i
Tata Projects
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Clear (1)
I applied via Recruitment Consulltant and was interviewed in Apr 2024. There were 7 interview rounds.
Our aim zero accident
Increase culture of safety
Made work permit box
Devloped safety culture
Developing a safety culture on site involves leadership commitment, employee involvement, training, communication, and continuous improvement.
Leadership commitment to safety is crucial in setting the tone for the entire organization.
Encourage employee involvement in safety programs and decision-making processes.
Provide regular safety training to ensure employees are aware of potential hazards and how to mitigate them.
E...
Ensure safety at project mobilization by conducting thorough risk assessments, providing proper training, enforcing safety protocols, and maintaining clear communication.
Conduct comprehensive risk assessments before mobilization to identify potential hazards
Provide necessary safety training to all personnel involved in the project
Enforce strict adherence to safety protocols and regulations on-site
Maintain clear communi...
To ensure safety in confined spaces, proper training, equipment, communication, and monitoring are essential.
Provide thorough training on confined space entry procedures and hazards
Ensure workers have appropriate personal protective equipment (PPE)
Implement a permit system for entry into confined spaces
Maintain constant communication with workers inside the confined space
Regularly monitor air quality and other hazards ...
The maximum AC voltage allowed in a confined space is typically 50 volts, while the maximum DC voltage allowed is usually 120 volts.
Maximum AC voltage allowed in confined space is usually 50 volts
Maximum DC voltage allowed in confined space is typically 120 volts
Moderator of safety culture
I was interviewed in Jul 2024.
Safety is the state of being protected from harm, danger, or injury.
Safety involves identifying and mitigating potential hazards in the workplace or environment
It includes following safety protocols and procedures to prevent accidents
Safety also involves promoting a culture of awareness and responsibility among individuals
Examples: wearing personal protective equipment, conducting safety inspections, providing safety t
Risk is the potential for harm or loss resulting from exposure to hazards.
Risk is the likelihood of a negative event occurring.
It involves assessing the probability and severity of potential harm.
Examples include workplace accidents, natural disasters, and financial losses.
Risk can be managed through mitigation strategies and safety measures.
A hazard is a potential source of harm or danger that could cause injury, damage, or loss.
Hazard is anything that has the potential to cause harm.
Hazards can be physical, chemical, biological, ergonomic, or psychosocial.
Examples of hazards include slippery floors, toxic chemicals, infectious diseases, poor ergonomics, and workplace stress.
Identifying and controlling hazards is essential for maintaining a safe work envi
Safety is the practice of preventing accidents, injuries, and other potential harm in the workplace or any environment.
Safety involves identifying and mitigating risks to prevent harm to individuals or property.
It includes following safety protocols, using protective equipment, and maintaining a safe work environment.
Examples of safety measures include wearing a helmet on a construction site, using seat belts while dri...
Risk is the potential for harm or loss resulting from exposure to hazards.
Risk is the likelihood of a negative event occurring.
It involves assessing the probability and severity of potential harm.
Risk can be managed through mitigation strategies.
Examples include workplace accidents, natural disasters, and financial losses.
Tata Projects interview questions for designations
Safety equipment refers to protective gear and devices used on a site to prevent accidents and injuries.
Safety equipment includes items such as hard hats, safety goggles, gloves, and safety harnesses.
These items are used to protect workers from hazards like falling objects, chemical splashes, and electrical shocks.
Other examples of safety equipment are earplugs, respirators, safety shoes, and high-visibility clothing.
S...
Nature work on site refers to the natural elements and environmental factors that affect the safety of workers and the site.
Includes weather conditions such as rain, wind, and extreme temperatures
Environmental hazards such as wildlife, poisonous plants, and natural disasters
Terrain and landscape features such as steep slopes, bodies of water, and rocky terrain
May also include the impact of nearby construction or develo...
Confined space is an area with limited entry and exit points, not designed for continuous occupancy.
Examples include tanks, silos, sewers, and tunnels.
Hazards in confined spaces include lack of oxygen, toxic gases, and fire/explosion risks.
Proper training and equipment are necessary for safe entry and work in confined spaces.
Hot work refers to any activity that involves open flames, sparks, or heat sources that could potentially ignite flammable materials.
Examples of hot work include welding, cutting, brazing, soldering, and grinding.
Hot work must be performed in a designated area that has been cleared of flammable materials.
Before hot work begins, a permit must be obtained and a fire watch must be present to monitor the area for any signs...
A cold worker is a person who works with metal without using heat.
Cold workers use techniques like cutting, bending, and shaping metal without heating it up.
Examples of cold working include hammering, rolling, and drawing metal.
Cold working is often used to create intricate designs or shapes in metal.
Cold workers must be skilled in using tools like hammers, pliers, and saws to manipulate metal.
Cold working is often use...
A work permit is a document that authorizes a person to perform a specific job or task in a designated area.
Work permits are used to ensure that work is carried out safely and in compliance with regulations.
They are typically issued by a supervisor or manager and must be obtained before work can begin.
Examples of work permits include hot work permits, confined space entry permits, and excavation permits.
The permit will...
Get interview-ready with Top Tata Projects Interview Questions
A responsible safety officer on site ensures the implementation and enforcement of safety protocols to prevent accidents and promote a safe working environment.
Implementing and enforcing safety policies and procedures
Conducting regular safety inspections and audits
Identifying and assessing potential hazards
Providing safety training and education to employees
Investigating accidents and incidents
Maintaining safety record...
Risk assessment is the process of identifying potential hazards and evaluating the likelihood and severity of harm that could result.
Identify potential hazards
Evaluate likelihood and severity of harm
Determine risk level
Implement measures to control or mitigate risks
Regularly review and update risk assessments
Examples: workplace risk assessments, environmental risk assessments
Lockout and tagout is a safety procedure used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or repair work.
Lockout involves physically disconnecting the power source of a machine or equipment, while tagout involves placing a warning tag on the power source to indicate that it should not be turned on.
Th...
Hazard analysis is the process of identifying potential hazards and evaluating their risks to prevent accidents or injuries.
Identify potential hazards in the workplace or environment
Evaluate the risks associated with each hazard
Develop strategies to prevent accidents or injuries
Implement controls to mitigate the risks
Regularly review and update hazard analysis
Examples: Job Hazard Analysis (JHA), Hazard and Operability ...
Confined space hazard refers to the potential dangers associated with working in enclosed or partially enclosed spaces.
Confined spaces can be found in a variety of workplaces, including tanks, vessels, silos, sewers, and tunnels.
Hazards in confined spaces can include lack of oxygen, toxic gases, flammable substances, and physical hazards such as entrapment or engulfment.
Proper training, equipment, and procedures are ne...
Hot work refers to any activity that involves open flames, sparks, or heat sources that could potentially ignite flammable materials.
Examples of hot work include welding, cutting, brazing, soldering, and grinding.
Hot work must be performed in a designated area that has been cleared of flammable materials.
Before hot work begins, a permit must be obtained and a fire watch must be established.
Proper personal protective eq...
Cold work refers to any metalworking process that is performed at room temperature or below.
Examples of cold work include bending, punching, and shearing metal.
Cold work can cause strain hardening, which can make the metal more difficult to work with in the future.
Cold work can also cause surface defects, such as cracks or scratches.
Cold work is often used to shape metal into specific forms or sizes.
Cold work is typica...
Grinder coupler is used to connect the grinder to the power source.
Ensure the coupler is compatible with the grinder and power source
Inspect the coupler for any damage before use
Securely attach the coupler to the grinder and power source
Follow proper lockout/tagout procedures when connecting or disconnecting the coupler
Examples: Using a coupler to connect a grinder to a generator on a construction site
Using a coupler t...
I applied via Approached by Company and was interviewed in Aug 2022. There were 2 interview rounds.
Verbal ability test, General Mental Ability test
I applied via Recruitment Consultant and was interviewed in Mar 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.
The CO gas limit is the maximum allowable concentration of carbon monoxide in the air.
The CO gas limit is set by regulatory agencies to protect human health and safety.
The limit varies depending on the location and type of facility.
For example, the Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit (PEL) of 50 parts per million (ppm) for an 8-hour workday.
In residential homes, the...
Top trending discussions
posted on 1 Jul 2024
based on 12 interviews
Interview experience
based on 112 reviews
Rating in categories
Deputy Manager
1.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
716
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
406
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
390
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
365
salaries
| ₹0 L/yr - ₹0 L/yr |
Larsen & Toubro Limited
Reliance Infrastructure
GMR Group
Hindustan Construction Company