i
Tata AutoComp Systems
Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
Yes, I have worked before in various internships and part-time positions.
I have completed internships at ABC Company and XYZ Organization.
I have worked part-time as a sales associate at Retail Store.
I have also volunteered at local community events.
I have gained valuable experience and skills from my previous work experiences.
I applied via Walk-in and was interviewed before Sep 2021. There was 1 interview round.
Single line diagram is a simplified representation of power transmission system.
It shows the electrical components and their connections in a single line format
It is used to understand the flow of power and control signals in the system
It helps in identifying faults and troubleshooting
Example: A single line diagram of a substation shows the transformer, circuit breakers, and other equipment connected in a single line
Ex...
I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.
The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.
Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.
Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.
Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for
A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.
Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.
They are designed to capture particles that are smaller than what can be filtered by regular filters.
These filters can be made of various materials such as paper, fabric, or synthetic fibers.
Examples of size ...
Direct metalizing is applicable on materials that can conduct electricity.
Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.
The material should be able to conduct electricity for direct metalizing to be applicable.
Materials like plastic, glass, and ceramics can be direct metalized.
Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.
The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.
UV energy required for curing varies depending on the material being cured
Intensity of the UV light also affects the amount of energy required
UV energy is typically measured in Joules per square centimeter (J/cm²)
Examples of materials that require UV curing include adhesives, coatings, and inks
The amount of DFT required as per standard varies depending on the specific industry and project requirements.
The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.
Different industries may have different standards for DFT.
The complexity and size of the project also influence the amount of DFT required.
DFT techniques include scan chains, built-in self-test (BI...
I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 6 interview rounds.
Introduction and few case study intraction with MD sir
I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.
I applied via Campus Placement and was interviewed before Feb 2023. There were 2 interview rounds.
Supply chain is the process of managing the flow of goods and services from the point of origin to the point of consumption.
Supply chain involves the coordination and integration of various activities such as procurement, production, transportation, warehousing, and distribution.
It includes the movement of raw materials, work-in-progress goods, and finished products.
Supply chain management aims to optimize efficiency, ...
A boiler is a closed vessel in which water or other fluid is heated to generate steam or hot water.
Boilers are commonly used in industries and residential buildings for heating purposes.
They work by transferring heat from a fuel source to the water or fluid inside the boiler.
The heated water or steam is then circulated throughout the building or used for various processes.
Boilers can be fueled by various sources such a...
I applied via Referral and was interviewed in Mar 2023. There were 3 interview rounds.
Communication skill was tested
Bridgestone Corporation is the world's largest tyre manufacturer.
Bridgestone Corporation is a Japanese multinational auto and truck parts manufacturer founded in 1931.
It is headquartered in Kyobashi, Chuo, Tokyo, Japan.
Bridgestone is known for its high-quality tires and innovative technology.
The company operates in over 150 countries worldwide.
Some popular Bridgestone tire models include the Potenza, Turanza, and Duele
Basic compounds of tyre include rubber, carbon black, and various chemicals.
Rubber is the main component of a tyre, providing flexibility and durability
Carbon black is added to improve the strength and wear resistance of the tyre
Chemicals such as sulfur, antioxidants, and accelerators are used in the vulcanization process to enhance the properties of the tyre
Tyres are crucial for a vehicle's performance, safety, and efficiency.
Provides traction for braking, accelerating, and cornering
Supports the vehicle's weight and maintains proper alignment
Affects fuel efficiency and overall driving comfort
Different types of tyres for various road conditions (e.g. all-season, winter, summer)
Regular maintenance and proper inflation are essential for longevity and safety
posted on 24 Dec 2024
I applied via Walk-in and was interviewed before Dec 2023. There were 3 interview rounds.
Core realted questions and the basic aptitude questions
Moulding is the process of shaping a material by using a mould to create a specific form or shape.
Moulding involves heating a material until it becomes pliable, then placing it into a mould to cool and harden into the desired shape.
Common materials used in moulding include plastics, metals, and ceramics.
There are different types of moulding processes such as injection moulding, blow moulding, and compression moulding.
M...
Components of a tyre include tread, sidewall, bead, and inner liner.
Tread: Provides traction and grip on the road surface.
Sidewall: Protects the tyre from damage and provides flexibility.
Bead: Secures the tyre to the wheel rim.
Inner liner: Helps maintain air pressure and prevents air leakage.
I am a recent graduate with a degree in engineering, eager to learn and grow in a hands-on environment.
Recent graduate with a degree in engineering
Eager to learn and grow in a hands-on environment
Strong problem-solving skills
Excellent communication skills
Previous internship experience at XYZ Company
I am a dedicated and hardworking individual with a strong desire to learn and grow in this field.
I have a strong work ethic and am willing to put in the effort to succeed.
I am eager to learn new skills and take on new challenges.
I am a team player and can work well with others to achieve common goals.
I applied via Approached by Company and was interviewed before Jan 2022. There were 4 interview rounds.
I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.
based on 1 interview
Interview experience
based on 6 reviews
Rating in categories
Assistant Manager
401
salaries
| ₹4.3 L/yr - ₹13.9 L/yr |
Senior Engineer
191
salaries
| ₹3.5 L/yr - ₹10.5 L/yr |
Senior Design Engineer
179
salaries
| ₹3.7 L/yr - ₹13.5 L/yr |
Deputy Manager
156
salaries
| ₹6 L/yr - ₹20.2 L/yr |
Design Engineer
141
salaries
| ₹2.4 L/yr - ₹8 L/yr |
Ceat Tyres
UNO Minda
Apollo Tyres
Exide Industries