Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by SHYAM METALICS AND ENERGY Team. If you also belong to the team, you can get access from here

SHYAM METALICS AND ENERGY Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

SHYAM METALICS AND ENERGY Electrical Technician Interview Questions, Process, and Tips

Updated 17 Jan 2025

SHYAM METALICS AND ENERGY Electrical Technician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Dec 2024. There were 5 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is the working principle of an overload relay?
  • Ans. 

    An overload relay works by monitoring the current flowing through a motor and tripping when the current exceeds a set limit.

    • Monitors the current flowing through a motor

    • Trips and interrupts power when current exceeds a set limit

    • Protects the motor from damage due to overloading

    • Can be reset manually after tripping

  • Answered by AI
  • Q2. How is insulation resistance measured?
  • Ans. 

    Insulation resistance is measured using a megohmmeter to apply a high voltage and measure the resistance of the insulation material.

    • Use a megohmmeter to apply a high voltage to the insulation material

    • Measure the resistance of the insulation material to determine its insulation resistance

    • Insulation resistance is typically measured in megaohms (MΩ)

    • Regular insulation resistance testing helps prevent electrical failures an

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. How to face Electrical safety
  • Ans. 

    Electrical safety can be ensured by following proper procedures, using appropriate equipment, and staying vigilant.

    • Always use insulated tools when working on live circuits

    • Ensure circuits are de-energized before working on them

    • Wear appropriate personal protective equipment (PPE) such as gloves and goggles

    • Regularly inspect and maintain electrical equipment to prevent malfunctions

    • Follow safety guidelines and procedures ou

  • Answered by AI
  • Q2. What is the process for performing preventive maintenance on a motor?
  • Ans. 

    Preventive maintenance on a motor involves inspecting, cleaning, lubricating, and testing the motor to ensure optimal performance and prevent breakdowns.

    • Inspect the motor for any signs of wear or damage

    • Clean the motor and its components to remove dirt and debris

    • Lubricate moving parts to reduce friction and wear

    • Test the motor's performance using appropriate tools and equipment

    • Replace any worn out parts or components as

  • Answered by AI
Round 3 - One-on-one 

(2 Questions)

  • Q1. What strategies can you use to succeed in an interview?
  • Ans. 

    To succeed in an interview, it is important to prepare thoroughly, practice common interview questions, research the company, dress professionally, and demonstrate enthusiasm and confidence.

    • Thoroughly research the company and the position you are applying for

    • Practice common interview questions and prepare examples of your skills and experiences

    • Dress professionally and appropriately for the interview

    • Demonstrate enthusia...

  • Answered by AI
  • Q2. What is the working principle of a star-delta starter?
  • Ans. 

    A star-delta starter is used to reduce the starting current of a motor by initially connecting the motor windings in a star configuration and then switching to a delta configuration.

    • The motor windings are initially connected in a star configuration during starting to reduce the starting current.

    • After a certain period, the windings are switched to a delta configuration to achieve full speed and torque.

    • This transition fr...

  • Answered by AI
Round 4 - Technical 

(2 Questions)

  • Q1. What are undervoltage faults?
  • Ans. 

    Undervoltage faults occur when the voltage in a system drops below the normal operating level, leading to potential equipment damage or malfunction.

    • Undervoltage faults can be caused by issues such as power supply fluctuations, equipment failures, or overloaded circuits.

    • These faults can lead to equipment damage, reduced efficiency, or complete shutdown of systems.

    • Examples include a power surge causing a drop in voltage,...

  • Answered by AI
  • Q2. What are overvoltage faults?
  • Ans. 

    Overvoltage faults are electrical faults that occur when the voltage in a circuit exceeds the normal operating range.

    • Overvoltage faults can damage electrical components and equipment.

    • They can be caused by lightning strikes, power surges, or faulty equipment.

    • Protective devices like surge protectors and voltage regulators can help prevent overvoltage faults.

    • Examples include a power surge from a lightning strike damaging ...

  • Answered by AI
Round 5 - Technical 

(2 Questions)

  • Q1. What is the purpose of a thermal relay?
  • Ans. 

    A thermal relay is used to protect electrical circuits from overloads by monitoring the temperature of the circuit and tripping when it exceeds a certain threshold.

    • Monitors the temperature of the electrical circuit

    • Trips and disconnects the circuit when temperature exceeds a set limit

    • Protects against overloads and overheating

    • Commonly used in motor protection applications

  • Answered by AI
  • Q2. What is an RDOL starter?
  • Ans. 

    An RDOL starter is a type of reduced voltage starter used in electrical systems to reduce the starting current and torque of a motor.

    • RDOL stands for Reduced Direct Online starter.

    • It is used to start induction motors in a controlled manner.

    • RDOL starters reduce the voltage supplied to the motor during starting to limit the inrush current.

    • This helps in reducing mechanical stress on the motor and connected equipment.

    • Common...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Possess good skills and demonstrate a strong work ethic in the workplace.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is capacity your furnace
  • Ans. 

    The capacity of a furnace refers to its heating output, typically measured in BTUs or tons.

    • Furnace capacity is determined by the amount of heat it can produce.

    • It is usually measured in BTUs (British Thermal Units) or tons.

    • Higher capacity furnaces can produce more heat and are suitable for larger spaces.

    • For example, a furnace with a capacity of 80,000 BTUs can heat a larger area compared to one with a capacity of 40,000

  • Answered by AI
  • Q2. What is drive components in CCM department
  • Ans. 

    Drive components in CCM department are the parts that enable the motor to function properly.

    • Drive components include motors, gears, belts, and pulleys.

    • They work together to transfer power from the motor to the machine.

    • The components must be properly sized and aligned to ensure efficient operation.

    • Examples of machines that use drive components include conveyor belts, pumps, and fans.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Steel Authority Of India Electrical Engineer interview:
  • Electrical Engineering
Interview preparation tips for other job seekers - Good working, hard working, honestly only fouce my dream
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Group Discussion 

Very polite and friendly

Round 2 - Technical 

(1 Question)

  • Q1. About moter, transformer,LT/HT brekers etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Thankyou hindalco
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Mar 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Current situation
  • Ans. 

    The current situation in the electrical engineering field is rapidly evolving with advancements in technology and increasing demand for sustainable energy solutions.

    • Advancements in renewable energy sources such as solar and wind power are shaping the future of electrical engineering.

    • The integration of smart grid technology and Internet of Things (IoT) in electrical systems is becoming more prevalent.

    • Electric vehicles a...

  • Answered by AI
  • Q2. Why we hire you
  • Ans. You can fill your own ans
  • Answered Anonymously
Round 3 - Technical 

(3 Questions)

  • Q1. About transformer, switch gear etc
  • Q2. Basic electrical
  • Q3. Control system related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Dont fear and nervous in the interview time.
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is step up transformer
  • Ans. 

    A step up transformer is a type of transformer that increases the voltage level from the input side to the output side.

    • Consists of more turns on the secondary coil than the primary coil

    • Used to increase voltage levels for long distance power transmission

    • Commonly found in power distribution systems and electrical grids

  • Answered by AI
  • Q2. What is distribution transformer
  • Ans. 

    A distribution transformer is a device used to step down high voltage electricity to a lower voltage suitable for use in homes and businesses.

    • Converts high voltage electricity from power lines to lower voltage for distribution

    • Commonly used in electrical distribution systems

    • Helps reduce voltage for safe use in homes and businesses

    • Can be mounted on poles or placed on the ground

    • Examples: pole-mounted distribution transfor

  • Answered by AI
  • Q3. What is the altenator
  • Ans. 

    An alternator is a device that converts mechanical energy into electrical energy in the form of alternating current.

    • An alternator is commonly used in vehicles to charge the battery and power the electrical system.

    • It consists of a rotor, stator, diode rectifier, and voltage regulator.

    • Alternators produce alternating current (AC) which is then converted to direct current (DC) for use in the vehicle.

    • They are more efficient...

  • Answered by AI
  • Q4. What is synonyms machine
  • Ans. 

    A synonyms machine is a tool or software that helps find alternative words with similar meanings for a given word.

    • A synonyms machine can be a thesaurus or a feature in word processing software.

    • It helps writers and speakers find the right word to convey their message effectively.

    • Examples include online thesauruses like Thesaurus.com or built-in thesaurus in Microsoft Word.

  • Answered by AI
  • Q5. What is hysteresis motor
  • Ans. 

    A hysteresis motor is a type of synchronous motor that operates based on the hysteresis effect in magnetic materials.

    • Hysteresis motors have a rotor made of a magnetic material with high hysteresis, such as cobalt steel.

    • They do not require a separate DC excitation like other synchronous motors.

    • Hysteresis motors are known for their smooth operation and low noise levels.

    • They are commonly used in applications where precise...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Jan 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Electrical and electronics engineering diploma
  • Q2. Yes
  • Q3. Diploma electrical and electronics engineering
  • Q4.  electrical work maintenance
Round 2 - Technical 

(2 Questions)

  • Q1. Maintenance work
  • Q2. Electrical electronics
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. How are home load of power plant received
  • Ans. 

    Home load of a power plant is received through a distribution network.

    • Home load is received from the power plant through a distribution network.

    • The power plant generates electricity and sends it to a substation.

    • The substation then distributes the electricity to homes through power lines.

    • The distribution network ensures that the electricity reaches each home efficiently.

    • Examples of distribution networks include overhead

  • Answered by AI
  • Q2. What is black out condition?
  • Ans. 

    A blackout condition refers to a complete loss of electrical power in a specific area or across a larger region.

    • Blackouts can be caused by various factors such as equipment failure, severe weather conditions, or intentional power cuts.

    • During a blackout, all electrical devices and systems dependent on electricity cease to function.

    • Blackouts can last for a few seconds, minutes, hours, or even days depending on the cause ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It best opportunity provide in the jobs and make it features on any person
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Basic Eletrical question
  • Q2. Electrical Machine and RTU panel
  • Q3. Solar system question

Interview Preparation Tips

Topics to prepare for Jindal Steel and Power Electrical Engineer interview:
  • Basic Electrical
Interview preparation tips for other job seekers - Experience in ABB RTU560 Erection and Commissioning, solar system,Substation automation maintenance. Etc
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Mathematics,reasoning,science

Round 2 - Technical 

(4 Questions)

  • Q1. Machine,network,electronics
  • Q2. Logic gates, binary code
  • Q3. What is working pricniple of induction motor?
  • Ans. 

    An induction motor works on the principle of electromagnetic induction to generate rotating magnetic fields.

    • Induction motor has a stator with a set of windings that are connected to an AC power source.

    • When AC current flows through the stator windings, it creates a rotating magnetic field.

    • This rotating magnetic field induces current in the rotor windings, causing the rotor to rotate.

    • The speed of the rotor rotation is sl...

  • Answered by AI
  • Q4. Symbol of all logic gates??
  • Ans. 

    The symbols of logic gates include AND gate (&), OR gate (|), NOT gate (!), XOR gate (^), NAND gate (|), NOR gate (&), and XNOR gate (=).

    • AND gate symbol: &

    • OR gate symbol: |

    • NOT gate symbol: !

    • XOR gate symbol: ^

    • NAND gate symbol: |

    • NOR gate symbol: &

    • XNOR gate symbol: =

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Jindal Steel and Power Electrical Engineer interview:
  • Work and time
  • Profit and loss
  • Direction,coding decoding
  • Logic gate
  • Trasistor
  • Binary code

I applied via Approached by Company and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Electrical technical
  • Q2. Motor maintance, pull card ,zss,all light connection etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical technician working jindal Steel and Power Dongamauha
Contribute & help others!
anonymous
You can choose to be anonymous

SHYAM METALICS AND ENERGY Interview FAQs

How many rounds are there in SHYAM METALICS AND ENERGY Electrical Technician interview?
SHYAM METALICS AND ENERGY interview process usually has 5 rounds. The most common rounds in the SHYAM METALICS AND ENERGY interview process are Technical, HR and One-on-one Round.
What are the top questions asked in SHYAM METALICS AND ENERGY Electrical Technician interview?

Some of the top questions asked at the SHYAM METALICS AND ENERGY Electrical Technician interview -

  1. What is the process for performing preventive maintenance on a mot...read more
  2. What is the working principle of an overload rel...read more
  3. What is the working principle of a star-delta start...read more

Recently Viewed

INTERVIEWS

Bridgei2i Analytics Solutions

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

Rockwell Automation

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

National Organic Chemical Industries

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

SHYAM METALICS AND ENERGY

No Interviews

INTERVIEWS

Texas Instruments

No Interviews

Tell us how to improve this page.

SHYAM METALICS AND ENERGY Electrical Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
SHYAM METALICS AND ENERGY Electrical Technician Salary
based on 7 salaries
₹2.2 L/yr - ₹3.7 L/yr
8% less than the average Electrical Technician Salary in India
View more details

SHYAM METALICS AND ENERGY Electrical Technician Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

5.0

Job security

5.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Engineer
205 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
190 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
163 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
160 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
71 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SHYAM METALICS AND ENERGY with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview