i
Sterling & Wilson
Filter interviews by
Clear (1)
I applied via Company Website and was interviewed before Aug 2020. There were 3 interview rounds.
Before casting a tower foundation, several things need to be checked to ensure its stability and durability.
Check the soil condition and bearing capacity
Ensure proper reinforcement and formwork
Verify the dimensions and alignment of the foundation
Check for any obstructions or utilities in the excavation area
Ensure proper curing of the concrete
Verify compliance with local building codes and regulations
Trapezoidal foundation quantity is calculated by finding the average width and multiplying it by the length and depth.
Measure the length and depth of the foundation
Measure the width at both ends and find the average width
Multiply the average width by the length and depth to get the volume
Calculate the quantity by multiplying the volume with the unit weight of concrete
Top trending discussions
posted on 7 Sep 2022
I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 2 interview rounds.
posted on 11 Feb 2021
I applied via Campus Placement and was interviewed before Feb 2020. There were 5 interview rounds.
Cube mould size is a standard size used for testing the compressive strength of concrete.
Cube moulds are typically made of steel or cast iron.
The standard size for cube moulds is 150mm x 150mm x 150mm.
Other sizes such as 100mm x 100mm x 100mm and 200mm x 200mm x 200mm are also used.
The moulds are filled with concrete and left to cure before being tested for compressive strength.
Cube moulds are used to ensure that the c...
To calculate the weight of an 8mm diameter steel rod, use the formula: weight = volume x density.
Calculate the volume of the rod using the formula: volume = π x (diameter/2)^2 x length
Find the density of steel, which is typically around 7850 kg/m^3
Multiply the volume by the density to get the weight of the rod
posted on 14 Apr 2022
I applied via AmbitionBox and was interviewed in Mar 2022. There were 2 interview rounds.
posted on 14 Aug 2023
I was interviewed before Aug 2022.
The thickness of outer side plaster can vary depending on the specific requirements of the project.
The thickness of outer side plaster is typically around 15-20 mm.
However, it can be adjusted based on factors such as the type of building, weather conditions, and structural requirements.
Consulting with a structural engineer or architect is recommended to determine the appropriate thickness for the outer side plaster.
Grade of concrete for RCC is typically M20, M25, M30, etc. which represent the compressive strength of concrete mix.
Grade of concrete is denoted by the mix ratio of cement, sand, and aggregates.
Common grades include M20, M25, M30, etc. where 'M' stands for mix and the number represents the compressive strength in MPa.
Higher grade concrete like M30 is used for structures requiring higher strength like bridges, dams, etc...
posted on 13 Nov 2023
I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.
Civil engineering building construction, metro project surveying
posted on 29 Nov 2021
I applied via Recruitment Consultant and was interviewed in Oct 2021. There was 1 interview round.
Pre Cast work is the process of manufacturing concrete elements in a factory and transporting them to the construction site for assembly.
Pre Cast work involves creating concrete elements such as walls, columns, and beams in a factory setting
These elements are then transported to the construction site for assembly
Pre Cast work can save time and money on construction projects
Examples of Pre Cast elements include precast ...
posted on 14 May 2024
Math reasoning english
posted on 24 Jan 2022
Pipe laying, sewer networking, and road restoration are essential tasks for civil site engineers.
Pipe laying involves the installation of pipes for water supply, drainage, and sewage systems.
Sewer networking involves connecting pipes to create a network for the transportation of sewage and wastewater.
Road restoration involves repairing and maintaining roads and pavements that have been damaged due to construction work.
...
IC chamber is used for the treatment of industrial effluent and wastewater.
IC stands for Ion Exchange Chromatography
IC chamber is used to remove heavy metals, organic compounds, and other pollutants from wastewater
It works by exchanging ions in the wastewater with ions in the resin beads inside the chamber
Effluent treated in IC chamber can be reused for industrial purposes or discharged into the environment
IC chamber i...
posted on 7 Jan 2023
I applied via Recruitment Consulltant and was interviewed in Dec 2022. There were 2 interview rounds.
Code of reinforcement refers to the standards and guidelines for the use of reinforcement in construction.
Code of reinforcement provides specifications for the size, spacing, and placement of reinforcement in concrete structures.
It also includes guidelines for the quality and testing of reinforcement materials.
Examples of code of reinforcement include ACI 318, Eurocode 2, and BS 8110.
Following the code of reinforcement...
based on 7 reviews
Rating in categories
Electrical Engineer
270
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
246
salaries
| ₹0 L/yr - ₹0 L/yr |
Project Engineer
235
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
165
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
137
salaries
| ₹0 L/yr - ₹0 L/yr |
Larsen & Toubro Limited
Tata Power
Thermax Limited
BHEL