Upload Button Icon Add office photos

Filter interviews by

Techno Electric & Engineering Company Electrical Engineer Interview Questions and Answers

Updated 26 Mar 2023

Techno Electric & Engineering Company Electrical Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - One-on-one 

(2 Questions)

  • Q1. Experience? And basic electrical questions
  • Q2. Basic electrical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - TEECL Is the best company..
But you have to struggle for salary because they pays you very low salary.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Transformer tests
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Star delta starter
  • Q2. Vfd,plc transformer
  • Q3. RCA capa break down entry,data entry

I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Control wiring for ACB and VCB?
  • Ans. 

    Control wiring for ACB and VCB involves connecting control circuits to the breaker for proper operation.

    • Control wiring connects the breaker control circuits to the control panel.

    • The wiring should be properly sized and insulated.

    • The wiring should be color-coded for easy identification.

    • The wiring should be tested for proper operation before energizing the breaker.

    • Examples of control circuits include trip coil, close coil

  • Answered by AI
  • Q2. How to read right control wiring
  • Ans. 

    Control wiring is read by understanding the symbols and connections on the diagram.

    • Identify the power source and the load

    • Understand the symbols used for switches, relays, and other components

    • Follow the connections and determine the control logic

    • Check for any safety interlocks or emergency stops

    • Verify the wiring matches the diagram

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be practice. And general work

I applied via Referral

Interview Questionnaire 

2 Questions

  • Q1. I was asked about power Converters.
  • Q2. I was asked about Traction Transformers

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be true. Never give bluff.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. ANY ONE electrical SOLAR WORK
  • Q2. Solar work electrical maintenance

I applied via Walk-in and was interviewed in Sep 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Make star delta starter
  • Ans. 

    A star delta starter is a type of motor starter used to reduce the starting current of a motor.

    • Connect the motor windings in a star configuration for starting

    • Switch the motor windings to a delta configuration once it reaches a certain speed

    • Use a contactor and timer to control the switching

    • Commonly used for large motors to reduce starting current and prevent damage to the motor

    • Requires knowledge of motor wiring and cont

  • Answered by AI
  • Q2. Drive kyu lagaya jata hai
  • Q3. What is power saving
  • Ans. 

    Power saving refers to reducing energy consumption to conserve resources and reduce costs.

    • Using energy-efficient appliances and light bulbs

    • Turning off electronics when not in use

    • Using power strips to easily turn off multiple devices

    • Adjusting thermostat settings to reduce heating and cooling

    • Using renewable energy sources like solar panels

    • Implementing energy-saving practices in industries and businesses

  • Answered by AI
  • Q4. Why do you want to change jobs
  • Q5. What protection is there in the dg
  • Ans. 

    DG sets have various protection mechanisms to ensure safe and efficient operation.

    • Overload protection

    • Short circuit protection

    • Under/over voltage protection

    • Over/under frequency protection

    • Reverse power protection

    • Earth fault protection

    • Cooling system protection

    • Fuel system protection

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I gave a very comfortable interview and I was ready so I did not have any problem

Skills evaluated in this interview

I applied via Referral and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Reg my last job role... protection at panels and motors.

Interview Preparation Tips

Interview preparation tips for other job seekers - Better to choose other company for better future
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Working of power transformer
  • Ans. 

    A power transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Power transformers are used to step up or step down voltage levels in electrical power transmission and distribution systems.

    • They consist of a primary winding, a secondary winding, and a magnetic core.

    • When an alternating current flows through the primary winding, it creates a magne...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, answer without hesitate

Interview Questionnaire 

2 Questions

  • Q1. What is the interlocks
  • Ans. 

    Interlocks are safety mechanisms that prevent equipment from operating under unsafe conditions.

    • Interlocks are used in various industries to prevent accidents and damage to equipment.

    • They can be mechanical, electrical, or software-based.

    • Examples include emergency stop buttons, safety gates, and pressure switches.

    • Interlocks are designed to be fail-safe, meaning that they will prevent operation even if a component fails.

    • T...

  • Answered by AI
  • Q2. How many types safety
  • Ans. 

    There are several types of safety measures in electrical engineering.

    • Electrical safety

    • Fire safety

    • Equipment safety

    • Personal safety

    • Environmental safety

  • Answered by AI

Techno Electric & Engineering Company Interview FAQs

How many rounds are there in Techno Electric & Engineering Company Electrical Engineer interview?
Techno Electric & Engineering Company interview process usually has 2 rounds. The most common rounds in the Techno Electric & Engineering Company interview process are Resume Shortlist and One-on-one Round.
How to prepare for Techno Electric & Engineering Company Electrical Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Techno Electric & Engineering Company. The most common topics and skills that interviewers at Techno Electric & Engineering Company expect are AutoCAD, Design Calculations, Design Validation, ETAP and Electrical Design.
What are the top questions asked in Techno Electric & Engineering Company Electrical Engineer interview?

Some of the top questions asked at the Techno Electric & Engineering Company Electrical Engineer interview -

  1. Experience? And basic electrical questi...read more
  2. Basic electrical questi...read more

Tell us how to improve this page.

Techno Electric & Engineering Company Electrical Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Techno Electric & Engineering Company Electrical Engineer Salary
based on 37 salaries
₹2.1 L/yr - ₹5.4 L/yr
24% less than the average Electrical Engineer Salary in India
View more details

Techno Electric & Engineering Company Electrical Engineer Reviews and Ratings

based on 9 reviews

4.4/5

Rating in categories

4.5

Skill development

4.4

Work-life balance

4.0

Salary

4.0

Job security

4.3

Company culture

3.2

Promotions

4.5

Work satisfaction

Explore 9 Reviews and Ratings
Electrical Engineer
37 salaries
unlock blur

₹2.2 L/yr - ₹5.4 L/yr

Deputy Manager
34 salaries
unlock blur

₹5.7 L/yr - ₹10.5 L/yr

Senior Electrical Engineer
34 salaries
unlock blur

₹3.8 L/yr - ₹7 L/yr

Assistant Manager
29 salaries
unlock blur

₹4.6 L/yr - ₹12 L/yr

Safety Officer
26 salaries
unlock blur

₹2.9 L/yr - ₹5.3 L/yr

Explore more salaries
Compare Techno Electric & Engineering Company with

KEC International

4.0
Compare

Kalpataru Projects International

4.2
Compare

BHEL

4.1
Compare

Siemens

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview