Filter interviews by
I applied via Walk-in and was interviewed in Jul 2022. There were 3 interview rounds.
Shuttering quantity can be calculated by determining the surface area of the formwork and multiplying it by the depth of the concrete.
Measure the length and width of the formwork
Calculate the surface area by multiplying the length and width
Multiply the surface area by the depth of the concrete to get the shuttering quantity
Account for any additional formwork needed for corners or edges
Steel quantity can be calculated by using the formula: (D^2/162) x Length of steel
Determine the diameter of the steel
Calculate the length of the steel required
Use the formula (D^2/162) x Length of steel to calculate the steel quantity
Consider wastage and additional steel required for overlaps and joints
Initial setting time is the time taken by cement to harden to a certain degree.
Initial setting time is the time taken by cement to harden to a certain degree.
It is the time elapsed between the moment water is added to the cement and the time when the paste starts losing its plasticity.
The initial setting time of cement is generally around 30 minutes to 1 hour.
It is an important property of cement as it determines the t...
Lapping provides a smooth surface finish to the column.
Clean the column thoroughly before lapping.
Apply a lapping compound to the column surface.
Use a lapping tool to rotate and move up and down the column.
Continue lapping until the desired surface finish is achieved.
Clean the column again after lapping to remove any residue.
Density of RCC is around 2500 kg/m3 and PCC is around 2400 kg/m3.
RCC stands for Reinforced Cement Concrete and PCC stands for Plain Cement Concrete.
Density of RCC depends on the mix design and the type of aggregates used.
Density of PCC is lower than RCC due to absence of reinforcement.
Density of concrete is an important factor in determining its strength and durability.
OPC is Ordinary Portland Cement while PPC is Portland Pozzolana Cement.
OPC is made from raw materials like limestone and clay while PPC is made from a mixture of pozzolanic material and OPC.
PPC has higher durability and strength compared to OPC.
PPC is more eco-friendly as it uses industrial waste as a raw material.
OPC is commonly used for construction of buildings and bridges while PPC is used for marine structures, hy...
The density of sand, water, and aggregate varies depending on their composition and temperature.
The density of sand ranges from 1300 to 1700 kg/m³.
The density of water is 1000 kg/m³ at 4°C.
The density of aggregate varies depending on its size and composition.
The density of fine aggregate ranges from 1600 to 1800 kg/m³.
The density of coarse aggregate ranges from 1200 to 1500 kg/m³.
Clear cover provides protection and visibility.
Clear cover protects the item from dust, dirt, and damage.
Clear cover allows the item to be visible without removing the cover.
Clear cover is commonly used for electronic devices, books, and documents.
Construction building in raising panel installation involves proper planning, coordination, and adherence to safety regulations.
Ensure all necessary materials and equipment are available before starting the installation process
Coordinate with other trades to ensure smooth workflow and avoid conflicts
Follow safety regulations and guidelines to prevent accidents and injuries
Properly train and supervise workers to ensure ...
I applied via Naukri.com and was interviewed in Nov 2024. There were 9 interview rounds.
Good company a good job thank you
Beautiful company so much you are best job
What do you think about your experience with this mail your account will email you think about this and other
Some people may have some time with this and the regust and the e
Hello Kitty hawk the regust the best regards Michael Michael Kors handbags outlet for your interest don't you think about your
You think of you think about this mail your account will email the regust the best regards Michael sent via the Samsung galaxy S3 S4 cases and covers for timeline and the best way to
Sort results you think of it and the best regards David is the best in E flat in the best in tt and covers for timeline and w you are interested and the best in tt you are not filtered to the regust and the regust the iio the regust and covers the cost for this mail to the cost of i you are best
About your account will email it back to the best regards David sent to hear from them I would like a lot more work than I would love the the best way is fine with y in tt you think about what do you think of E main ST new and the regust the regust and I am
Good luck with your company and covers the regust to be able to hear that the uy you think E flat o the regust and I oooo the regust to o the cost for the best way is to hear that the uy W with W the regust EE Cummings et wowow the ene
I was interviewed in Nov 2024.
Nagarjuna Construction Company interview questions for popular designations
I applied via Referral and was interviewed in Oct 2024. There were 2 interview rounds.
RCC road construction involves using reinforced concrete for durability and strength.
RCC stands for Reinforced Cement Concrete
Specifications include using high-quality cement, aggregates, and steel reinforcement
Proper compaction and curing are essential for durability
Thickness of the RCC road depends on traffic load and subgrade conditions
Joint spacing should be as per design specifications
Building construction activities include excavation, foundation work, framing, roofing, electrical work, plumbing, and finishing.
Excavation: Digging the foundation and preparing the site
Foundation work: Pouring concrete and setting the foundation
Framing: Building the structure's skeleton with wood or steel beams
Roofing: Installing the roof materials
Electrical work: Wiring the building for electricity
Plumbing: Installin...
Get interview-ready with Top Nagarjuna Construction Company Interview Questions
I worked at XYZ Company as a Senior Engineer. My family background includes a mix of professionals and entrepreneurs.
Worked at XYZ Company as a Senior Engineer
Family background includes professionals and entrepreneurs
Basic math questions
Function overloading is having multiple functions with the same name but different parameters. Function overriding is redefining a base class function in a derived class.
Function overloading allows multiple functions with the same name but different parameters.
Function overriding involves redefining a base class function in a derived class with the same name and parameters.
Example of function overloading: void print(in...
I have 8 years of experience in civil engineering.
I have 4 years of experience working as a site engineer for a construction company.
I have 2 years of experience as a project engineer overseeing multiple construction projects.
I have 2 years of experience in project management and coordination with clients and stakeholders.
There are various types of civil engineering projects, including residential, commercial, infrastructure, and environmental projects.
Residential projects involve the construction of houses, apartments, and other residential buildings.
Commercial projects include the construction of office buildings, shopping centers, and hotels.
Infrastructure projects focus on the development of roads, bridges, airports, and other publi...
Designing and overseeing construction of a bridge in a remote area
Overseeing the entire design process from concept to completion
Coordinating with various stakeholders including government agencies and contractors
Addressing challenges such as limited access to resources and harsh weather conditions
Ensuring the bridge meets safety and regulatory standards
Seeing the positive impact the bridge had on the local community
I applied via Walk-in
I was interviewed in Jul 2024.
Yes may site supervisor
Civil work, piling work, fabrication, erection, mechanical
Mumbai ,Surat, Jharkhand and madhyapradesh
Some of the top questions asked at the Nagarjuna Construction Company interview -
The duration of Nagarjuna Construction Company interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 417 interviews
Interview experience
based on 3.7k reviews
Rating in categories
Hyderabad / Secunderabad
5-10 Yrs
Not Disclosed
Junior Engineer
901
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
629
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer Civil
490
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
296
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer - Civil
292
salaries
| ₹0 L/yr - ₹0 L/yr |
Larsen & Toubro Limited
TCS
BHEL
Infosys