Ashoka Buildcon Civil Site Supervisor Interview Questions and Answers

The thickness of a tile can vary depending on the type and size of the tile being used.

• Tile thickness typically ranges from 1/4 inch to 3/4 inch.

• Larger tiles may have a thicker thickness to support their weight.

• Thin tiles are often used for wall applications, while thicker tiles are used for flooring.

• Porcelain tiles are usually thicker than ceramic tiles.

The thickness of marble can vary depending on the type and purpose, but it is typically between 3/4 inch to 1 1/4 inches.

• Marble thickness can range from 3/4 inch to 1 1/4 inches

• Thicker marble is often used for countertops and flooring

• Thinner marble may be used for wall cladding or decorative purposes

The process of flooring involves selecting the appropriate materials, preparing the subfloor, laying the flooring material, and finishing with trim.

• Selecting the appropriate flooring material based on the location and usage (e.g. hardwood, laminate, tile, carpet)

• Preparing the subfloor by ensuring it is clean, level, and dry

• Laying the flooring material according to manufacturer's instructions, starting from the center o...read more

Types of tiles include ceramic, porcelain, glass, and natural stone. Cement ratio in tile installation varies depending on the type of tile and substrate.

• Types of tiles: ceramic, porcelain, glass, natural stone

• Cement ratio varies based on tile type and substrate

• Ceramic tiles typically require a 1:4 cement to water ratio for installation

• Porcelain tiles may need a 1:3 cement to water ratio for proper adhesion

Flooring process involves selecting materials, preparing the subfloor, installing the flooring, and finishing with trim.

• Selecting appropriate flooring material based on budget, durability, and aesthetics (e.g. hardwood, laminate, tile, carpet)

• Preparing the subfloor by ensuring it is clean, level, and dry before installation

• Installing the flooring by following manufacturer's instructions and using proper tools (e.g. adh...read more

The cement ratio for flooring depends on the type of flooring and the strength required.

• The typical cement ratio for standard concrete flooring is 1:2:4 (cement:sand:aggregate)

• For high strength flooring, the ratio can be increased to 1:1.5:3

• For decorative or polished concrete flooring, a lower water-cement ratio is used to achieve a smoother finish

The slope of stairs refers to the angle at which the stairs are inclined, affecting safety and accessibility.

• The slope of stairs is typically between 30-35 degrees for comfortable and safe use.

• Building codes may dictate specific slope requirements for stairs to ensure safety and accessibility.

• The slope of stairs can be calculated using trigonometry, with the rise and run of the stairs determining the angle.

• A steep slop...read more

Covering is provided in steel reinforcement to protect it from corrosion and to ensure proper bond with concrete.

• Covering protects steel reinforcement from corrosion caused by exposure to moisture and chemicals in the environment.

• It helps in maintaining the bond between steel reinforcement and concrete, ensuring structural integrity.

• Proper covering thickness is important to prevent rusting of steel bars and maintain du...read more

The leaping zone of steel reinforcement refers to the area where the steel bars are not provided in a concrete member.

• The leaping zone is typically found in beams and slabs where the steel reinforcement is not required to be continuous.

• It is important to ensure that the leaping zone does not compromise the structural integrity of the member.

• Proper detailing and design considerations are necessary to determine the exten...read more

Site uses materials can be identified through visual inspection, testing, and documentation.

• Conduct visual inspection of materials on site to identify their type and quality

• Perform tests on materials such as soil, concrete, and asphalt to determine their properties

• Review documentation such as material specifications, delivery receipts, and quality control reports

• Consult with suppliers and manufacturers to verify the au

A section of stairs case with reinforcement is a structural drawing showing the details of the stairs and the reinforcement bars used for strength.

• Include dimensions and materials used for the stairs and reinforcement bars

• Show the arrangement of reinforcement bars in the section view

• Label the different components of the stairs case for clarity

Maivan technology consists of various components including sensors, software, and data analytics for monitoring and managing civil infrastructure.

• Sensors are used to collect data on various parameters such as temperature, humidity, and structural integrity.

• Software is utilized to process the data collected by sensors and provide real-time monitoring and analysis.

• Data analytics tools are employed to identify patterns, t...read more