Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Tata AutoComp Systems Team. If you also belong to the team, you can get access from here

Tata AutoComp Systems Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Tata AutoComp Systems Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 9 Apr 2024

Tata AutoComp Systems Graduate Engineer Trainee (Get) Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at Birsa Institute of Technology (BIT) Sindri, Jharkhand and was interviewed in Mar 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Verbal, quantitative and reasoning

Round 2 - Group Discussion 

Current relevance topics

Round 3 - Technical 

(1 Question)

  • Q1. Basic to intermediate about core subject
Round 4 - HR 

(1 Question)

  • Q1. Not qualified for HR round
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There were 4 interview rounds.

Round 1 - Aptitude Test 

Conducted in online mode for campus placements

Round 2 - Group Discussion 

Same as general GD no shortlisting at this point.

Round 3 - Technical 

(1 Question)

  • Q1. Questions on previous projects. GD&T.
Round 4 - HR 

(1 Question)

  • Q1. What's the desired job profile. Ideal team.

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear all the queries at the end of interview.

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. 1.Difference between 1st angle &3rd angle projection 2.Stress strain graphs for different materials 3. Material properties etc
  • Ans. 

    1st angle and 3rd angle projection differ in the placement of the object and the observer in relation to the projection plane.

    • 1st angle projection places the object in front of the projection plane, while 3rd angle projection places the object behind the projection plane.

    • In 1st angle projection, the observer views the object from the opposite side of the projection plane, while in 3rd angle projection, the observer vie...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Verbal and communication skills Introduction, Educational qualification etc
Round 3 - Behavioral 

(1 Question)

  • Q1. Regarding projects did un college days and core technical queations

Interview Preparation Tips

Topics to prepare for CIE Automotive Graduate Engineer Trainee (Get) interview:
  • Catia V5
  • UG NX
  • Geometrical Dimensioning and Tol
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I was interviewed before Feb 2024.

Round 1 - Aptitude Test 

Quants, logical reasoning, and verbal analogy require an understanding of basic concepts along with tips and tricks to effectively solve the questions.

Round 2 - Technical 

(4 Questions)

  • Q1. What are bevel gears and what are their applications?
  • Q2. Define 5 GD&T Symbols, What is difference between Parallism and Flateness
  • Q3. How many microns are equivalent to 1 millimeter?
  • Q4. What is FEA analysis, and what tools are available to perform it?
Round 3 - HR 

(3 Questions)

  • Q1. Why do you want to work with us?
  • Q2. What are your expectations regarding the position?
  • Q3. How would you handle team members who have more experience than you if you are their team leader?
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Not Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

This round was conducted on online and it consists of Aptitude and core questions

Round 3 - Technical 

(2 Questions)

  • Q1. 1.What is theories of failure?
  • Ans. 

    Theories of failure are mathematical models used to predict the failure of materials under different loading conditions.

    • Theories of failure help engineers design structures that can withstand different types of loads.

    • Some common theories of failure include maximum shear stress theory, maximum normal stress theory, and maximum strain energy theory.

    • These theories are based on different assumptions about the behavior of m...

  • Answered by AI
  • Q2. 2. What is the working principle of diesel cycle?
  • Ans. 

    Diesel cycle is a thermodynamic cycle used in diesel engines to convert heat into work.

    • Air is compressed in the cylinder, causing its temperature to rise.

    • Fuel is injected into the cylinder, igniting due to the high temperature.

    • The expanding gases push the piston, converting heat into mechanical energy.

    • Exhaust gases are expelled from the cylinder.

    • Diesel cycle is more efficient than Otto cycle used in gasoline engines.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Need to have subject in core concepts and good communication skills is required.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at University of Petroleum and Energy Studies (UPES), Dehradun and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

BASIC TECHNICAL AND APTI QUESTIONS OF MODERATE DIFFICULTY

Round 2 - Technical 

(2 Questions)

  • Q1. INTRODUCTION OF YOURS, WHY THIS FIELD
  • Q2. SUBJECT RELATED QUESTIONS IS ASKED

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Easy test mostly based on syllabus

Round 3 - Technical 

(1 Question)

  • Q1. Basic of mechanical engineering
Round 4 - One-on-one 

(1 Question)

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - just go through the syllabus
do your best simple question where asked

I applied via campus placement at Maharaja Sayajirao University (MSU), Baroda and was interviewed in Jun 2021. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Favourite subject was asked then some technical questions about the subjects were asked
  • Q2. Final year project details
  • Q3. Tell me about yourself
  • Q4. What's your hobbies?
  • Q5. What did you do during 4 months free time after graduation

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and answer freely. Prepare one subject perfectly. They will definitely ask basic theoretical questions from one subject.

I applied via campus placement at Kongu Engineering College, Erode and was interviewed in Oct 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Draw shear stress and bending moment diagram of cantilever beam
  • Ans. 

    Draw shear stress and bending moment diagram of cantilever beam

    • Shear stress diagram shows the distribution of shear stress along the length of the beam

    • Bending moment diagram shows the distribution of bending moment along the length of the beam

    • Shear stress is maximum at the fixed end and zero at the free end

    • Bending moment is maximum at the fixed end and zero at the free end

    • The diagrams can be drawn using equations and b

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well on design subjects and project done

I applied via Recruitment Consultant and was interviewed before Jan 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About ur self. And based on automobile engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but majorly a stress test. It lasted for 25 min.

Tata AutoComp Systems Interview FAQs

How many rounds are there in Tata AutoComp Systems Graduate Engineer Trainee (Get) interview?
Tata AutoComp Systems interview process usually has 4 rounds. The most common rounds in the Tata AutoComp Systems interview process are Group Discussion, Technical and HR.
What are the top questions asked in Tata AutoComp Systems Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Tata AutoComp Systems Graduate Engineer Trainee (Get) interview -

  1. Basic to intermediate about core subj...read more
  2. Not qualified for HR ro...read more

Tell us how to improve this page.

Tata AutoComp Systems Graduate Engineer Trainee (Get) Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more
Tata AutoComp Systems Graduate Engineer Trainee (Get) Salary
based on 74 salaries
₹2.2 L/yr - ₹6 L/yr
27% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Tata AutoComp Systems Graduate Engineer Trainee (Get) Reviews and Ratings

based on 8 reviews

3.3/5

Rating in categories

3.6

Skill development

3.9

Work-life balance

3.2

Salary

4.5

Job security

3.6

Company culture

3.2

Promotions

3.6

Work satisfaction

Explore 8 Reviews and Ratings
Assistant Manager
390 salaries
unlock blur

₹3.5 L/yr - ₹14 L/yr

Senior Engineer
195 salaries
unlock blur

₹3 L/yr - ₹10.5 L/yr

Senior Design Engineer
176 salaries
unlock blur

₹3.7 L/yr - ₹13.5 L/yr

Design Engineer
139 salaries
unlock blur

₹2.4 L/yr - ₹9.6 L/yr

Quality Engineer
133 salaries
unlock blur

₹1.2 L/yr - ₹6.8 L/yr

Explore more salaries
Compare Tata AutoComp Systems with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Sundaram Clayton

4.1
Compare

Rane Group

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview