Filter interviews by
I applied via campus placement at National Institute of Technology (NIT), Hamirpur and was interviewed in Oct 2024. There were 3 interview rounds.
Round 1 was a online test on Microsoft forms, 50 questions were there to be done in 60 minutes, consist of quantitative and verbal aptitude and subject matter.
The cutoff for civil engineering was 40/50, you can qualify this test, if you are giving placement tests seriously.
I am a dedicated Civil Engineer with a passion for designing and constructing sustainable infrastructure.
Graduated with a degree in Civil Engineering from XYZ University
Experienced in designing and managing construction projects
Skilled in using AutoCAD and other engineering software
Strong understanding of structural analysis and building codes
Completed internships at construction firms like ABC Construction
I applied via Referral and was interviewed before Jul 2021. There were 3 interview rounds.
Weight of 12 mm dia steel 1 meter
Weight of 12mm dia steel rod per meter can be calculated using the formula (d^2/162) where d is the diameter of the rod in mm.
The weight of 12mm dia steel rod per meter is approximately 0.89 kg.
The weight of steel varies depending on the type of steel and its composition.
BBS stands for Bar Bending Schedule. It is used in construction to provide details of reinforcement steel required for a particular concrete structure.
BBS is used to determine the quantity of steel required for a particular concrete structure.
It provides details of the diameter, length, and number of steel bars required for the structure.
BBS helps in estimating the cost of reinforcement steel for the project.
It ensures...
The foundation requirements for a substation depend on the type of equipment and soil conditions.
The foundation should be able to support the weight of the equipment and withstand any external forces such as wind or earthquakes.
The soil should be tested to determine its bearing capacity and settlement characteristics.
Common types of foundations include spread footings, mat foundations, and piles.
The foundation design s...
Yes, I am willing to relocate all over India for the right opportunity.
I am open to exploring opportunities in different parts of India.
I am willing to relocate for the right job and growth prospects.
I understand that relocation may be necessary for career advancement.
I am adaptable and can adjust to new environments and cultures.
For example, I have previously worked in different cities across India and have enjoyed th
Top trending discussions
I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.
I am unable to provide my previous salary as it is confidential. However, I am expecting a competitive salary based on my qualifications and experience.
My previous salary is confidential and I am unable to disclose it.
I am expecting a salary that is commensurate with my qualifications and experience.
I am open to discussing salary expectations during the negotiation process.
I believe that a competitive salary is importa...
I applied via Company Website and was interviewed before Aug 2020. There were 3 interview rounds.
Before casting a tower foundation, several things need to be checked to ensure its stability and durability.
Check the soil condition and bearing capacity
Ensure proper reinforcement and formwork
Verify the dimensions and alignment of the foundation
Check for any obstructions or utilities in the excavation area
Ensure proper curing of the concrete
Verify compliance with local building codes and regulations
Trapezoidal foundation quantity is calculated by finding the average width and multiplying it by the length and depth.
Measure the length and depth of the foundation
Measure the width at both ends and find the average width
Multiply the average width by the length and depth to get the volume
Calculate the quantity by multiplying the volume with the unit weight of concrete
Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.
To prepare for further construction on top of the piles
To ensure proper load transfer to the foundation
To facilitate the installation of pile caps or beams
To adjust the pile length if necessary
There are four deductions of 90 degree angles.
A 90 degree angle is formed when two lines intersect at a right angle.
In a square, all four angles are 90 degrees.
In a rectangle, opposite angles are 90 degrees.
In a right triangle, one angle is always 90 degrees.
Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.
Static load test involves applying a constant load to a structure and measuring its response over time.
Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.
Static load test helps determine the maxi...
The number of tolerance of pile load test depends on the specific project requirements and standards.
The number of tolerance of pile load test can vary based on the project specifications and standards.
Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.
Some projects may have more stringent tolerance requirements depending on the criticality of the structure.
It is important to refer...
Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.
Range density of bentonite is typically between 17-22 lb/gal.
Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.
The range density of bentonite is important for determining its effectiveness in different applications.
Higher range density ...
posted on 29 Jan 2024
I applied via Recruitment Consulltant and was interviewed in Dec 2023. There were 2 interview rounds.
I have experience with various types of foundations including shallow foundations, deep foundations, and pile foundations.
Shallow foundations: These are used when the soil is stable and can support the load of the structure. Examples include spread footings and mat foundations.
Deep foundations: These are used when the soil near the surface is not suitable for supporting the load. Examples include pile foundations and d...
posted on 25 Mar 2023
I applied via Newspaper Ad and was interviewed in Feb 2023. There were 2 interview rounds.
posted on 13 Nov 2023
I applied via Recruitment Consulltant and was interviewed before Nov 2022. There were 2 interview rounds.
I love construction line but one thing please provide some extra pay
posted on 14 Sep 2022
I was interviewed in Mar 2022.
I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.
I am unable to provide my previous salary as it is confidential. However, I am expecting a competitive salary based on my qualifications and experience.
My previous salary is confidential and I am unable to disclose it.
I am expecting a salary that is commensurate with my qualifications and experience.
I am open to discussing salary expectations during the negotiation process.
I believe that a competitive salary is importa...
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Electrical Engineer
37
salaries
| ₹2.2 L/yr - ₹5.4 L/yr |
Deputy Manager
35
salaries
| ₹5.7 L/yr - ₹10.5 L/yr |
Senior Electrical Engineer
34
salaries
| ₹3.8 L/yr - ₹7 L/yr |
Assistant Manager
31
salaries
| ₹4.6 L/yr - ₹12 L/yr |
Safety Officer
26
salaries
| ₹2.9 L/yr - ₹5.3 L/yr |
KEC International
Kalpataru Projects International
BHEL
Siemens