Filter interviews by
I applied via Naukri.com and was interviewed in Aug 2023. There were 3 interview rounds.
I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.
Rotation equipment can develop sound and vibration due to various reasons such as imbalance, misalignment, wear and tear, or bearing issues.
Imbalance in rotating parts can cause vibration and noise. For example, a misaligned shaft or uneven distribution of mass.
Misalignment of components can lead to vibration and noise. For instance, if a motor shaft is not properly aligned with the pump shaft.
Wear and tear in bearings...
Breathers are devices used to prevent the build-up of pressure or vacuum within a sealed container or system.
Breathers allow for the exchange of air to prevent pressure differentials.
They are commonly used in hydraulic systems to prevent contamination.
Breathers can also be used in storage tanks to prevent the formation of a vacuum.
The purpose of breathers is to maintain optimal operating conditions within a system.
Inter cooler in an air line is used to cool down the compressed air before it enters the engine, increasing its density and efficiency.
Increases air density for better combustion efficiency
Reduces the risk of engine knocking or detonation
Improves overall engine performance and power output
Periodical maintenance refers to regular scheduled maintenance tasks performed on equipment or systems to ensure optimal performance and prevent breakdowns.
Periodical maintenance involves routine inspections, cleaning, lubrication, and adjustments.
It helps to identify and address potential issues before they become major problems.
Examples include changing the oil in a car every 5,000 miles, inspecting HVAC systems quar
A checklist is a list of items or tasks that need to be completed or verified.
Used to ensure all necessary tasks are completed
Can be used in various fields such as project management, quality control, and safety inspections
Examples: pre-flight checklist for pilots, grocery shopping list, daily to-do list
A,B,C&D Service refers to different levels of maintenance services provided for equipment or machinery.
A Service: Regular maintenance to prevent breakdowns
B Service: Intermediate level maintenance to address minor issues
C Service: Major maintenance to address significant issues
D Service: Overhaul or complete refurbishment of the equipment
Example: A car manufacturer may offer A, B, C, and D services for their vehicles
Tail light, high intensity light Radium Stickers are reflective stickers used on vehicles to enhance visibility and safety.
Tail light Radium Stickers are placed on the rear of vehicles to make them more visible in low light conditions.
High intensity light Radium Stickers are used on bicycles, helmets, and other objects to increase visibility to others.
These stickers contain radium material that reflects light, making t...
RR stands for Relative Risk, BD stands for Base Diameter, and LBD stands for Largest Base Diameter.
RR is a measure of the risk of an event happening in one group compared to another group.
BD refers to the diameter of the base of a structure or object.
LBD is specifically referring to the largest diameter of the base of a structure or object.
Example: RR can be used in epidemiology to compare the risk of developing a dise...
PTO in In Power and Documents stands for Power Take Off, a mechanism used to transfer power from a vehicle's engine to another application.
PTO is commonly used in trucks and other heavy-duty vehicles to power auxiliary equipment such as hydraulic pumps or generators.
In In Power and Documents, PTO may refer to the specific settings or configurations related to power take off systems in vehicles.
Understanding PTO in In P...
LCV stands for Light Commercial Vehicles and HDD stands for Heavy Duty Vehicles.
LCV vehicles are designed for transporting goods or passengers with a gross vehicle weight of up to 3.5 tons.
Examples of LCV vehicles include vans, pickup trucks, and small buses.
HDD vehicles are designed for heavy-duty tasks such as construction, mining, or transportation of heavy loads.
Examples of HDD vehicles include dump trucks, tractor
The 'W' in 15W/40 oil stands for winter, indicating the oil's viscosity in cold temperatures.
The 'W' stands for 'winter' in multi-grade oils, indicating the oil's viscosity in cold temperatures
The number before the 'W' (15 in this case) represents the oil's viscosity at low temperatures
The number after the 'W' (40 in this case) represents the oil's viscosity at high temperatures
The size of the bolt head will typically be larger than the bolt thread size.
The size of the bolt head is usually larger than the bolt thread size for proper grip and torque application.
Common sizes for bolt heads include 22mm, 24mm, 27mm, etc.
The size of the bolt head is determined based on the application and required torque specifications.
The inserting shaft size for a ball bearing number 6405 is typically 25 mm.
The inserting shaft size for ball bearing 6405 is usually 25 mm.
The shaft size can vary depending on the specific design and application.
It is important to ensure the correct shaft size is used to prevent damage to the bearing.
I applied via LinkedIn and was interviewed before Aug 2023. There were 2 interview rounds.
General Aptitude topics
L&T Construction interview questions for designations
I applied via Referral and was interviewed before Aug 2023. There was 1 interview round.
Get interview-ready with Top L&T Construction Interview Questions
Medium range tough questions were asked
HIRA stands for Hazard Identification and Risk Assessment. There are four types of fires: Class A, B, C, and D.
HIRA is a process of identifying potential hazards and assessing the risks associated with them.
It involves identifying the hazards, evaluating the risks, and implementing control measures to mitigate the risks.
Class A fires involve ordinary combustibles like wood, paper, and cloth.
Class B fires involve flamma...
Acts used in safety include preventive, corrective, detective, and compensatory measures.
Preventive measures aim to avoid accidents or incidents from happening, such as safety training, equipment maintenance, and hazard identification.
Corrective measures are taken after an accident or incident has occurred, such as first aid, repairs, and investigations.
Detective measures involve monitoring and identifying potential ha...
I applied via Naukri.com and was interviewed before May 2023. There was 1 interview round.
Types of delay include network delay, processing delay, transmission delay, and queuing delay.
Network delay: caused by the time it takes for data packets to travel across a network.
Processing delay: occurs when a device needs time to process data before forwarding it.
Transmission delay: results from the time it takes for data to be transmitted over a medium.
Queuing delay: happens when data packets are held in a queue b
Concurrent delay occurs when multiple delays impact a project at the same time.
Concurrent delays can result in a longer overall project duration.
Examples include bad weather and labor strikes happening simultaneously.
Proper documentation is crucial to identify and address concurrent delays.
Contractual agreements may specify how concurrent delays are handled.
Level in survey refers to the height or elevation of a point relative to a reference point.
Level is a measurement of height or elevation in surveying.
It is used to determine the difference in elevation between two points.
A level instrument, such as a level rod or laser level, is used to take measurements.
Leveling is important in construction, engineering, and land surveying.
Examples of level surveys include topographic...
Cement mortar strength refers to the ability of the mixture to resist compression and tension forces.
Cement mortar strength is measured in terms of compressive strength and tensile strength.
The compressive strength of cement mortar is determined by subjecting a cube of the mixture to a compressive load until it fails.
The tensile strength of cement mortar is determined by subjecting a prismatic specimen of the mixture t...
I applied via campus placement at National Institute of Technology (NIT), Durgapur and was interviewed before Mar 2023. There were 2 interview rounds.
Civil engineering question
Top trending discussions
Some of the top questions asked at the L&T Construction Senior Engineer interview -
based on 16 interviews
3 Interview rounds
based on 230 reviews
Rating in categories
Assistant Manager
1.1k
salaries
| ₹6 L/yr - ₹18.2 L/yr |
Senior Engineer
711
salaries
| ₹3 L/yr - ₹12 L/yr |
Assistant Construction Manager
504
salaries
| ₹5.4 L/yr - ₹18 L/yr |
Construction Management
332
salaries
| ₹8.2 L/yr - ₹35 L/yr |
Assistant Engineering Manager
321
salaries
| ₹6 L/yr - ₹17 L/yr |
Tata Projects
Shapoorji Pallonji Group
Hindustan Construction Company
GAMMON INDIA