AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Citec Engineering Interview Questions, Process, and Tips
Top Citec Engineering Interview Questions and Answers
- Q1. What are the MOC of utility lines with gradeasked in Piping Engineer interview
- Q2. sfd and bmd diagram for beams and framesasked in Civil Structural Engineer interview
- Q3. Catia modeling for sheet metal partasked in Senior Design Engineer interview
Citec Engineering Interview Experiences
6 interviews found
I applied via LinkedIn and was interviewed in Jun 2023. There were 3 interview rounds.
(2 Questions)
- Q1. What are the MOC of utility lines with grade
- Ans.
MOC of utility lines with grade refers to the material of construction suitable for different grades of utility lines.
MOC for utility lines with grade depends on factors like temperature, pressure, and type of fluid being transported.
Common materials used for utility lines include carbon steel, stainless steel, copper, and PVC.
Higher grades may require materials with better corrosion resistance and mechanical propertie...
- Q2. What are types of fittings
- Ans.
Types of fittings include elbows, tees, reducers, couplings, and flanges.
Elbows: used to change the direction of the pipe
Tees: used to create a branch in the pipeline
Reducers: used to connect pipes of different sizes
Couplings: used to connect two pipes together
Flanges: used to connect pipes, valves, and other equipment
(2 Questions)
- Q1. What’s manufacturing methods of pipe
- Ans.
Manufacturing methods of pipes include seamless, welded, and extruded processes.
Seamless pipes are made by piercing a solid billet of metal and then rolling it to form a hollow tube.
Welded pipes are made by welding together two ends of a metal strip or plate to form a tube.
Extruded pipes are made by forcing a metal billet through a die to create the desired shape and size.
Other methods include spiral welding, longitudi
- Q2. What are types of flanges
- Ans.
Types of flanges include weld neck, slip-on, socket weld, lap joint, threaded, blind, and spectacle blind.
Weld neck flange: used for high pressure applications
Slip-on flange: easy to align and install
Socket weld flange: for small bore piping
Lap joint flange: used with stub end fittings
Threaded flange: for low pressure applications
Blind flange: used to close off piping systems
Spectacle blind flange: used in piping syste...
Piping Engineer Interview Questions asked at other Companies
I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 4 interview rounds.
(1 Question)
- Q1. Previous work everything in detail.
(1 Question)
- Q1. Catia modeling for sheet metal part
- Ans.
Catia is a powerful tool for modeling sheet metal parts, allowing for precise design and manufacturing.
Catia offers specific tools and features for sheet metal design, such as bend tables and unfolding capabilities.
Users can create accurate flat patterns for manufacturing by utilizing Catia's sheet metal design functions.
Catia allows for the simulation of sheet metal forming processes to ensure the design meets manufac
(1 Question)
- Q1. Design related questions
Interview Preparation Tips
When you clear 2 technical rounds of 1 hour each they say you are technically sound.
When you ask for proper salary package then they say you are technically weak.
If you can't give proper package they say that thing to candidate 🙏
Skills evaluated in this interview
Senior Design Engineer Interview Questions asked at other Companies
Aptitude and basic structural knowledge
(3 Questions)
- Q1. Basically they select candidates partially seeing their native place, reference and unfortunately religion and caste also is seen
- Q2. Loads acting upon piperack
- Ans.
Loads acting upon piperack include dead loads, live loads, wind loads, and seismic loads.
Dead loads are the permanent loads from the weight of the structure itself and any permanent equipment or fixtures.
Live loads are temporary loads from the weight of people, equipment, or materials on the piperack.
Wind loads are forces exerted by wind on the structure, which can vary based on the location and design of the piperack.
...
- Q3. Sfd and bmd diagram for beams and frames
- Ans.
SFD (Shear Force Diagram) and BMD (Bending Moment Diagram) show the variation of shear force and bending moment along the length of a beam or frame.
SFD shows the variation of shear force along the length of a beam or frame.
BMD shows the variation of bending moment along the length of a beam or frame.
SFD and BMD are essential for analyzing the internal forces and moments in a structure.
The diagrams help in determining t...
Civil Structural Engineer Interview Questions asked at other Companies
(1 Question)
- Q1. Job profile , work experience, achievements
(2 Questions)
- Q1. Salary discussion, what was my expected salary
- Q2. Notice period , how soon i can join
Interview Preparation Tips
HR Consultant Interview Questions asked at other Companies
Citec Engineering interview questions for popular designations
I applied via Referral and was interviewed in Mar 2022. There were 3 interview rounds.
Technical interviews details lead for sharing technical
(2 Questions)
- Q1. Previous company adding technical round
- Q2. Welding details piping product development sheetmetal. GD & T material specification.
Interview Preparation Tips
Design Engineer Interview Questions asked at other Companies
Interview QuestionnaireÂ
2 Questions
- Q1. For fresher - About acedemic project
- Q2. Sfd bmd pressure diagram retaining wall
Interview Preparation Tips
Experience: Aptitude
Round: Test
Experience: Subjectwise questions civil
Design Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Graduate Electrical Engineer Interview Questions & Answers
Burohappold Engineering
Anonymous
posted on 26 Oct 2024
I applied via campus placement at SRM Institute of Science & Technology, Chennai and was interviewed in Sep 2024. There was 1 interview round.
(6 Questions)
- Q1. TYPES OF STARTERS
- Ans.
Starters are devices used to start and control the speed of induction motors.
Direct On-Line (DOL) starter: provides full voltage to the motor at start
Star-Delta starter: reduces the starting current by initially connecting the motor in star configuration
Auto-transformer starter: uses an auto-transformer to reduce the voltage during starting
Soft starter: gradually increases the voltage to the motor to reduce starting cu...
- Q2. Types and methods of earthing
- Ans.
Earthing is the process of connecting electrical systems to the ground to prevent electric shock and protect equipment.
Types of earthing include plate earthing, pipe earthing, rod earthing, and strip earthing.
Methods of earthing include neutral earthing, equipment earthing, and system earthing.
Earthing is essential for safety in electrical systems to prevent electric shock and damage to equipment.
Proper earthing ensure...
- Q3. Principle and types of TF
- Ans.
TF stands for Transformer. It is a static device used to transfer electrical energy between two or more circuits through electromagnetic induction.
Principle of TF involves Faraday's law of electromagnetic induction.
Types of TF include step-up, step-down, isolation, auto-transformer, etc.
TFs are used in power distribution, voltage regulation, impedance matching, etc.
- Q4. Starting current of dol starter
- Ans.
The starting current of a DOL starter is typically 6-8 times the rated current of the motor.
The Direct-On-Line (DOL) starter is used to start induction motors.
The starting current of a DOL starter is usually 6-8 times the rated current of the motor.
This high starting current can cause voltage drops and stress on the electrical system.
- Q5. How to choose the Ac cables
- Ans.
Choose AC cables based on current rating, insulation material, and environmental conditions.
Consider the current rating of the cable to ensure it can handle the load
Choose the appropriate insulation material based on the application and environment
Take into account environmental conditions such as temperature, moisture, and exposure to chemicals
Select the right cable size to minimize voltage drop and power loss
Ensure c...
- Q6. Basic electric questions like ohms law formula
Interview Preparation Tips
Deputy General Manager Interview Questions & Answers
Gammon Engineers And Contractors
C Radhakrishnan
posted on 26 Dec 2024
Selected
I applied via Referral and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. What is the diesel consumption for Dence Bituen material.
- Ans.
The diesel consumption for Dense Bitumen material varies depending on factors such as temperature, mix design, and equipment used.
Diesel consumption for Dense Bitumen material is typically measured in liters per ton of material produced.
Factors such as temperature of the mix, mix design, and type of equipment used can affect the diesel consumption.
For example, a higher temperature mix may require more diesel to heat th...
- Q2. Brief your Past Experience
- Ans.
I have over 10 years of experience in management roles, leading teams and implementing strategic initiatives.
Managed a team of 50+ employees in a retail setting, increasing sales by 20% within one year
Implemented new customer service protocols that resulted in a 15% increase in customer satisfaction
Led cross-functional projects to streamline operations and reduce costs by 10%
Interview Preparation Tips
2. A specific answer is required for the Question.
3. Your language should be apparent communication.
4. Avoid unwanted explanations when answering the question.
Senior Structural Engineer Interview Questions & Answers
TPF Engineering
Anonymous
posted on 16 Jan 2025
(2 Questions)
- Q1. Response reduction factor.
- Q2. Seismic design as per IRS codes
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.
(5 Questions)
- Q1. What is bar bending schedule
- Ans.
Bar bending schedule is a document that provides details of reinforcement steel bars used in construction projects.
It includes details such as bar mark, bar size, quantity, shape, and bending dimensions.
Helps in estimating the quantity of steel required for construction.
Ensures proper placement and bending of reinforcement bars as per design specifications.
Used by contractors, engineers, and construction workers for re...
- Q2. 28 days concrete strength
- Ans.
28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing.
28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing
It is important for assessing the quality of concrete and its ability to support structural loads
The strength of concrete typically continues to increase beyond 28 days, but 28 days is the standard testing
- Q3. Difference between mivan and conventional
- Ans.
Mivan is a modern construction technique using aluminum formwork, while conventional construction involves traditional methods like brick and mortar.
Mivan is faster and more efficient than conventional construction methods.
Mivan requires skilled labor for installation of aluminum formwork.
Conventional construction is more labor-intensive and time-consuming.
Mivan provides better quality finishes compared to conventional...
- Q4. What is self leveling concrete
- Ans.
Self leveling concrete is a type of concrete that has a high flow consistency and is used to create smooth and level surfaces.
Self leveling concrete is designed to flow easily and settle into place without the need for troweling or leveling.
It is commonly used to level uneven floors before installing flooring materials such as tile or carpet.
Self leveling concrete can be applied in thicknesses ranging from a featheredg...
- Q5. How many days will take 1st Aluform mockup Concreting
- Ans.
The 1st Aluform mockup concreting typically takes 1-2 days to complete.
1-2 days is the usual timeframe for 1st Aluform mockup concreting
Factors such as weather conditions, size of the mockup, and availability of resources can affect the duration
Proper planning and coordination can help expedite the process
Interview Preparation Tips
- Construction
- Structural
- Quality Control
- Quality Assurance
- Bar Bending Schedule
- Project Execution
Citec Engineering Interview FAQs
Tell us how to improve this page.
Citec Engineering Interviews By Designations
Interview Questions for Popular Designations
Citec Engineering Interview Process
based on 6 interviews
Interview experience
Interview Questions from Similar Companies
Citec Engineering Reviews and Ratings
based on 103 reviews
Rating in categories
|
Design Engineer
84
salaries
|  â‚ą3 L/yr - â‚ą10.1 L/yr |
|
Senior Design Engineer
75
salaries
| â‚ą5.3 L/yr - â‚ą13 L/yr |
|
Lead Engineer
52
salaries
| â‚ą7.7 L/yr - â‚ą16.5 L/yr |
|
Consultant Engineer
24
salaries
| â‚ą3.8 L/yr - â‚ą15 L/yr |
|
Piping Design Engineer
19
salaries
| â‚ą4 L/yr - â‚ą9 L/yr |
L&T Energy Hydrocarbon
Tata Projects
TechnipFMC
Jacobs Engineering Group
- Home >
- Interviews >
- Citec Engineering Interview Questions
