Ramky Infrastructure Civil Site Engineer Interview Questions and Answers

Q1. Slop of stairs case
Ans. 
The slope of stairs refers to the angle at which the stairs are inclined, affecting safety and accessibility.
• The slope of stairs is typically between 30-35 degrees for comfortable and safe use.

• Building codes may dictate specific slope requirements for stairs to ensure safety and accessibility.

• The slope of stairs can be calculated using trigonometry, with the rise and run of the stairs determining the angle.

• A steep slop...read more
Answered by AI
Add your answer
Q2. Why covering provided in steel reinforcement?
Ans. 
Covering is provided in steel reinforcement to protect it from corrosion and to ensure proper bond with concrete.
• Covering protects steel reinforcement from corrosion caused by exposure to moisture and chemicals in the environment.

• It helps in maintaining the bond between steel reinforcement and concrete, ensuring structural integrity.

• Proper covering thickness is important to prevent rusting of steel bars and maintain du...read more
Answered by AI
Add your answer

Q1. What is the leaping zone of steel rainforcement ?
Ans. 
The leaping zone of steel reinforcement refers to the area where the steel bars are not provided in a concrete member.
• The leaping zone is typically found in beams and slabs where the steel reinforcement is not required to be continuous.

• It is important to ensure that the leaping zone does not compromise the structural integrity of the member.

• Proper detailing and design considerations are necessary to determine the exten...read more
Answered by AI
Add your answer
Q2. How can identify the site uses materials?
Ans. 
Site uses materials can be identified through visual inspection, testing, and documentation.
• Conduct visual inspection of materials on site to identify their type and quality

• Perform tests on materials such as soil, concrete, and asphalt to determine their properties

• Review documentation such as material specifications, delivery receipts, and quality control reports

• Consult with suppliers and manufacturers to verify the au
Answered by AI
Add your answer

Q1. Draw the section of stairs case with reinforcement.
Ans. 
A section of stairs case with reinforcement is a structural drawing showing the details of the stairs and the reinforcement bars used for strength.
• Include dimensions and materials used for the stairs and reinforcement bars

• Show the arrangement of reinforcement bars in the section view

• Label the different components of the stairs case for clarity
Answered by AI
Add your answer
Q2. What is the component of maivan technology
Ans. 
Maivan technology consists of various components including sensors, software, and data analytics for monitoring and managing civil infrastructure.
• Sensors are used to collect data on various parameters such as temperature, humidity, and structural integrity.

• Software is utilized to process the data collected by sensors and provide real-time monitoring and analysis.

• Data analytics tools are employed to identify patterns, t...read more
Answered by AI
Add your answer

Q1. Minimum cement contains in RCC structure
Ans. 
The minimum cement content in RCC structure is typically around 300 kg/m3.
• Minimum cement content is usually specified by structural engineers based on design requirements.

• Higher cement content may be required for structures in aggressive environments or with special design considerations.

• The minimum cement content is important for achieving the desired strength and durability of the concrete mix.
Answered by AI
Add your answer
Q2. In slump cone test what is the shape of slump
Ans. 
The shape of slump in a slump cone test is typically conical.
• The shape of slump is conical, with the top being wider than the base.

• The height of the slump is measured to determine the workability of the concrete.

• Different types of slumps (true slump, shear slump, collapse slump) indicate different levels of workability.

• Example: A true slump has a smooth, symmetrical shape with a slight collapse at the center.
Answered by AI
Add your answer

Q1. Lapping zone of column
Ans. 
Lapping zone of column is where two reinforcement bars overlap to ensure continuity of load transfer.
• Lapping zone should be at least 50 times the diameter of the smaller bar away from the face of the support.

• Proper lapping length is crucial for structural integrity and load distribution.

• Lapping should be staggered in multiple layers for better strength.

• Ensure proper cover and clear spacing around the lapping zone to pr
Answered by AI
Add your answer

Q1. Technical side question
Add your answer
Q2. Civil engineering jobs in
Add your answer

Q1. Civil structure
Add your answer
Q2. Civil engineering construction
Add your answer

It was very good , they give certain time to prepare yourself

It's basically arithmetic and reasoning test

Q1. What is the nominal size of brick
Ans. 
The nominal size of a brick is the size specified by the manufacturer for identification and classification purposes.
• The nominal size of a brick is typically larger than its actual size to account for mortar joints.

• Common nominal sizes for bricks include 4 inches by 8 inches by 2 1/4 inches and 3 5/8 inches by 2 1/4 inches by 8 inches.

• It is important to consider the nominal size when planning and designing brickwork pr
Answered by AI
Add your answer
Q2. What are the admixture of concrete
Ans. 
Admixtures are added to concrete to alter its properties or enhance its performance.
• Admixtures can improve workability, durability, strength, and set time of concrete

• Types of admixtures include water reducers, accelerators, retarders, air-entraining agents, and superplasticizers

• Example: Adding a water reducer admixture can increase the workability of concrete without compromising strength
Answered by AI
Add your answer

Q1. Cut length of spiral stirrup for pile..
Ans. 
The cut length of spiral stirrup for a pile is determined based on the diameter of the pile and the spacing required for the stirrups.
• Calculate the circumference of the pile using the formula C = π * d, where d is the diameter of the pile.

• Determine the spacing required for the spiral stirrups based on design specifications.

• Multiply the circumference of the pile by the number of required spiral stirrups to get the total...read more
Answered by AI
Add your answer
Q2. Axial load on column
Ans. 
Axial load on column refers to the vertical force acting on the column, typically due to the weight of the structure it supports.
• Axial load is the force that acts along the longitudinal axis of the column.

• It is important to consider axial load in column design to ensure structural stability.

• Examples of factors affecting axial load include dead loads, live loads, and wind loads on the structure.
Answered by AI
Add your answer

Q1. About tunneling pramery and secondary structure
Add your answer

Q1. Basic construction techniques to be known
Ans. 
Basic construction techniques include excavation, foundation construction, concrete pouring, framing, and finishing.
• Excavation: Digging and removing soil to prepare the site for construction.

• Foundation construction: Building the base of the structure to provide stability.

• Concrete pouring: Pouring and leveling concrete to create floors, walls, and other structural elements.

• Framing: Constructing the skeletal framework of...read more
Answered by AI
Add your answer

Q1. Your present job profile is important
Add your answer
Q2. What is your work and responsiblety
Add your answer

Q1. What are your salary expectations?
Add your answer
Q2. Where do you see yourself in 5 years?
Add your answer
Q3. Tell me about yourself.
Add your answer