Filter interviews by
I applied via Recruitment Consultant and was interviewed in Jan 2020. There were 3 interview rounds.
I will consider the purpose, size, location, budget, safety, accessibility, and sustainability while designing the facility.
Identify the purpose of the facility
Determine the size and location based on the purpose and target audience
Allocate budget for construction, equipment, and maintenance
Ensure safety measures are in place for employees and visitors
Make the facility accessible for people with disabilities
Incorporate...
Tunnel zone differential pressure refers to the pressure difference between different zones in a tunnel.
Tunnel zone differential pressure is important for maintaining proper ventilation and air flow in tunnels.
It is measured using pressure sensors installed in different zones of the tunnel.
The limits for tunnel zone differential pressure depend on the specific tunnel and its ventilation requirements.
Excessive different...
The water consumption in one vial washing cycle varies depending on the specific washing machine and cycle settings.
Water consumption can range from a few milliliters to several liters per cycle.
Factors that influence water consumption include the size and type of vials being washed, the washing machine's capacity, and the cycle duration.
For example, a small vial washing machine may use around 100 milliliters of water ...
Block capacity is calculated by multiplying the length, width, and height of the block.
Measure the length, width, and height of the block
Multiply the length, width, and height together
The resulting number is the block capacity
I will take corrective actions to bring the conductivity within the limit.
Stop the water system and investigate the root cause of the high conductivity
Check the calibration of the conductivity meter
Inspect the water purification system for any malfunctioning components
Take appropriate corrective actions to bring the conductivity within the limit
Re-test the water to ensure it meets the required specifications
Heat load is calculated by considering factors such as the size of the space, insulation, and equipment used.
Determine the size of the space in square feet
Determine the insulation type and thickness
Identify the equipment used and its power consumption
Calculate the heat generated by occupants and lighting
Add up all the factors to determine the total heat load
I will reduce breakdown by implementing preventive maintenance and regular inspections.
Implementing a preventive maintenance program
Regular inspections of equipment and machinery
Training employees on proper use and maintenance of equipment
Using high-quality parts and materials
Monitoring equipment performance and addressing issues promptly
I will consider manufacturer's recommendations, equipment usage, and maintenance history to decide PM schedule.
Review manufacturer's recommendations for maintenance schedule
Consider equipment usage and workload
Analyze maintenance history and identify any recurring issues
Consult with maintenance team and other stakeholders
Create a PM schedule that balances maintenance needs with operational requirements
I applied via Company Website and was interviewed in Aug 2024. There were 2 interview rounds.
Synthesis of knoeve agel product using piperidine catalyst
Numerical reasoning, logical reasoning,
I applied via Referral and was interviewed in Mar 2024. There was 1 interview round.
I have performed troubleshooting by identifying root causes, analyzing data, and implementing solutions.
Identifying root causes of formulation issues
Analyzing data to determine potential solutions
Implementing corrective actions to resolve issues
Collaborating with cross-functional teams to troubleshoot complex problems
To prepare a 10% coating solution of 100 gm, 90 gm of solvent will be required.
To prepare a 10% coating solution, the solvent will make up 90% of the total solution.
Therefore, for 100 gm of solution, 90 gm will be solvent and 10 gm will be the coating material.
The quantity of solvent needed will be 90 gm.
Yes, I have worked on a product with elemental impurities and resolved the issue through thorough testing and analysis.
Identified potential sources of elemental impurities in the product
Conducted risk assessment to determine the impact on product quality and safety
Developed a strategy to control and monitor elemental impurities levels
Utilized analytical techniques such as ICP-MS to quantify elemental impurities
Implemen...
I applied via Campus Placement
It was easy topic was - Media
Easy to do test no preparation required
MIS stands for Management Information System, it is a system that helps organizations make informed decisions by providing relevant data and reports.
MIS collects, processes, stores, and distributes information to support decision-making in an organization
It helps in analyzing data to identify trends, patterns, and insights for strategic planning
MIS can include software systems, databases, and hardware to manage informa...
Emcure Pharmaceuticals interview questions for popular designations
Get interview-ready with Top Emcure Pharmaceuticals Interview Questions
I applied via Referral and was interviewed in Feb 2024. There were 3 interview rounds.
I am passionate about making a positive impact in the field and enjoy the challenges it presents.
Passion for making a positive impact
Enjoyment of challenges in the field
Interest in continuous learning and growth
My future goal is to obtain a certification in project management to enhance my skills and advance my career.
Obtain certification in project management
Enhance skills and knowledge in project management
Advance career opportunities
Stay updated with industry trends and best practices
I was interviewed in Aug 2024.
In my previous company, I used a variety of equipment including industrial mixers, conveyors, and packaging machines.
Industrial mixers for blending ingredients efficiently
Conveyors for transporting materials between production stages
Packaging machines for packaging finished products
Quality control equipment for ensuring product standards
I applied via Approached by Company and was interviewed in Jan 2024. There was 1 interview round.
Developing company and brand value involves aligning business practices with core values, creating a strong brand identity, and consistently delivering on promises.
Align business practices with core values to ensure consistency and authenticity
Create a strong brand identity through consistent messaging, visual elements, and customer experience
Consistently deliver on promises to build trust and loyalty among customers a
Increasing company wealth and good practice management involves strategic planning, efficient operations, and effective leadership.
Implement cost-saving measures such as reducing waste and optimizing inventory
Focus on customer satisfaction to increase sales and repeat business
Invest in employee training and development to improve productivity and morale
Utilize data analytics to make informed decisions and identify area
I applied via Approached by Company and was interviewed in Nov 2023. There were 4 interview rounds.
I applied via Walk-in and was interviewed in Apr 2024. There was 1 interview round.
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
General knowledge, group discussion
Top trending discussions
Some of the top questions asked at the Emcure Pharmaceuticals interview -
The duration of Emcure Pharmaceuticals interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 81 interviews
Interview experience
based on 1.9k reviews
Rating in categories
Officer
647
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive
492
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
327
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Officer
231
salaries
| ₹0 L/yr - ₹0 L/yr |
Territory Manager
213
salaries
| ₹0 L/yr - ₹0 L/yr |
Sun Pharmaceutical Industries
Cipla
DRJ & CO
Biocon Limited