i
Afcons Infrastructure
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.
Risk is the likelihood of a harmful event happening, hazard is a potential source of harm, and a near miss is a close call that could have resulted in harm.
Risk is the chance of a harmful event occurring, such as an accident or injury
Hazard is a potential source of harm, such as a slippery floor or faulty equipment
Near miss is a close call where an incident almost occurred but was avoided
Identifying and addressing risk...
Different types of fire extinguishers include water, foam, CO2, dry powder, and wet chemical, each designed for specific types of fires.
Water extinguishers are suitable for Class A fires involving solid materials like wood or paper.
Foam extinguishers are effective on Class A and B fires, which involve flammable liquids like petrol or oil.
CO2 extinguishers are used for electrical fires (Class C) and flammable liquids (C...
The number of fall arrestors required depends on the specific work environment and tasks being performed.
Number of fall arrestors needed is determined by the number of workers at height simultaneously
Consider the length of the fall arrestor lanyard and the distance to the nearest anchor point
Ensure that each worker has their own fall arrestor for individual protection
I applied via Recruitment Consultant and was interviewed in Mar 2021. There was 1 interview round.
Fire is a chemical reaction that releases heat, light, and various gases.
Fire is a rapid oxidation process that occurs when fuel (such as wood, paper, or gasoline) combines with oxygen and heat.
It produces flames, smoke, and heat that can be dangerous to people and property.
Fire can be caused by various sources, including electrical faults, cooking accidents, and arson.
Preventing fires and knowing how to respond to the...
Safety refers to the condition of being protected from harm, injury, or danger.
Safety involves identifying and assessing potential hazards
Implementing measures to control or eliminate those hazards
Training employees on safe work practices
Regularly reviewing and updating safety policies and procedures
Examples of safety measures include wearing personal protective equipment, using safety equipment, and following establis
A hazard is anything that has the potential to cause harm or injury to people, property, or the environment.
Hazard can be physical, chemical, biological, or environmental
Examples of hazards include fire, toxic chemicals, infectious diseases, and natural disasters
Hazards can be identified through risk assessments and safety inspections
Preventative measures can be taken to mitigate or eliminate hazards
Scaffolding is a temporary structure used to support workers and materials during construction or maintenance of buildings or other structures.
Scaffolding is typically made of metal or wood and consists of platforms, braces, and supports.
It is used to provide a safe working platform for workers at heights.
Scaffolding must be erected and dismantled by trained professionals to ensure safety.
Examples of scaffolding includ...
I applied via Naukri.com and was interviewed in Dec 2017. There were 4 interview rounds.
Experienced safety officer with a background in industrial safety protocols and emergency response procedures.
Over 5 years of experience in implementing safety measures in industrial settings
Proficient in conducting safety audits and inspections to ensure compliance with regulations
Skilled in developing and implementing safety training programs for employees
Strong knowledge of emergency response protocols and procedure...
Safety Officers are responsible for ensuring the safety of employees in the workplace by implementing safety protocols and procedures.
Develop and implement safety policies and procedures
Conduct regular safety inspections and audits
Investigate accidents and incidents to determine root causes
Provide safety training to employees
Ensure compliance with safety regulations and standards
Maintain safety records and reports
posted on 2 Nov 2021
I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.
Height work safety involves implementing control measures to prevent falls and injuries.
Conducting a risk assessment before starting any work at height
Providing appropriate training and equipment for workers
Implementing a fall protection plan
Regularly inspecting equipment and ensuring it is in good condition
Establishing clear communication and emergency procedures
Examples of control measures include guardrails, safety ...
posted on 2 Nov 2021
I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.
I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.
The CO gas limit is the maximum allowable concentration of carbon monoxide in the air.
The CO gas limit is set by regulatory agencies to protect human health and safety.
The limit varies depending on the location and type of facility.
For example, the Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit (PEL) of 50 parts per million (ppm) for an 8-hour workday.
In residential homes, the...
posted on 20 Sep 2023
I manage safety at site by conducting regular safety inspections, implementing safety protocols, providing safety training, and enforcing safety regulations.
Conduct regular safety inspections to identify potential hazards
Implement safety protocols to address identified hazards
Provide safety training to employees on proper safety procedures
Enforce safety regulations to ensure compliance
posted on 18 Nov 2023
Safety Officer is responsible for ensuring the safety of employees, implementing safety protocols, conducting safety inspections, and promoting a culture of safety in the workplace.
Implementing safety protocols and procedures
Conducting safety inspections and audits
Training employees on safety practices
Investigating accidents and incidents
Ensuring compliance with safety regulations
Promoting a culture of safety in the wo
posted on 19 Oct 2023
Safety equipment refers to protective gear and devices used on a site to prevent accidents and injuries.
Safety equipment includes items such as hard hats, safety goggles, gloves, and safety harnesses.
These items are used to protect workers from hazards like falling objects, chemical splashes, and electrical shocks.
Other examples of safety equipment are earplugs, respirators, safety shoes, and high-visibility clothing.
S...
Nature work on site refers to the natural elements and environmental factors that affect the safety of workers and the site.
Includes weather conditions such as rain, wind, and extreme temperatures
Environmental hazards such as wildlife, poisonous plants, and natural disasters
Terrain and landscape features such as steep slopes, bodies of water, and rocky terrain
May also include the impact of nearby construction or develo...
Confined space is an area with limited entry and exit points, not designed for continuous occupancy.
Examples include tanks, silos, sewers, and tunnels.
Hazards in confined spaces include lack of oxygen, toxic gases, and fire/explosion risks.
Proper training and equipment are necessary for safe entry and work in confined spaces.
Hot work refers to any activity that involves open flames, sparks, or heat sources that could potentially ignite flammable materials.
Examples of hot work include welding, cutting, brazing, soldering, and grinding.
Hot work must be performed in a designated area that has been cleared of flammable materials.
Before hot work begins, a permit must be obtained and a fire watch must be present to monitor the area for any signs...
A cold worker is a person who works with metal without using heat.
Cold workers use techniques like cutting, bending, and shaping metal without heating it up.
Examples of cold working include hammering, rolling, and drawing metal.
Cold working is often used to create intricate designs or shapes in metal.
Cold workers must be skilled in using tools like hammers, pliers, and saws to manipulate metal.
Cold working is often use...
A work permit is a document that authorizes a person to perform a specific job or task in a designated area.
Work permits are used to ensure that work is carried out safely and in compliance with regulations.
They are typically issued by a supervisor or manager and must be obtained before work can begin.
Examples of work permits include hot work permits, confined space entry permits, and excavation permits.
The permit will...
based on 3 interviews
Interview experience
based on 16 reviews
Rating in categories
Senior Engineer
486
salaries
| ₹0 L/yr - ₹0 L/yr |
Planning Engineer
196
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Engineer
187
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive Engineer
172
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
153
salaries
| ₹0 L/yr - ₹0 L/yr |
Larsen & Toubro Limited
Tata Projects
Shapoorji Pallonji Group
GAMMON INDIA