Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Hindustan Unilever Mechanical Engineer Interview Questions and Answers

Updated 24 Jan 2025

Hindustan Unilever Mechanical Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What is vice what is gauge what is file how many types of file
  • Ans. 

    Vice, gauge, and file are common tools used in mechanical engineering.

    • Vice is a mechanical device used to hold workpieces securely in place during machining or assembly.

    • Gauge is a tool used for measuring dimensions or checking the accuracy of machined parts.

    • File is a tool used for removing material by abrasion, typically used for smoothing or shaping workpieces.

    • There are several types of files including flat, round, ha

  • Answered by AI
  • Q2. What is Hacking how many types of hacksaw what is use deep hacksaw
  • Ans. 

    Hacking is the process of cutting or shaping materials using a hacksaw. There are different types of hacksaws for various purposes, including deep hacksaws for cutting thick materials.

    • Hacking is the process of cutting or shaping materials using a hacksaw

    • Types of hacksaws include junior hacksaw, coping saw, and power hacksaw

    • Deep hacksaws are used for cutting thick materials like metal pipes or rods

  • Answered by AI
  • Q3. What is punch type of punch what is safety how many types of safety
  • Ans. 

    A punch is a tool used to create holes or indentations in materials. Safety measures are important to prevent accidents. There are various types of safety measures.

    • A punch is a hand tool with a sharp end used to create holes in materials like metal or leather.

    • Types of punches include center punch, pin punch, and drive punch.

    • Safety measures when using punches include wearing safety goggles, using proper technique, and s...

  • Answered by AI
Round 2 - family details 

(2 Questions)

  • Q1. Ghar ma kitna mamber
  • Q2. Father kaya kaam karta hai

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: It was based on CGPA and Tech projects
Tips: Ensure you have explained your tech projects well

Round: Group Discussion
Experience: A very good panel. A lot of good points were raised.
Tips: Make sure you raise your points well
Duration: 20 minutes

Round: Technical Interview
Experience: Tried to test the basics of almost everything that we have studied.

General Tips: Be confident throughout the process. That helps a lot.
Skill Tips: Brush up your courses
Skills: Engineering Knowledge
Duration: 2
College Name: IIT Madras
Motivation: The fact that the role is going to be techno-managerial. Also, the compensation.

Mechanical Engineer Interview Questions Asked at Other Companies

Q1. What we need to do if pressure valve fail in boiler
Q2. What are the basic parts of an aeroplane and there working functi ... read more
asked in Tata Steel
Q3. Percentage of carbon presence in cast iron
Q4. How we cool a pipe in a chamber without using coolent
Q5. Why petrol engines comparison ratio low when compared to a diesel ... read more

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Jun 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Regarding your qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice , the person should be all rounder
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Job Portal and was interviewed before Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Yes I am interview
  • Q2. Yes I am mechanical engineer production engineer interview
  • Q3. Mechanical engineer production engineer interview
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jul 2023. There were 2 interview rounds.

Round 1 - Case Study 

How to handle emergency.

Round 2 - Technical 

(2 Questions)

  • Q1. Boiler light up sop
  • Q2. Turbine rolling procedure
  • Ans. 

    Turbine rolling procedure involves carefully starting and stopping the turbine to prevent damage.

    • Ensure proper lubrication of bearings before starting the turbine.

    • Gradually increase the speed of the turbine to prevent sudden stress on the components.

    • Monitor temperature and vibration levels during the rolling procedure.

    • Follow manufacturer's guidelines for specific turbine rolling procedures.

    • Perform regular maintenance c

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell about your self
  • Ans. 

    Experienced Senior Engineer with a strong background in software development and project management.

    • Over 10 years of experience in software engineering

    • Expertise in Java, Python, and C++ programming languages

    • Managed multiple projects from conception to completion

    • Strong problem-solving and analytical skills

    • Excellent communication and leadership abilities

  • Answered by AI
  • Q2. Tell about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Proficient in various programming languages such as Java, Python, and C++

    • Strong problem-solving skills demonstrated through successful project completions

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jun 2020. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How to Find Centre of a Circle?
  • Q2. What is Types of Maintenance ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep updated new Maintenance Procedure.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. About the operation of Boiler
  • Q2. About the operation of turbines
  • Q3. About plant efficiency
Round 3 - HR 

(2 Questions)

  • Q1. Salory structure
  • Q2. Family background

Interview Preparation Tips

Interview preparation tips for other job seekers - Go for the power plant basics
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Feb 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Aptitude Test 

Aptitude test, in this provide question paper up to 45questions in 30minutes

Round 3 - Assignment 

Assignment about technically, technical question ask in this case

Round 4 - HR 

(5 Questions)

  • Q1. Ready to relocate and family background
  • Ans. 

    Yes, I am ready to relocate and have a supportive family background.

    • I am open to relocating for the right opportunity

    • My family is supportive and understands the demands of my profession

    • I have previously relocated for my education or job

    • I am adaptable and can easily settle in a new location

  • Answered by AI
  • Q2. Further study and other bond process in this ask
  • Q3. Do you want further study
  • Ans. 

    Yes, I am interested in further study to enhance my knowledge and skills as a Mechanical Engineer.

    • Continuing education can help me stay updated with the latest advancements in the field.

    • Further study can provide me with specialized knowledge in specific areas of mechanical engineering.

    • Advanced degrees or certifications can improve my career prospects and increase my earning potential.

    • Research opportunities during furth...

  • Answered by AI
  • Q4. Which department do you like
  • Ans. 

    I enjoy working in the Research and Development department.

    • I am passionate about innovation and problem-solving, which are key aspects of the R&D department.

    • I enjoy collaborating with a team of engineers and scientists to develop new technologies and improve existing ones.

    • I appreciate the opportunity to work on cutting-edge projects and contribute to advancements in the field.

    • For example, during my internship, I worked...

  • Answered by AI
  • Q5. Interested subject and knowing

Interview Preparation Tips

Topics to prepare for ITC Mechanical Engineer interview:
  • Maintenance
Interview preparation tips for other job seekers - Learn skills and other things about jobs
This is learning process
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What are you doing work
  • Ans. 

    I am responsible for designing, analyzing, and improving mechanical systems and components.

    • Designing mechanical systems and components

    • Analyzing performance of existing systems

    • Improving efficiency and functionality of mechanical components

    • Collaborating with team members to solve engineering challenges

  • Answered by AI
  • Q2. Machine maintenance
Round 2 - HR 

(1 Question)

  • Q1. How to plan maintenance
  • Ans. 

    Maintenance planning involves scheduling regular inspections, identifying potential issues, prioritizing tasks, and allocating resources efficiently.

    • Create a maintenance schedule based on equipment manufacturer recommendations

    • Conduct regular inspections to identify potential issues before they become major problems

    • Prioritize maintenance tasks based on criticality and impact on production

    • Allocate resources such as manpo...

  • Answered by AI
Contribute & help others!
anonymous
You can choose to be anonymous

Hindustan Unilever Interview FAQs

How many rounds are there in Hindustan Unilever Mechanical Engineer interview?
Hindustan Unilever interview process usually has 2 rounds. The most common rounds in the Hindustan Unilever interview process are Technical.
What are the top questions asked in Hindustan Unilever Mechanical Engineer interview?

Some of the top questions asked at the Hindustan Unilever Mechanical Engineer interview -

  1. what is vice what is gauge what is file how many types of f...read more
  2. what is Hacking how many types of hacksaw what is use deep hack...read more
  3. what is punch type of punch what is safety how many types of saf...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

SALARIES

Aparna Constructions and Estates

SALARIES

ICICI Prudential Life Insurance

REVIEWS

Aparna Constructions and Estates

No Reviews

REVIEWS

Aparna Constructions and Estates

No Reviews

SALARIES

ICICI Prudential Life Insurance

REVIEWS

Amazon Development Centre India

No Reviews

REVIEWS

Amazon Development Centre India

No Reviews

REVIEWS

Amazon Development Centre India

No Reviews

Tell us how to improve this page.

Hindustan Unilever Mechanical Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

ITC Interview Questions
3.9
 • 545 Interviews
Dabur Interview Questions
4.0
 • 269 Interviews
Nestle Interview Questions
3.9
 • 233 Interviews
RSPL Group Interview Questions
4.1
 • 186 Interviews
Britannia Interview Questions
4.0
 • 164 Interviews
DS Group Interview Questions
4.1
 • 145 Interviews
Amul India Interview Questions
4.1
 • 123 Interviews
Procter & Gamble Interview Questions
4.2
 • 114 Interviews
View all
Hindustan Unilever Mechanical Engineer Salary
based on 16 salaries
₹1.2 L/yr - ₹6 L/yr
8% less than the average Mechanical Engineer Salary in India
View more details

Hindustan Unilever Mechanical Engineer Reviews and Ratings

based on 4 reviews

3.7/5

Rating in categories

2.3

Skill development

1.9

Work-life balance

4.5

Salary

4.5

Job security

4.5

Company culture

1.9

Promotions

2.3

Work satisfaction

Explore 4 Reviews and Ratings
Teritory Sales Officer
935 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
736 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Executive
471 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Marketing Executive
384 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Key Accounts Executive
324 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Hindustan Unilever with

ITC

3.9
Compare

Procter & Gamble

4.1
Compare

Nestle

3.9
Compare

Colgate Palmolive

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview