i
Larsen & Toubro Limited
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via campus placement at National Institute of Technology, Surathkal and was interviewed in Dec 2022. There was 1 interview round.
I applied via campus placement at National Institute of Technology (NIT), Tiruchirappalli and was interviewed before Jun 2022. There were 4 interview rounds.
It was basic aptitude test based on various topics such mensuration, speed, time etc
What people are saying about Larsen & Toubro Limited
Bending moment diagram shows the variation of bending moment along the length of a structure.
Bending moment diagram is a graphical representation of the bending moment at any point along the length of a structure.
It is plotted with respect to the length of the structure.
The diagram helps in determining the maximum bending moment and the location of the maximum bending moment.
It is used to design the size of the structu...
Bending moment diagram of an indeterminate beam and how to find moments at mid span.
To draw the bending moment diagram, first determine the reactions at the supports using equilibrium equations.
Then, use the method of superposition or moment distribution to determine the bending moment at any point on the beam.
To find the moments at mid span, divide the beam into two parts and use the principle of superposition to find...
Moment distribution method is a structural analysis technique used to solve indeterminate systems by distributing moments through the structure.
The method involves calculating fixed-end moments and distributing them through the structure until convergence is achieved.
The moments are distributed based on the stiffness of the members and the relative stiffness of the joints.
The process is repeated until the moments at ea...
Basic assumptions in Concrete Limit Design and method to design a beam.
Basic assumptions include linear stress distribution, plane sections remain plane, and elastic behavior of concrete up to a certain limit.
Design a beam by determining the maximum moment capacity and ensuring that the applied moment does not exceed this capacity.
Calculate the required reinforcement area and spacing based on the maximum moment capacit...
Working Stress Design Method is a traditional method used for designing steel structures.
It is based on the concept of allowable stress.
The stress in the structure is limited to a certain percentage of the yield stress of the material.
The design is done by assuming a certain load and then checking if the stresses are within the allowable limits.
This method is not commonly used nowadays as it does not take into account ...
Designing earthquake-resistant buildings involves considering various parameters and factors.
Determine the seismic zone of the location
Analyze the soil type and its bearing capacity
Select appropriate building materials and structural systems
Ensure proper connections and detailing of structural elements
Consider the effects of lateral loads and vibrations
Follow relevant building codes and standards
Conduct regular inspect...
To draw a Bending Moment Diagram, determine the reactions, calculate the shear force, and integrate it to get the bending moment.
Determine the reactions at the supports
Calculate the shear force at different points along the beam
Integrate the shear force to get the bending moment
Plot the bending moment diagram with the x-axis representing the length of the beam and the y-axis representing the bending moment
The bending m...
Constructing a green building in Rajasthan involves careful planning, use of sustainable materials, and efficient energy systems.
Conduct a site analysis to determine the best orientation and design for the building
Use locally sourced and sustainable materials for construction
Install energy-efficient systems such as solar panels and rainwater harvesting
Incorporate green spaces and landscaping to reduce heat island effec...
Thought process during Nucleus and overcoming glitches during interview
The thought process during Nucleus was to create a platform for students to showcase their skills and talents
The main glitches during the interview were technical issues with the platform and miscommunication with participants
To overcome these glitches, we conducted multiple trial runs and provided clear instructions to participants
We also had a ded...
I enjoy reading, hiking, and playing board games.
Reading: I love getting lost in a good book, especially science fiction and fantasy.
Hiking: I enjoy exploring new trails and being out in nature.
Board games: I like playing strategy games with friends and family, such as Settlers of Catan and Ticket to Ride.
Overcoming the loss of a loved one
The toughest situation in my life was when I lost my father unexpectedly.
I tackled it by seeking support from family and friends, and by focusing on self-care and healing.
I allowed myself to grieve and process the emotions, while also finding ways to honor my father's memory.
I joined a support group and attended therapy sessions to help me navigate through the grief.
Engaging in activit...
To find basic deflection in frame structure given a force.
Calculate the stiffness of the structure
Determine the displacement of each joint
Use superposition to find the total deflection
Consider boundary conditions
Apply appropriate formulae
Example: Euler-Bernoulli beam theory
Example: Moment distribution method
The number of beams in the room is not specified in the question.
The question does not provide any information about the number of beams in the room.
It is impossible to answer the question without additional information.
The interviewer may be testing the candidate's ability to ask clarifying questions.
Larsen & Toubro Limited interview questions for designations
I applied via campus placement at PSG College of Technology, Coimbatore and was interviewed in Apr 2024. There were 2 interview rounds.
Logical Reasoning and Quants Aptitude
First angle and third angle projections are two common methods used in technical drawing to represent 3D objects on a 2D plane.
First angle projection: object is placed in the first quadrant, with the front view on the top and the side view on the right.
Third angle projection: object is placed in the third quadrant, with the front view on the bottom and the side view on the left.
Both projections involve projecting the o...
Stress strain diagram of mild steel shows the relationship between stress and strain during deformation.
Stress strain diagram of mild steel typically shows a linear elastic region, followed by a yield point, plastic deformation, and ultimate failure.
The linear elastic region represents the material's ability to return to its original shape after the stress is removed.
The yield point is where the material begins to defo...
posted on 12 Nov 2024
The pH value of bentonite typically ranges from 8 to 10.
Bentonite is a clay material commonly used in construction and engineering projects.
The pH value of bentonite can vary depending on its source and composition.
A pH value of 7 is considered neutral, so bentonite is slightly alkaline.
The pH value of bentonite is important in determining its suitability for various applications.
FE500 is a grade of steel used in construction, indicating its yield strength in megapascals.
FE500 is a designation for a type of steel reinforcement used in construction
The 'FE' stands for 'iron', while '500' indicates the minimum yield strength in megapascals
FE500 steel is commonly used in reinforced concrete structures for its high strength and durability
posted on 10 Jul 2024
Yes, I have extensive experience with basements and below ground structures.
I have designed and analyzed numerous basements for residential and commercial buildings.
I am familiar with waterproofing techniques and soil mechanics related to below ground structures.
I have experience with retaining walls, foundations, and underground parking structures.
I have worked on projects involving deep excavations and shoring system...
Some of the top questions asked at the Larsen & Toubro Limited Pget interview -
based on 4 interviews
Interview experience
based on 4 reviews
Rating in categories
Assistant Manager
4.2k
salaries
| ₹5 L/yr - ₹18 L/yr |
Senior Engineer
3.5k
salaries
| ₹4.5 L/yr - ₹12.5 L/yr |
Engineer
1.2k
salaries
| ₹1.6 L/yr - ₹9.3 L/yr |
Assistant Construction Manager
1.2k
salaries
| ₹6 L/yr - ₹21 L/yr |
Manager
1.1k
salaries
| ₹9.3 L/yr - ₹30 L/yr |
Tata Group
Reliance Industries
Adani Group
Mahindra & Mahindra