Upload Button Icon Add office photos

Filter interviews by

Allygram Systems and Technologies Design Engineer Interview Questions and Answers

Updated 13 Mar 2022

Allygram Systems and Technologies Design Engineer Interview Experiences

1 interview found

I applied via Referral and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Design Test 

(1 Question)

  • Q1. Small part was given along with section and you will need to complete the CAD model within 90minutes
Round 3 - Technical 

(1 Question)

  • Q1. Draw sections of last worked projects, plastic defects, bending moment diagrams of beams,gd &t symbols
  • Ans. 

    I am proficient in drawing sections of projects, identifying plastic defects, and creating bending moment diagrams of beams. I am also familiar with GD&T symbols.

    • I can draw sections of projects to show different layers and components

    • I can identify plastic defects such as warping, sink marks, and flash

    • I can create bending moment diagrams of beams to show the distribution of forces

    • I am familiar with GD&T symbols and can ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Concentrate on your last worked projects, plastic material properties and defects, SoM subject basic question.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Jul 2023.

Round 1 - Assignment 

Connection design based questions

Round 2 - One-on-one 

(2 Questions)

  • Q1. Shear force and bending moment
  • Q2. Connection design basics

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

I applied via Referral and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Technical interviews details lead for sharing technical

Round 3 - One-on-one 

(2 Questions)

  • Q1. Previous company adding technical round
  • Q2. Welding details piping product development sheetmetal. GD & T material specification.

Interview Preparation Tips

Interview preparation tips for other job seekers - As Design Engineer technical and HR round. Working as independent

I applied via Referral and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Group Discussion 

Past work experience, trainings etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Do Swot analysis of your skills and highlight Strengths. softly mention weakness and action plan to overcome it.

Interview Questionnaire 

2 Questions

  • Q1. What is types of design
  • Ans. 

    Types of design include graphic design, product design, interior design, fashion design, and web design.

    • Graphic design involves creating visual content for print or digital media

    • Product design involves designing physical products for manufacturing

    • Interior design involves designing spaces for functionality and aesthetics

    • Fashion design involves creating clothing and accessories

    • Web design involves designing websites for u

  • Answered by AI
  • Q2. Different types of design
  • Ans. 

    There are various types of design such as graphic design, product design, interior design, fashion design, etc.

    • Graphic design - designing visual content for print or digital media

    • Product design - designing physical products for mass production

    • Interior design - designing interior spaces for functionality and aesthetics

    • Fashion design - designing clothing and accessories

    • Web design - designing websites for user experience

  • Answered by AI

Skills evaluated in this interview

I applied via Recruitment Consultant and was interviewed in Nov 2017. There was 0 interview round.

Interview Preparation Tips

General Tips: At the time of interview give positive attitude.
Writte valid data in CV which you exactly know.
Prepare yourself as per you resume.
Skills: Engineering Knowledge, Body Language, Problem Solving, Time Management
Duration: >3 Months
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Jul 2023.

Round 1 - Assignment 

Connection design based questions

Round 2 - One-on-one 

(2 Questions)

  • Q1. Shear force and bending moment
  • Q2. Connection design basics

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

Interview Questionnaire 

2 Questions

  • Q1. For fresher - About acedemic project
  • Q2. Sfd bmd pressure diagram retaining wall

Interview Preparation Tips

Round: Test
Experience: Aptitude

Round: Test
Experience: Subjectwise questions civil

I applied via Referral and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

Past work experience, trainings etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Do Swot analysis of your skills and highlight Strengths. softly mention weakness and action plan to overcome it.
Interview experience
1
Bad
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Previous work everything in detail.
Round 3 - Tool test 

(1 Question)

  • Q1. Catia modeling for sheet metal part
  • Ans. 

    Catia is a powerful tool for modeling sheet metal parts, allowing for precise design and manufacturing.

    • Catia offers specific tools and features for sheet metal design, such as bend tables and unfolding capabilities.

    • Users can create accurate flat patterns for manufacturing by utilizing Catia's sheet metal design functions.

    • Catia allows for the simulation of sheet metal forming processes to ensure the design meets manufac

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Design related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - They just ask you questions like as they think they do rocket science 🤣.
When you clear 2 technical rounds of 1 hour each they say you are technically sound.
When you ask for proper salary package then they say you are technically weak.
If you can't give proper package they say that thing to candidate 🙏

Skills evaluated in this interview

Allygram Systems and Technologies Interview FAQs

How many rounds are there in Allygram Systems and Technologies Design Engineer interview?
Allygram Systems and Technologies interview process usually has 3 rounds. The most common rounds in the Allygram Systems and Technologies interview process are Resume Shortlist, Design Test and Technical.
How to prepare for Allygram Systems and Technologies Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Allygram Systems and Technologies. The most common topics and skills that interviewers at Allygram Systems and Technologies expect are 3D Modeling, Assembly, CATIA, Casting and Checking Fixtures.
What are the top questions asked in Allygram Systems and Technologies Design Engineer interview?

Some of the top questions asked at the Allygram Systems and Technologies Design Engineer interview -

  1. Draw sections of last worked projects, plastic defects, bending moment diagrams...read more
  2. Small part was given along with section and you will need to complete the CAD m...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Allygram Systems and Technologies interview
Referral
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
Allygram Systems and Technologies Design Engineer Salary
based on 72 salaries
₹3.6 L/yr - ₹9.7 L/yr
43% more than the average Design Engineer Salary in India
View more details

Allygram Systems and Technologies Design Engineer Reviews and Ratings

based on 12 reviews

2.5/5

Rating in categories

2.2

Skill development

2.4

Work-Life balance

2.7

Salary & Benefits

2.1

Job Security

2.4

Company culture

2.6

Promotions/Appraisal

2.1

Work Satisfaction

Explore 12 Reviews and Ratings
Design Engineer
72 salaries
unlock blur

₹3.6 L/yr - ₹9.6 L/yr

Senior Design Engineer
26 salaries
unlock blur

₹6.4 L/yr - ₹13 L/yr

CAD Engg
9 salaries
unlock blur

₹3.1 L/yr - ₹4.7 L/yr

Product Engineer
7 salaries
unlock blur

₹8 L/yr - ₹15.3 L/yr

Plm Support Engineer
6 salaries
unlock blur

₹5 L/yr - ₹7 L/yr

Explore more salaries
Compare Allygram Systems and Technologies with

TCS

3.7
Compare

Infosys

3.7
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview