Bechtel Civil Designer Interview Questions and Answers

Q1. Have you maintained standard quality in your previous company?
Add your answer
Q2. Do you use drawing and technology in your work?
Add your answer
Q3. Are you doing to maintain time in your life
Add your answer

Calculator for material quantity on site material

Q1. How do you calculate the quantity of a specific item or material?
Add your answer
Q2. What methods do you use to verify information?
Add your answer

Q1. Bolt to botlt distance how much
Ans. 
The bolt to bolt distance depends on the specific design requirements and standards for the structural connection.
• The bolt to bolt distance is typically specified in the design drawings or calculations provided by the engineer.

• It is important to follow the recommended bolt to bolt distance to ensure the structural integrity of the connection.

• The bolt to bolt distance may vary depending on factors such as the size and t...read more
Answered by AI
View 1 more answer
Q2. Edge distance how much ?
Ans. 
Edge distance refers to the distance between the edge of a structural member and the center of a hole or fastener.
• Edge distance is typically specified in design codes and standards.

• It is important to maintain adequate edge distance to prevent failure of the connection.

• The required edge distance can vary depending on the type of connection and the loading conditions.

• For example, in steel connections, the minimum edge di...read more
Answered by AI
View 1 more answer
Q3. Column to base plate which type of weld ?
Ans. 
The type of weld used for connecting a column to a base plate is typically a fillet weld.
• Fillet welds are commonly used for connecting structural steel components.

• The size of the fillet weld is determined based on the forces and stresses the connection will experience.

• Proper welding procedures and inspections are essential to ensure the weld's quality and strength.
Answered by AI
View 1 more answer
Q4. Column to beam how to joint ?
Ans. 
Column to beam joints are typically connected using various methods such as welding, bolting, or using mechanical connectors.
• Common methods for connecting column to beam include welding, bolting, or using mechanical connectors

• Welding is a common method where the column and beam are fused together using heat

• Bolting involves using bolts to secure the column and beam together

• Mechanical connectors such as shear connectors ...read more
Answered by AI
View 2 more answers
Q5. Top moment column to beam top side which weld ?
Ans. 
The top moment column to beam top side is typically welded on the compression side of the beam.
• Weld the top moment connection on the compression side of the beam for maximum strength.

• Ensure proper welding techniques and inspections are followed to maintain structural integrity.

• Consider using fillet welds or groove welds depending on the design requirements.

• Consult structural engineering codes and standards for specific...read more
Answered by AI
View 1 more answer
Q6. Edge distance to cover vertical reinforcement 75 mm all type of fdn
Ans. 
Edge distance of 75mm is required to cover vertical reinforcement in all types of foundations.
• Edge distance is important to ensure proper anchorage and structural integrity of the reinforcement.

• In this case, a minimum edge distance of 75mm is specified for covering vertical reinforcement in all types of foundations.

• Examples of foundations where this requirement applies include spread footings, pile caps, and mat founda
Answered by AI
View 1 more answer

Q1. Explain Hydraulic
Ans. 
Hydraulic refers to the study of fluids in motion and the engineering applications of fluid mechanics.
• Hydraulic engineering involves the design and construction of structures that control the flow and pressure of liquids, such as dams, canals, and pipelines.

• Hydraulic systems use fluid pressure to generate, control, and transmit power, commonly found in machinery like hydraulic lifts and brakes.

• Hydraulic principles are ...read more
Answered by AI
Add your answer

Q1. Sfd and bmd questions
Add your answer
Q2. Calculation of earthquake loads
Ans. 
Earthquake loads are calculated using seismic design codes and formulas based on the seismic hazard of the region.
• Determine the seismic hazard of the region using historical data and seismic maps

• Select a seismic design code such as ASCE 7 or Eurocode 8

• Calculate the seismic base shear using the formula V = CsW

• Distribute the seismic base shear to the structure using the appropriate load combinations

• Consider the effects o...read more
Answered by AI
Add your answer

Q1. Only Tool test on E3D
Add your answer
Q2. Modeling related questions
Add your answer

Q1. Procedure of laying tile and granite
Ans. 
The procedure of laying tile and granite involves preparing the surface, applying adhesive, laying the tiles/granite, grouting, and sealing.
• Prepare the surface by ensuring it is clean, level, and dry.

• Apply adhesive to the surface using a trowel, ensuring even coverage.

• Lay the tiles/granite starting from the center and working outwards in a pattern.

• Grout the tiles/granite by filling the gaps between them with grout and ...read more
Answered by AI
Add your answer

It is very difficult test to pass

Q1. Technical interview of concrete
Add your answer

Q1. What is hydration process during casting of concrete?
Ans. 
Hydration process is the chemical reaction between cement and water which results in the hardening of concrete.
• Hydration process starts as soon as water is added to cement.

• The reaction produces heat and causes the mixture to harden and gain strength.

• The process continues for weeks and even months, resulting in a stronger and more durable concrete.

• The amount of water used in the mixture affects the hydration process and...read more
Answered by AI
Add your answer
Q2. Concrete strength depend ?
Ans. 
Concrete strength depends on various factors.
• Water-cement ratio

• Type and quality of cement

• Aggregate size and shape

• Curing conditions

• Mix design

• Age of concrete

• Temperature and humidity

• Presence of admixtures
Answered by AI
Add your answer
Q3. Why used send in concrete mixer
Ans. 
Water is added to concrete mixer to make the mixture more workable and to achieve the desired consistency.
• Water is added to hydrate the cement and activate the chemical reaction that causes it to harden

• The amount of water added affects the strength and durability of the concrete

• Too much water can weaken the concrete and cause cracking

• The water should be added gradually and mixed thoroughly to ensure even distribution

• Ot...read more
Answered by AI
Add your answer