Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Tata AutoComp Systems Team. If you also belong to the team, you can get access from here

Tata AutoComp Systems Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Tata AutoComp Systems Vice President (VP) Interview Questions and Answers

Updated 14 Jun 2021

Tata AutoComp Systems Vice President (VP) Interview Experiences

2 interviews found

I applied via Recruitment Consultant and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Explain Current supply chain constrains and solutions
  • Ans. 

    Current supply chain constraints include disruptions due to COVID-19, shortage of raw materials, and transportation issues. Solutions include diversifying suppliers, increasing inventory, and improving communication.

    • COVID-19 has caused disruptions in supply chains worldwide

    • Shortage of raw materials due to increased demand and limited production

    • Transportation issues such as port congestion and lack of truck drivers

    • Diver...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well with specific examples of the key situations and contributions you did during your recent career experience.

I applied via Naukri.com and was interviewed before Dec 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. How to remain independent of peer pressure and fulfilling your objective of being independent
  • Q2. It's important to understand the role and remain objective . remain stuck to the issue without getting influenced by a particular view . clear communication is the key

Interview Preparation Tips

Interview preparation tips for other job seekers - be clear about your role and function to be performed . remain faithful and confident of your skill and expertise

Vice President (VP) Interview Questions Asked at Other Companies

Q1. How soon can you grow our business vertical to INR 100 Cr per yea ... read more
Q2. How epc business can survive the todays scenerio when market is t ... read more
asked in Facebook
Q3. What are your favorite products and how would you improve them..?
Q4. What are the prevailing problems in SCM industry ?
Q5. What is your methodology to address the same ?

Interview questions from similar companies

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions regarding GDC process, rejection control and analysis..
  • Q2. Hypothetical questions, besed on situation handling, manpower handling and decision making

Interview Preparation Tips

Interview preparation tips for other job seekers - Be specific and speak confident
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About HIL testing
  • Q2. About vector tools

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about CAN

I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Write and explain GD&T symbols?
  • Ans. 

    GD&T symbols are used to specify the geometric requirements of a part or assembly.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more

    • Each symbol has a specific meaning and is used to communicate precise engineering requirements

    • GD&T is used in industries such as aerospace, automotive, and manufacturing

    • Example: A position symbol...

  • Answered by AI
  • Q2. Explain Cp, Cpk & Pp, Ppk?
  • Ans. 

    Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.

    • Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.

    • Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.

    • All four indices are calculated using the process me...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Related to GD&T, CNC programming knowledge, SPC, Fixture design and development, Tool design and development.

Interview Preparation Tips

Interview preparation tips for other job seekers - Willing to work extra hours and ready to compromise family members.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Casting should be thorough

Round 2 - Case Study 

Aluminium die Casting

Interview Preparation Tips

Interview preparation tips for other job seekers - Casting prep well

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What are the die casting and machining defects?
  • Ans. 

    Die casting and machining defects are common in manufacturing processes.

    • Die casting defects include porosity, shrinkage, cold shuts, and flash.

    • Machining defects include burrs, chatter marks, and tool marks.

    • Die casting defects can be caused by improper temperature, pressure, or metal flow.

    • Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.

    • Defects can lead to part failure, reduced

  • Answered by AI
  • Q2. What is the formula of filling and high speed ratio?
  • Ans. 

    Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.

    • Filling and high speed ratio formula is V/Q

    • V is the volume of the container and Q is the flow rate of the liquid

    • The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate

    • The higher the flow rate, the faster the c

  • Answered by AI
  • Q3. Why do u want to join Motherson?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always job needy in front of interviewer.
Contribute & help others!
anonymous
You can choose to be anonymous

Recently Viewed

INTERVIEWS

Bosch Chassis Systems

No Interviews

SALARIES

Bharat Petroleum Mumbai Refinery

INTERVIEWS

Bosch Chassis Systems

No Interviews

REVIEWS

Bharat Petroleum Mumbai Refinery

No Reviews

INTERVIEWS

Bosch Chassis Systems

No Interviews

INTERVIEWS

Bosch Chassis Systems

No Interviews

JOBS

Kotak Mahindara Life Insurance

No Jobs

INTERVIEWS

Bosch Chassis Systems

No Interviews

JOBS

Bajaj Allianz Life Insurance

No Jobs

REVIEWS

_VOIS

No Reviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 330 Interviews
Varroc Group Interview Questions
3.6
 • 176 Interviews
UNO Minda Interview Questions
4.0
 • 169 Interviews
Exide Industries Interview Questions
3.5
 • 169 Interviews
Ceat Tyres Interview Questions
4.0
 • 161 Interviews
Apollo Tyres Interview Questions
4.0
 • 129 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
CIE Automotive Interview Questions
3.7
 • 74 Interviews
View all
Assistant Manager
393 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
226 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
178 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
147 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
141 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Tata AutoComp Systems with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Sundaram Clayton

4.1
Compare

Rane Group

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview