoided in casting to prevent stress concentration and improve the overall strength and quality of the casting.

    • Sharp corners can lead to stress concentration, which can cause cracks or failure in the casting.

    • Rounded corners distribute stress more evenly, reducing the likelihood of defects.

    • Sharp corners can also create difficulties during the casting process, such as mold filling and solidification iss...

  • Answered by AI

Interview Preparation Tips

General Tips: It was held at Calcutta in year 1984.All the members were good and cooperative and I got selected too.But job freeze was immediately implemented and it took 1 year for final result. I received it on the day I was attending my 2 ND semester exam of M.Tech. and so preferred to join Itiltd which had posted me in Raebareli a nearer place to my locality turning out to be worst decision of my life.


Skills: Technical Questions, Technical Questions, Presentation Skills
Duration: 1-3 Months

I applied via Other and was interviewed before Jul 2017. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What type of dampings are there in case of vibration.
  • Ans. 

    There are several types of dampings in case of vibration, including viscous damping, hysteretic damping, and structural damping.

    • Viscous damping: It occurs when a fluid or viscous material is used to dissipate energy and reduce vibration.

    • Hysteretic damping: It is caused by the internal friction within a material, which converts mechanical energy into heat.

    • Structural damping: It is inherent in the structure itself and is...

  • Answered by AI

Interview Preparation Tips

General Tips: It was held in Delhi at Nehru palace in year 1985 after an all India written test.I was recruited in ITI Ltd a month before and so was relaxed not to prepare much for the interview. I told the interviewers that I just finished my 2 ND semester of M.Tech. at Itbhu.one member was from IIT Delhi and I could not answer viscous damping, inertial damping etc for his question on types of damping and I was rejected.Selection was made of my 2 years junior of graduation college who too had joined ITI Ltd in 1985.
Skills: Analytical Skills
Duration: >3 Months

Interview Questionnaire 

2 Questions

  • Q1. Mechanical engineering
  • Q2. Exprence

I applied via Naukri.com and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Related to quality management system.
  • Q2. Professional experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Before interview be prapared.

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 4 interview rounds.

Round 1 - Aptitude Test 

Study aptitude question from Arihant publication and practice reasoning and English.

Round 2 - Group Discussion 

They will give you any topic and you need to give your suggestions.

Round 3 - Technical 

(1 Question)

  • Q1. Question form core specialization.
Round 4 - HR 

(3 Questions)

  • Q1. What are your salary expectations?
  • Q2. Where do you see yourself in 5 years?
  • Q3. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Study and work hard.
At the end enjoy life and work for yourself.

Interview Questionnaire 

1 Question

  • Q1. Technical

I applied via Recruitment Consultant and was interviewed in Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Department related questions & some basic science questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Just keep your basis clear,have in-depth knowledge of your respective department & you will surely make it.

Engineer Interview Questions & Answers

NTPC user image Anonymous

posted on 14 Jan 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Related to power plant

I applied via Recruitment Consulltant and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. My name is shailesh Kumar and my father's name Devendra kumar

Interview Preparation Tips

Interview preparation tips for other job seekers - sir -my name is shailesh Kumar and my father's name Devendra kumar and my father is an a farmer and my mom is housewife and my qualifications 10+2 and POLYTECHYNIC diploma from electronic branch and i am from mainpuri

SHYAM METALICS AND ENERGY Interview FAQs

How many rounds are there in SHYAM METALICS AND ENERGY Engineer Trainee interview?
SHYAM METALICS AND ENERGY interview process usually has 2 rounds. The most common rounds in the SHYAM METALICS AND ENERGY interview process are Aptitude Test and Technical.
What are the top questions asked in SHYAM METALICS AND ENERGY Engineer Trainee interview?

Some of the top questions asked at the SHYAM METALICS AND ENERGY Engineer Trainee interview -

  1. What is the second law of thermodynami...read more
  2. What is the difference between creep and fatig...read more
  3. What is the critical temperature of ste...read more

Tell us how to improve this page.

SHYAM METALICS AND ENERGY Engineer Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
SHYAM METALICS AND ENERGY Engineer Trainee Salary
based on 5 salaries
₹1.4 L/yr - ₹3 L/yr
41% less than the average Engineer Trainee Salary in India
View more details

SHYAM METALICS AND ENERGY Engineer Trainee Reviews and Ratings

based on 2 reviews

4.1/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

4.1

Salary

5.0

Job security

4.1

Company culture

4.1

Promotions

4.1

Work satisfaction

Explore 2 Reviews and Ratings
Engineer
205 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
190 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
163 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
160 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
71 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SHYAM METALICS AND ENERGY with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview