AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
G R Infraprojects
Compare
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
G R Infraprojects Interview Questions, Process, and Tips
Top G R Infraprojects Interview Questions and Answers
- Q1. What should be the height of Tremie pipe from pile founding level during concrete?asked in Structural Engineer interview
- Q2. What is the provision of LG and what are the safety devices and procedures of lifting ?asked in Deputy Manager Safety interview
- Q3. What is dia of binding wire use in constructionasked in Junior Engineer interview
G R Infraprojects Interview Experiences
134 interviews found
Anonymous
Selected
I applied via Walk-in and was interviewed before Sep 2022. There were 3 interview rounds.
(6 Questions)
- Q1. What should be the height of Tremie pipe from pile founding level during concrete?
- Ans.
The height of Tremie pipe from pile founding level during concrete should be maintained at a certain level to ensure proper placement of concrete.
The Tremie pipe should typically be kept at a height of 1-2 meters above the pile founding level to prevent segregation of concrete.
Maintaining the correct height ensures that the concrete flows smoothly through the pipe and fills the pile without any gaps or voids.
Adjustment...
- Q2. Which all codes are used for structure engineering ?
- Ans.
Various codes are used in structural engineering to ensure safety and compliance with regulations.
International Building Code (IBC)
American Society of Civil Engineers (ASCE) standards
American Concrete Institute (ACI) standards
American Institute of Steel Construction (AISC) standards
Eurocode
National Building Code of Canada (NBCC)
- Q3. What is the role of bearings in Bridges?
- Ans.
Bearings in bridges help distribute loads and allow for movement due to temperature changes and seismic activity.
Bearings help distribute the loads from the bridge deck to the substructure, reducing stress on the bridge components.
Bearings allow for movement of the bridge deck due to temperature changes, seismic activity, and other factors.
Different types of bearings include elastomeric bearings, pot bearings, and slid...
- Q4. Which formula is used to calculate the elongation of PSC Girder?
- Ans.
The formula used to calculate the elongation of PSC Girder is based on the modulus of elasticity and the change in length.
The formula for calculating elongation is: Elongation = (Load x Length) / (Modulus of Elasticity x Area)
Modulus of Elasticity is a measure of a material's stiffness and is specific to the material used in the PSC Girder
The change in length is the difference between the original length and the length...
- Q5. What is the Process of Making PSC Girder?
- Ans.
The process of making PSC girder involves preparing the concrete mix, casting the girder in a formwork, curing, and testing for quality.
Prepare the concrete mix with a specific ratio of cement, aggregates, and water.
Pour the mix into a formwork that is designed to the shape and size of the girder.
Place prestressed steel strands or bars in the formwork before pouring the concrete to provide strength.
Cure the girder by m...
- Q6. What is socketing length in Pile?
- Ans.
Socketing length in pile refers to the length of the pile that is embedded into the rock or hard strata to provide additional support and stability.
Socketing length is determined based on the strength and stability of the rock or strata at the pile tip.
It helps in transferring the load from the pile to the rock or hard strata, increasing the overall capacity of the pile.
Socketing length can vary depending on the site c...
(4 Questions)
- Q1. Why do you want to leave your previous Job?
- Q2. Are you ready to relocate ?
- Q3. How much salary do you expect?
- Q4. Tell me am Example when you did Team Work.
Interview Preparation Tips
Top G R Infraprojects Structural Engineer Interview Questions and Answers
Structural Engineer Interview Questions asked at other Companies
Selected
(2 Questions)
- Q1. AutoCAD question
- Q2. Autocad related questions
(2 Questions)
- Q1. AutoCAD related questions
- Q2. AutoCAD related questions
(1 Question)
- Q1. AutoCAD related questions
Selected
(4 Questions)
- Q1. What is involved in electrical maintenance?
- Ans.
Electrical maintenance involves regular inspections, repairs, and upgrades to ensure safe and efficient electrical systems.
Routine inspections to identify wear and tear, such as checking circuit breakers and wiring.
Testing and replacing faulty components, like light fixtures or outlets.
Upgrading systems to meet current codes, for example, installing GFCI outlets in wet areas.
Performing preventive maintenance to avoid f...
- Q2. This company is good
- Q3. Electrica maintenance
- Q4. Dol stater ,R/F stater
Electrician Interview Questions asked at other Companies
Selected
Work related questions
(3 Questions)
- Q1. Technical work related questions
- Q2. Past back ground
- Ans.
I have a strong background in railway OHE engineering with experience in design, installation, and maintenance.
Experience in designing overhead electrification systems for railways
Knowledge of installation procedures and safety regulations
Experience in maintenance and troubleshooting of OHE systems
Familiarity with relevant software and tools such as AutoCAD and PLS-CADD
Strong understanding of electrical engineering pri
- Q3. Railway Electrification work knowledge
(2 Questions)
- Q1. Salary discuss and salary final
- Q2. Project site placement
Interview Preparation Tips
G R Infraprojects interview questions for popular designations
Selected
I was interviewed in Jan 2025.
(2 Questions)
- Q1. Beam lapping zone ,How many Beam zone
- Ans.
The number of beam lapping zones depends on the specific design and requirements of the project.
Beam lapping zones are typically determined based on structural requirements and load distribution.
The number of beam zones can vary based on factors such as beam size, material, and span length.
Consulting structural engineers and design specifications can help determine the appropriate number of beam lapping zones.
- Q2. What is over lap , What is confined zone VDF Flooring casting process
- Ans.
Overlap is the area where two VDF flooring sections meet, while confined zone is the area where the VDF flooring is contained during casting process.
Overlap is the junction between two VDF flooring sections, ensuring seamless connection.
Confined zone is the area where VDF flooring is poured and contained during casting process.
Properly managing overlap and confined zone is crucial for a successful VDF flooring installa
Interview Preparation Tips
Senior Engineer Interview Questions asked at other Companies
Get interview-ready with Top G R Infraprojects Interview Questions
I was interviewed before Mar 2024.
I am the supervisor of the lab assistants.
(1 Question)
- Q1. What is your work
Interview Preparation Tips
Quality Laboratory Assistant Interview Questions asked at other Companies
Jobs at G R Infraprojects
Selected
I applied via Referral and was interviewed in Sep 2024. There was 1 interview round.
(4 Questions)
- Q1. Steel Tensile strength testing
- Q2. Bitumen testing penetration test
- Q3. Aggregate Testing Soundness Testing
- Q4. Cement Consistency Testing
Senior Engineer In Quality Interview Questions asked at other Companies
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
(2 Questions)
- Q1. Electrician and working
- Q2. Maintenance ITI electrician workers
Interview Preparation Tips
Work ITI Electrician Working 7yars experience contact number XXXXX
ITI Electrician Interview Questions asked at other Companies
(5 Questions)
- Q1. Tell us about EOT proposal
- Ans.
EOT proposal is a request for an extension of time in a construction project due to delays beyond the contractor's control.
EOT stands for Extension of Time.
It is a formal request made by the contractor to the client or project owner.
The request is usually accompanied by supporting documentation such as delay analysis reports, weather reports, and other relevant evidence.
EOT proposals are typically reviewed by the proje...
- Q2. How to plan 2 lacs Cum concrete in 1 year. How many RMC to deploy for the same work.
- Ans.
To plan 2 lacs Cum concrete in 1 year, calculate daily production target and number of RMC plants needed.
Calculate daily production target by dividing total volume by number of working days in a year
Determine the capacity of each RMC plant and divide the daily production target by it to find out how many plants are needed
Consider factors like downtime, maintenance, and transportation in your planning
- Q3. Tell me about family background.
- Q4. How many company you have changed so far.
- Q5. Tell me about some silence features of your current project and cost.
Interview Preparation Tips
Assistant Manager Planning Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed in Jul 2024. There was 1 interview round.
(2 Questions)
- Q1. What is your expectations about company
- Ans.
I expect the company to provide opportunities for growth, a positive work environment, and clear communication.
Opportunities for career advancement
Positive work culture
Clear communication channels
- Q2. What is your previous salary
- Ans.
I prefer not to disclose my previous salary as I believe my value is based on my skills and experience.
It is not appropriate to discuss previous salary in an interview
Focus on discussing the value you can bring to the company
Emphasize your skills, experience, and qualifications instead of past salary
Interview Preparation Tips
Assistant Manager Interview Questions asked at other Companies
(2 Questions)
- Q1. Brief in QMS why it is adopted
- Ans.
QMS is adopted to ensure consistent quality, meet customer requirements, and improve processes.
Ensures consistent quality of products or services
Helps meet customer requirements and expectations
Improves processes and efficiency
Reduces risks and errors
Enhances customer satisfaction
Provides a framework for continuous improvement
- Q2. Design mix procedure
- Ans.
Design mix procedure involves determining the proportions of materials to create a concrete mix with desired properties.
Identify the required strength and durability of the concrete
Select suitable materials such as cement, aggregates, and water
Calculate the proportions of each material based on mix design methods
Test the mix to ensure it meets specifications
Adjust the mix if necessary to achieve desired properties
QA QC Engineer Interview Questions asked at other Companies
G R Infraprojects Interview FAQs
Some of the top questions asked at the G R Infraprojects interview -
The duration of G R Infraprojects interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
G R Infraprojects Interviews By Designations
- G R Infraprojects Senior Engineer Interview Questions
- G R Infraprojects Assistant Manager Interview Questions
- G R Infraprojects Structural Engineer Interview Questions
- G R Infraprojects Deputy Manager Interview Questions
- G R Infraprojects Senior Structural Engineer Interview Questions
- G R Infraprojects Civil Engineer Interview Questions
- G R Infraprojects Planning Manager Interview Questions
- G R Infraprojects Executive Interview Questions
- Show more
Interview Questions for Popular Designations
G R Infraprojects Interview Process
based on 157 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
G R Infraprojects Reviews and Ratings
based on 1.5k reviews
Rating in categories
|
Assistant Manager
389
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Senior Engineer
225
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Engineer
137
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Deputy Manager
125
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Structural Engineer
123
salaries
| ₹0 L/yr - ₹0 L/yr |
Nagarjuna Construction Company
PNC Infratech
Ashoka Buildcon
IRB Infrastructure
- Home >
- Interviews >
- G R Infraprojects Interview Questions
