i
Afcons Infrastructure
Filter interviews by
I applied via Approached by Company and was interviewed in Jun 2022. There were 2 interview rounds.
There are multiple methods used to forecast population.
Demographic analysis
Cohort-component method
Time series analysis
Mathematical models
Survival analysis
Migration analysis
ESR capacity can be calculated by measuring the equivalent series resistance (ESR) of a component or circuit.
ESR capacity is determined by measuring the ESR of the component or circuit.
ESR is the resistance that exists in series with the ideal capacitance of a component.
To calculate ESR capacity, use an ESR meter or measure the voltage drop across a known current.
ESR capacity is important in determining the performance...
Peak factors are used in distribution design to account for peak loads and ensure safe and efficient operation.
Peak factors are used to determine the maximum load that a distribution system can handle.
They take into consideration factors such as diversity of loads, power factor, and future growth.
For example, a peak factor of 1.5 means that the system should be designed to handle 50% more than the average load.
Peak fac...
The minimum residual pressure in SVS refers to the lowest pressure that remains in the system after it has been depressurized.
The minimum residual pressure is important to ensure the system is properly depressurized and safe for maintenance or repair.
It is typically measured in units of pressure, such as psi or bar.
The specific value of the minimum residual pressure can vary depending on the design and requirements of ...
Components in a water supply scheme include pipes, pumps, valves, storage tanks, and treatment facilities.
Pipes: Used to transport water from the source to the distribution network.
Pumps: Provide the necessary pressure to move water through the system.
Valves: Control the flow and direction of water within the scheme.
Storage tanks: Store water for peak demand periods or emergencies.
Treatment facilities: Purify and disin
The design period for distribution system and headwork refers to the expected lifespan or duration for which the system is designed to function effectively.
The design period is determined based on factors such as expected growth, technological advancements, and maintenance requirements.
It is important to consider the long-term needs and goals of the distribution system and headwork when determining the design period.
Fo...
The design period for pumping machinery and ESR refers to the intended lifespan or duration of operation for the equipment.
The design period is typically determined based on factors such as expected usage, maintenance requirements, and technological advancements.
It is important to consider the design period when selecting materials, components, and manufacturing processes to ensure durability and reliability.
For exampl...
I was interviewed in Jan 2025.
SPI, CPI, cost variance, and schedule variance are key performance indicators used in project management to measure project performance.
SPI (Schedule Performance Index) measures the efficiency of schedule performance. SPI = EV / PV. A value greater than 1 indicates ahead of schedule, less than 1 behind schedule.
CPI (Cost Performance Index) measures the efficiency of cost performance. CPI = EV / AC. A value greater than...
I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.
Currently working on implementing a new data analytics platform to improve reporting efficiency.
Identifying key requirements for the new platform
Developing a project plan with timelines and milestones
Collaborating with IT team to ensure smooth implementation
Testing and refining the platform before full deployment
Experienced MIS Manager with a background in data analysis and system optimization.
Over 5 years of experience in managing MIS systems
Skilled in data analysis and reporting tools such as SQL, Excel, and Tableau
Implemented process improvements resulting in 20% increase in efficiency
Led a team of analysts to successfully implement a new CRM system
I changed organizations quickly to pursue new opportunities for growth and development.
Opportunity for career advancement
Desire for new challenges
Better work-life balance
Company restructuring or downsizing
Relocation to a new city
Yes, I am willing to work in a remote location as long as the necessary resources are provided.
I am comfortable with remote work and have experience managing teams remotely.
I have a dedicated home office setup with reliable internet connection.
I am open to occasional travel for meetings or training sessions.
I am familiar with using collaboration tools like Slack, Zoom, and Trello for remote work.
I understand the import...
Afcons Infrastructure interview questions for popular designations
I applied via Approached by Company and was interviewed in Nov 2024. There was 1 interview round.
Get interview-ready with Top Afcons Infrastructure Interview Questions
Planning is the process of setting goals, determining actions to achieve those goals, and allocating resources to accomplish the goals.
Setting goals and objectives
Identifying actions and tasks needed to achieve the goals
Allocating resources such as time, money, and manpower
Creating schedules and timelines
Monitoring progress and making adjustments as needed
During my internship, I assisted in creating project schedules, tracking progress, and analyzing delays.
Assisted in creating project schedules using software like Primavera P6
Tracked progress by updating Gantt charts and critical path analysis
Analyzed delays by identifying causes and proposing mitigation strategies
I was interviewed in Aug 2024.
Tyre size refers to the dimensions of a tire, including width, aspect ratio, and diameter.
Tyre size is typically expressed as a series of numbers and letters on the sidewall of the tire.
The first number represents the width of the tire in millimeters.
The second number is the aspect ratio, which is the height of the tire's cross-section as a percentage of the width.
The final number is the diameter of the wheel that the ...
Pan mixer is a stationary mixer with a single shaft while twin shaft mixer has two horizontal shafts rotating in opposite directions.
Pan mixer has a single shaft while twin shaft mixer has two horizontal shafts
Twin shaft mixer provides better mixing efficiency and homogeneity compared to pan mixer
Pan mixer is suitable for smaller batches while twin shaft mixer is used for larger production volumes
I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.
Maintain regular communication and interaction with all staff members.
Regularly check in with staff to ensure they have the resources and support they need
Hold regular team meetings to discuss project progress and address any concerns
Encourage open communication and feedback from all team members
Provide opportunities for team building and collaboration
Lead by example by being accessible and approachable to all staff me
I was interviewed in May 2024.
Top trending discussions
The duration of Afcons Infrastructure interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 206 interviews
Interview experience
based on 2.5k reviews
Rating in categories
Senior Engineer
486
salaries
| ₹0 L/yr - ₹0 L/yr |
Planning Engineer
196
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Engineer
187
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive Engineer
172
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
153
salaries
| ₹0 L/yr - ₹0 L/yr |
Larsen & Toubro Limited
Tata Projects
Shapoorji Pallonji Group
GAMMON INDIA