Upload Button Icon Add office photos

Neel Metal Products

Compare button icon Compare button icon Compare

Filter interviews by

Neel Metal Products Implementation Engineer Interview Questions and Answers

Updated 7 Jun 2022

Neel Metal Products Implementation Engineer Interview Experiences

1 interview found

Round 1 - Technical 

(4 Questions)

  • Q1. What is the SI unit of current?
  • Ans. Ampere
  • Answered Anonymously
  • Q2. What is the density of water?
  • Ans. 

    The density of water is approximately 1 gram per cubic centimeter.

    • The density of water is a physical property that describes the mass of water per unit volume.

    • It is commonly measured in grams per cubic centimeter (g/cm³) or kilograms per liter (kg/L).

    • The density of water is influenced by temperature and pressure.

    • At 4 degrees Celsius, the density of water is exactly 1 g/cm³.

    • Water is unique because its maximum density oc...

  • Answered by AI
  • Q3. What is the range of mercury thermometer?
  • Ans. 

    The range of a mercury thermometer is typically -40°C to 500°C.

    • The lower limit of the range is usually -40°C.

    • The upper limit of the range is typically 500°C.

    • Mercury thermometers are commonly used in various industries and laboratories.

    • They are not suitable for measuring temperatures below -40°C or above 500°C.

  • Answered by AI
  • Q4. What is the principle of c type burdon tube?
  • Ans. 

    C type bourdon tube is a mechanical pressure sensing element used in pressure gauges and switches.

    • It is a curved tube that straightens under pressure, causing a pointer to move on a calibrated scale.

    • It is made of a metal alloy, typically brass or bronze.

    • It is commonly used in industrial applications to measure pressure in pipes and tanks.

    • It is named after its inventor, Eugene Bourdon.

    • It is sensitive to changes in tempe...

  • Answered by AI
Round 2 - Assignment 

Interview Preparation Tips

Topics to prepare for Neel Metal Products Implementation Engineer interview:
  • That will give me a opportunity.
  • Communication Skills
  • Lecturer Activities
  • Quality
Interview preparation tips for other job seekers - I will work responsibility and honestly

Top trending discussions

View All
Interview Tips & Stories
5d (edited)
a team lead
Why are women still asked such personal questions in interview?
I recently went for an interview… and honestly, m still trying to process what just happened. Instead of being asked about my skills, experience, or how I could add value to the company… the questions took a totally unexpected turn. The interviewer started asking things like When are you getting married? Are you engaged? And m sure, if I had said I was married, the next question would’ve been How long have you been married? What does my personal life have to do with the job m applying for? This is where I felt the gender discrimination hit hard. These types of questions are so casually thrown at women during interviews but are they ever asked to men? No one asks male candidates if they’re planning a wedding or how old their kids are. So why is it okay to ask women? Can we please stop normalising this kind of behaviour in interviews? Our careers shouldn’t be judged by our relationship status. Period.
Got a question about Neel Metal Products?
Ask anonymously on communities.

Interview questions from similar companies

I applied via Job Fair

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. All questions related to foundry
  • Q2. And machine shop and patterns making

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company to learn process of plant and production.

Implementation Engineer Interview Questions Asked at Other Companies

Q1. What is the SI unit of current?
Q2. What is the range of a mercury thermometer?
Q3. What is the principle of a C-type Bourdon tube?
Q4. What is the difference between a clustered and a non-clustered in ... read more
Q5. What is the density of water?
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Apr 2024, where I was asked the following questions.

  • Q1. What is the process involved in operating a molding machine?
  • Ans. 

    Operating a molding machine involves setup, operation, monitoring, and maintenance to produce quality molded products.

    • Setup: Prepare the machine by selecting the appropriate mold and material, e.g., plastic or metal.

    • Heating: Preheat the machine to the required temperature for the material being used.

    • Injection: Inject the molten material into the mold under high pressure.

    • Cooling: Allow the material to cool and solidify ...

  • Answered by AI
  • Q2. What is the process for conducting quality checks?
  • Ans. 

    Quality checks ensure products meet standards through systematic evaluation and testing.

    • Define quality criteria based on project requirements and industry standards.

    • Develop a quality assurance plan outlining the methods and tools for checks.

    • Conduct inspections at various stages of production, such as pre-production, in-process, and post-production.

    • Utilize automated testing tools for software to ensure functionality and...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Yourself experiance family related
Round 2 - Technical 

(1 Question)

  • Q1. Technical related
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Recruitment Consulltant

Round 1 - Assignment 

Logistic Analysis & previous projects

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - HR 

(5 Questions)

  • Q1. About self, Statutory compliance, Administration activities,payroll Activities, employee engagement etc
  • Q2. Epf and esic acts
  • Q3. Payroll processing
  • Q4. Canteen and Administration
  • Q5. Labour licence and Other Licence
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jun 2023. There were 3 interview rounds.

Round 1 - Group Discussion 

Quality Checking process

Round 2 - Technical 

(1 Question)

  • Q1. Power Plant Related
Round 3 - HR 

(1 Question)

  • Q1. Personal Details
Are these interview questions helpful?
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What are 7 QC Tools
  • Ans. 

    The 7 QC Tools are a set of basic tools used for quality control and problem-solving in manufacturing and other industries.

    • Check sheet: Used to collect and analyze data in a systematic manner.

    • Histogram: A visual representation of data distribution.

    • Pareto chart: Helps identify the most significant factors contributing to a problem.

    • Cause-and-effect diagram (Fishbone diagram): Used to identify and analyze potential causes...

  • Answered by AI
  • Q2. How to handle customer complaint
  • Ans. 

    Handle customer complaints by listening, empathizing, investigating, resolving, and following up.

    • Listen to the customer's complaint without interrupting

    • Empathize with the customer's situation and show understanding

    • Investigate the root cause of the complaint to prevent future occurrences

    • Resolve the issue promptly and effectively

    • Follow up with the customer to ensure satisfaction and prevent recurrence

  • Answered by AI
  • Q3. What is GD and T
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.

    • GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

    • It helps ensure that parts fit together properly and function as intended.

    • GD&T includes symbols, such as concentricity, flatness, perpendicularity, and position, to co...

  • Answered by AI
  • Q4. What are 5 core tools of Quality
  • Ans. 

    The 5 core tools of Quality are essential techniques used in quality management to ensure products and processes meet standards.

    • 1. Process Flowcharts: Used to visually represent the steps in a process.

    • 2. Cause and Effect Diagrams (Fishbone Diagrams): Used to identify and analyze potential causes of a problem.

    • 3. Control Charts: Used to monitor process variation over time.

    • 4. Check Sheets: Used to collect and analyze data...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Crescent Foundry Quality Engineer interview:
  • Quality Assurance
  • Quality Control

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is rolling ?
  • Ans. 

    Rolling is a metal forming process in which a metal stock is passed through one or more pairs of rolls to reduce thickness and to make the thickness uniform.

    • Rolling is a metal forming process used to shape and reduce the thickness of metal stock.

    • It involves passing the metal through pairs of rolls that exert pressure to deform the metal.

    • Rolling can be hot rolling (done above the recrystallization temperature of the met...

  • Answered by AI
  • Q2. Tensile test procedure?
  • Ans. 

    Tensile test procedure involves applying a controlled tension force to a material sample to determine its mechanical properties.

    • Prepare the test specimen according to standards such as ASTM or ISO.

    • Secure the specimen in the testing machine grips.

    • Apply a gradually increasing tensile force until the specimen fractures.

    • Measure and record the force applied and the corresponding elongation of the specimen.

    • Calculate the tens...

  • Answered by AI
  • Q3. 3)Rolling process?
  • Ans. 

    The rolling process is a metal forming technique that reduces material thickness through deformation between rollers.

    • Involves passing metal stock through a pair of rolls to reduce thickness.

    • Commonly used for producing sheets, plates, and structural shapes.

    • Hot rolling occurs above the material's recrystallization temperature, while cold rolling is done at room temperature.

    • Examples include steel sheets for automotive man...

  • Answered by AI
  • Q4. 4)Metarial defect any questions?
  • Q5. 5)slit cutting and processing?

Interview Preparation Tips

Interview preparation tips for other job seekers - I am metallurgycal Engineer .I have 7 years of experience.H.S.M rolling mill
has experience.willing to work for a good opportunity.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Why have you left your previous organization
  • Ans. For career growth and better benefits
  • Answered Anonymously
  • Q2. Tell about your experience & skill
  • Ans. Mention the experience you have gained previously and skill required for the post u are applying
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Discuss from Ur known experienced professional before giving the interview

Neel Metal Products Interview FAQs

How many rounds are there in Neel Metal Products Implementation Engineer interview?
Neel Metal Products interview process usually has 2 rounds. The most common rounds in the Neel Metal Products interview process are Technical and Assignment.
What are the top questions asked in Neel Metal Products Implementation Engineer interview?

Some of the top questions asked at the Neel Metal Products Implementation Engineer interview -

  1. What is the SI unit of curre...read more
  2. What is the range of mercury thermomet...read more
  3. What is the principle of c type burdon tu...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Super Smelters Interview Questions
3.9
 • 37 Interviews
Gravita Interview Questions
4.2
 • 23 Interviews
Toyota Tsusho Interview Questions
3.9
 • 15 Interviews
View all
Assistant Manager
199 salaries
unlock blur

₹5.1 L/yr - ₹12 L/yr

Executive
195 salaries
unlock blur

₹2.5 L/yr - ₹6.5 L/yr

Senior Executive
185 salaries
unlock blur

₹3.5 L/yr - ₹8 L/yr

Deputy Manager
82 salaries
unlock blur

₹8 L/yr - ₹13.8 L/yr

Senior Engineer
49 salaries
unlock blur

₹4 L/yr - ₹7.5 L/yr

Explore more salaries
Compare Neel Metal Products with

Super Smelters

3.9
Compare

Ashapura Group Of Industries

4.1
Compare

TRL Krosaki Refractories

3.8
Compare

MN Dastur & Company

4.2
Compare
write
Share an Interview