Add office photos
i
Aparna Constructions and Estates
Compare
Filter interviews by
Aparna Constructions and Estates Senior Site Engineer Interview Questions and Answers
Aparna Constructions and Estates Senior Site Engineer Interview Experiences
1 interview found
Selected
I applied via Walk-in and was interviewed in Feb 2024. There was 1 interview round.
(5 Questions)
- Q1. What is using this toilet room in waterproofing
- Ans.
Waterproofing in a toilet room is essential to prevent water damage and maintain structural integrity.
Waterproofing materials such as membranes, sealants, and coatings are used to protect surfaces from water penetration.
Proper installation of waterproofing systems is crucial to ensure long-term effectiveness.
Regular maintenance and inspections are necessary to identify and address any issues with waterproofing.
Examples...
- Q2. Why are out- let points through a core cutting work
- Q3. How much 1meter lenth how much kg
- Ans.
The weight of 1 meter length depends on the material being measured.
The weight of 1 meter length can vary depending on the material, such as steel, aluminum, wood, etc.
To calculate the weight, you need to know the density of the material.
For example, the weight of 1 meter length of steel would be different from 1 meter length of wood.
- Q4. 1m^3 how many bricks
- Ans.
The number of bricks in 1m^3 depends on the size of the bricks being used.
The number of bricks in 1m^3 will vary based on the size of the bricks.
Calculate the volume of a single brick and then divide 1m^3 by that volume to get the number of bricks.
For example, if a brick is 0.2m x 0.1m x 0.05m, its volume would be 0.001m^3. Therefore, 1m^3 would contain 1000 bricks.
- Q5. Why are applying for ventilation
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I applied via Walk-in and was interviewed in Apr 2024. There were 3 interview rounds.
Conduct the offline test
(8 Questions)
- Q1. Density of steel, cement, concrete, sand, aggregates.
- Ans.
Density of common construction materials
Steel: 7850 kg/m^3
Cement: 1440 kg/m^3
Concrete: 2400 kg/m^3
Sand: 1600-1700 kg/m^3
Aggregates: 1500-1750 kg/m^3
- Q2. How to find triangle concrete quantity.
- Ans.
Triangle concrete quantity can be found using the formula: 1/2 * base * height * thickness.
Calculate the area of the triangle using the formula: 1/2 * base * height.
Multiply the area by the thickness to get the concrete quantity.
For example, if the base of the triangle is 5 meters, height is 8 meters, and thickness is 0.2 meters, the concrete quantity would be: 1/2 * 5 * 8 * 0.2 = 4 cubic meters.
- Q3. How to find circular column concrete quantity.
- Ans.
Circular column concrete quantity can be found using the formula: Volume = πr^2h
Calculate the area of the circular column using the formula A = πr^2
Measure the height of the column
Multiply the area by the height to get the volume of concrete needed
Consider any additional factors such as wastage or reinforcement bars
- Q4. As a site engineer what is your roles and responsibilities.
- Q5. What is slump test why we do.
- Ans.
Slump test is a method to measure the consistency of concrete before it sets.
Slump test is used to determine the workability of fresh concrete.
It involves filling a cone-shaped mold with concrete, then lifting the mold to see how much the concrete slumps or settles.
The amount of slump indicates the consistency of the concrete - a higher slump means a more workable mix.
Slump test helps in ensuring that the concrete mix ...
- Q6. Compressive strength of concrete after 14 & 28 days and also persentage of strength.
- Ans.
Compressive strength of concrete is typically measured after 14 and 28 days to assess its strength development.
Compressive strength of concrete is usually measured in pounds per square inch (psi) or megapascals (MPa).
After 14 days, the average compressive strength of concrete is around 60-75% of its ultimate strength.
After 28 days, the concrete typically reaches about 90-95% of its ultimate strength.
The percentage of s...
- Q7. Mix ratios of concrete
- Ans.
Mix ratios of concrete refer to the proportions of cement, sand, and aggregate used in a concrete mix.
Mix ratios are typically expressed as a ratio of cement:sand:aggregate, such as 1:2:4.
The mix ratio will vary depending on the strength and durability requirements of the concrete.
Common mix ratios include 1:2:3 for low strength concrete and 1:1.5:3 for high strength concrete.
Water is also added to the mix to achieve t
- Q8. Building IS Codes
(2 Questions)
- Q1. Family background, Expected salary, present salary, Notice period.
- Q2. Why you choose shoba.
Interview Preparation Tips
Senior Site Engineer Interview Questions & Answers
VGN Projects Estates
Anonymous
posted on 16 Nov 2021
I applied via Naukri.com and was interviewed in Oct 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Building construction procedure..
- Ans.
Building construction procedure involves several stages from planning to completion.
Planning and design
Site preparation and foundation
Structural framework
Installation of utilities and systems
Interior and exterior finishing
Inspection and testing
Handover and maintenance
- Q2. Types of civil works?
- Ans.
Civil works include construction, maintenance, and repair of infrastructure such as roads, bridges, buildings, and water systems.
Road construction
Bridge construction
Building construction
Water system construction
Maintenance of roads, bridges, buildings, and water systems
Repair of roads, bridges, buildings, and water systems
Interview Preparation Tips
(2 Questions)
- Q1. Explain mivan slab cycle
- Ans.
Mivan slab cycle is a construction technique using aluminum formwork for casting slabs in a repetitive cycle.
Mivan slab cycle involves setting up aluminum formwork panels for casting slabs.
The cycle includes fixing reinforcement, pouring concrete, curing, and then dismantling the formwork for reuse.
This method is efficient, cost-effective, and results in high-quality finishes.
Mivan slab cycle reduces construction time ...
- Q2. What will you ensure before concreting
- Ans.
Before concreting, ensure proper formwork, reinforcement placement, concrete mix design, and weather conditions.
Check formwork for proper alignment and stability
Ensure reinforcement bars are correctly placed as per design
Verify concrete mix design meets project specifications
Monitor weather conditions to prevent issues like rain or extreme temperatures affecting the concrete
(1 Question)
- Q1. Expected salary if selected
- Ans.
My expected salary is based on my qualifications, experience, and the industry standards.
I am looking for a competitive salary that reflects my skills and experience in the civil engineering field.
I have researched the average salary range for Civil Site Engineers in this region and industry.
I am open to negotiation based on the overall compensation package offered by the company.
I am looking for a salary that aligns w...
Selected
I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Under and over reinf of beam and column
- Ans.
Under and over reinforcement in beams and columns refers to the amount of reinforcement provided in relation to the required strength of the structure.
Under reinforcement occurs when the amount of reinforcement provided is less than what is required for the structure to carry the design loads.
Over reinforcement occurs when the amount of reinforcement provided is more than what is required for the structure, leading to ...
- Q2. Ndt tests of members of why it’s been done
- Ans.
NDT tests of members are done to ensure structural integrity and safety.
NDT tests are non-destructive tests used to evaluate the properties of a material, component, or system without causing damage.
These tests help in detecting defects such as cracks, voids, and discontinuities that may compromise the structural integrity of the members.
By conducting NDT tests, engineers can ensure the safety and reliability of struct...
(2 Questions)
- Q1. Salary negotiations
- Q2. Previous employment
Interview Preparation Tips
Mohamed Adam
(1 Question)
- Q1. Abt work Experience?
Senior Civil Site Engineer Interview Questions & Answers
Rohan Builders
Anonymous
posted on 23 Dec 2022
I applied via Naukri.com and was interviewed in May 2023. There were 3 interview rounds.
(2 Questions)
- Q1. RCC work+bbm work test
- Q2. RCC work test cube molda+bbm work test line &level drawing megent room &other destance
(1 Question)
- Q1. Hirice building concrete work Grid m 30 &again
Interview Preparation Tips
(1 Question)
- Q1. Construction related questions
(1 Question)
- Q1. Salary discussion and other formalities
Interview Preparation Tips
I applied via Naukri.com and was interviewed before Feb 2021. There were 4 interview rounds.
Civil site related work objective test
(1 Question)
- Q1. Personal details with previous work related
(1 Question)
- Q1. All site works and building construction and process related questions
(1 Question)
- Q1. Final technical interview and salary discussion
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Sep 2023. There were 3 interview rounds.
(2 Questions)
- Q1. What is coloumn lap length
- Ans.
Column lap length is the length of overlap between two reinforcing bars in a column.
Column lap length is important for ensuring proper structural integrity in a column.
It is typically specified in construction drawings or codes.
The lap length is determined based on the diameter of the reinforcing bars and the structural requirements.
For example, a column may require a lap length of 40 times the diameter of the bar.
- Q2. What is 2d, 4d
- Ans.
2D and 4D refer to dimensions in geometry and physics.
2D refers to two-dimensional space, like a flat surface with length and width.
4D refers to four-dimensional space, which includes the three dimensions of space (length, width, height) and the dimension of time.
Examples of 2D objects include a square or a circle, while examples of 4D concepts include spacetime in physics.
Average problems, time, train, ven daiharms, simple intrest
Aparna Constructions and Estates Interview FAQs
Tell us how to improve this page.
Aparna Constructions and Estates Interviews By Designations
- Aparna Constructions and Estates Junior Engineer Civil Interview Questions
- Aparna Constructions and Estates Graduate Engineer Trainee (Get) Interview Questions
- Aparna Constructions and Estates Senior Civil Engineer Interview Questions
- Aparna Constructions and Estates Site Engineer Interview Questions
- Aparna Constructions and Estates Assistant Engineer Interview Questions
- Aparna Constructions and Estates Assistant Manager Interview Questions
- Aparna Constructions and Estates Civil Site Engineer Interview Questions
- Aparna Constructions and Estates Construction Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Site Engineer Interview Questions
- Civil Site Engineer Interview Questions
- Site Supervisor Interview Questions
- Electrical Site Engineer Interview Questions
- Site Incharge Interview Questions
- Site Engineer Mechanical Interview Questions
- Civil Site Supervisor Interview Questions
- Senior Civil Site Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Aparna Constructions and Estates Senior Site Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Assistant Engineer
188
salaries
|  ₹2 L/yr - ₹6.4 L/yr |
|
Junior Engineer
101
salaries
| ₹2 L/yr - ₹5 L/yr |
|
Senior Engineer
89
salaries
| ₹4.2 L/yr - ₹9 L/yr |
|
Engineer
85
salaries
| ₹3.8 L/yr - ₹7.5 L/yr |
|
Assistant Engineer - Civil
83
salaries
| ₹2.5 L/yr - ₹5.3 L/yr |
Prestige Group
Sobha
Godrej Properties
DLF
Calculate your in-hand salary
- Home >
- Interviews >
- Aparna Constructions and Estates Interview Questions >
- Aparna Constructions and Estates Senior Site Engineer Interview Questions
