Upload Button Icon Add office photos

Filter interviews by

UPRVUNL Assistant Engineer Interview Questions, Process, and Tips

Updated 6 Jul 2024

Top UPRVUNL Assistant Engineer Interview Questions and Answers

View all 6 questions

UPRVUNL Assistant Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(5 Questions)

  • Q1. Use of oil in transformer?
  • Ans. 

    Oil in transformers is used for cooling and insulation purposes.

    • Oil helps in dissipating heat generated in the transformer

    • It also provides insulation to prevent electrical breakdown

    • Mineral oil is commonly used in transformers for its dielectric properties

  • Answered by AI
  • Q2. Why don't we use water for transformer cooling
  • Ans. 

    Water has poor dielectric properties and can cause electrical failures in transformers.

    • Water has poor dielectric properties, which can lead to electrical failures in transformers.

    • Water can cause corrosion and rusting of transformer components.

    • Water can also lead to insulation breakdown and reduced efficiency of the transformer.

    • Mineral oil or synthetic esters are commonly used for transformer cooling due to their better

  • Answered by AI
  • Q3. What is generator terminal voltage in 210 MW unit
  • Ans. 

    Generator terminal voltage in a 210 MW unit is typically around 20-24 kV.

    • Generator terminal voltage is usually maintained within a specific range to ensure proper functioning of the unit

    • The voltage can vary based on the specific design and configuration of the generator

    • In a 210 MW unit, the terminal voltage is typically around 20-24 kV

  • Answered by AI
  • Q4. Which type of motors are commonly used in thermal power plant
  • Ans. 

    Induction motors are commonly used in thermal power plants.

    • Induction motors are preferred due to their simplicity, reliability, and low cost.

    • They are used for driving pumps, fans, compressors, and other auxiliary equipment in thermal power plants.

    • Synchronous motors are also used for applications requiring precise speed control.

    • DC motors may be used in some specific cases where variable speed control is needed.

  • Answered by AI
  • Q5. Name major motors in thermal power plant
  • Ans. 

    Major motors in a thermal power plant include boiler feed pump motor, forced draft fan motor, induced draft fan motor, and condensate extraction pump motor.

    • Boiler feed pump motor: used to pump feedwater into a boiler

    • Forced draft fan motor: used to supply air to the furnace for combustion

    • Induced draft fan motor: used to remove flue gases from the furnace

    • Condensate extraction pump motor: used to extract condensate from t

  • Answered by AI

I applied via Recruitment Consultant and was interviewed in Dec 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. 1 NF vs 2NF ? What is cookies, digital signature, SSL
  • Ans. 

    NF and 2NF are normal forms in database design. Cookies are small text files stored on a user's device. Digital signature and SSL are security measures for online communication.

    • NF stands for Normal Form and is used in database design to ensure data is organized and free of redundancy.

    • 2NF is a higher level of normalization that ensures each non-key attribute is dependent on the entire primary key.

    • Cookies are small text ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Plz prepare web Technology and cyber security

Skills evaluated in this interview

Assistant Engineer Interview Questions Asked at Other Companies

Q1. Why do we take only 1 set of cube sample at a casting of concrete ... read more
asked in Randstad
Q2. 1.Define the term capacitance & inductance 2.what is Rectifie ... read more
Q3. How do we take slump for casting of concrete and what if when we ... read more
asked in TCE
Q4. What are the provisions you check for, designing a beam/column ac ... read more
Q5. What is the 5s.and how is the important of a industry??

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via campus placement at University Institute of Technology, Bhopal

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell Me About IGBT
  • Ans. 

    IGBT is a power semiconductor device used for switching applications in power electronics.

    • IGBT combines the advantages of MOSFET and BJT transistors

    • It has high input impedance like a MOSFET and low on-state voltage drop like a BJT

    • Used in applications like motor drives, inverters, and power supplies

  • Answered by AI
  • Q2. What Are The Power Electronics Devices
  • Ans. 

    Power electronics devices are electronic components used to control and convert electrical power.

    • Power diodes: used for rectification in power supplies

    • Thyristors: used for switching and control in high power applications

    • Power transistors: used for amplification and switching in power circuits

    • IGBTs (Insulated Gate Bipolar Transistors): used in high power applications like motor drives

    • MOSFETs (Metal-Oxide-Semiconductor F...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Tell Me About Your Self
  • Ans. 

    I am a recent graduate with a degree in engineering and a passion for problem-solving and innovation.

    • Recent graduate with a degree in engineering

    • Passionate about problem-solving and innovation

    • Strong communication and teamwork skills

    • Experience with technical projects and internships

  • Answered by AI
  • Q2. If We recruit you Where You see yourself After 2 years
  • Ans. 

    In two years, I see myself taking on more responsibilities and contributing significantly to the team's projects.

    • Continuing to learn and grow in my role as an Assistant Engineer

    • Taking on more complex projects and tasks

    • Building strong relationships with colleagues and stakeholders

    • Possibly pursuing further education or certifications to enhance my skills

    • Seeking opportunities for advancement within the company

  • Answered by AI

Interview Questionnaire 

2 Questions

  • Q1. What is standard of the maintaining?
  • Ans. 

    The standard of maintaining refers to the level of quality and consistency in upkeep and repair of equipment or systems.

    • Regular inspections and preventative maintenance are essential

    • Documentation of maintenance activities should be kept

    • Adherence to manufacturer's guidelines and industry standards is important

    • Proper training and certification of maintenance personnel is necessary

  • Answered by AI
  • Q2. What is minimum requirements of the employees standard
  • Ans. 

    The minimum requirements for employees standard vary depending on the industry and job position.

    • Minimum age requirement

    • Education and certification

    • Experience and skills

    • Physical and mental fitness

    • Background check and drug test

    • Language proficiency

    • Work authorization

    • Compliance with company policies and regulations

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All people are my advice to don't compromise the salaries and confirm to working hours and place?
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I applied via Walk-in and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Experience gathered in previous company
  • Q2. How to handle operations in chp
  • Ans. 

    Operations in CHP can be handled by ensuring proper maintenance, monitoring, and control of equipment and processes.

    • Regular maintenance of equipment to prevent breakdowns and ensure optimal performance

    • Continuous monitoring of processes to identify and address any issues

    • Effective control of fuel and energy consumption to optimize efficiency

    • Proper training and supervision of staff to ensure safe and efficient operations

    • I...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear and promt while giving answers, try to be to the point.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. How to managed manpower in critical condition.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. About the job profile in your previous company
  • Q2. Salary and experience
Round 2 - Technical 

(1 Question)

  • Q1. All Electrical related questions maily switch yard and electrical testing
Round 3 - Technical 

(1 Question)

  • Q1. Case study and problem solving
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. BBS safety ,legal requirements
  • Q2. Training plant safety
  • Q3. Precess safety management
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. What is Process about New development
  • Ans. 

    Process about new development involves planning, designing, testing, and implementing innovative ideas or products.

    • Researching market trends and customer needs

    • Creating a detailed project plan

    • Collaborating with cross-functional teams

    • Testing prototypes and gathering feedback

    • Iterating on designs based on feedback

    • Launching the new product or service

  • Answered by AI
  • Q2. What is MSA, Control Plan
  • Ans. 

    MSA stands for Measurement System Analysis and Control Plan is a documented procedure to ensure quality control.

    • MSA is a method used to assess the measurement system variation to ensure data accuracy and reliability.

    • Control Plan is a detailed document outlining the steps to maintain quality control in production processes.

    • MSA includes tools like Gage R&R, Bias, Linearity, Stability, and Attribute Agreement Analysis.

    • Con...

  • Answered by AI
  • Q3. What is 7 QC Tools
  • Ans. 

    7 QC Tools are a set of tools used for quality control and problem-solving in manufacturing and business processes.

    • Check Sheet: Used to collect and analyze data in an organized manner.

    • Histogram: Represents data distribution visually to identify patterns and trends.

    • Pareto Chart: Helps prioritize issues by showing the most significant factors affecting quality.

    • Cause and Effect Diagram (Fishbone Diagram): Identifies root ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge about any field in Details

Skills evaluated in this interview

I applied via Approached by Company and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Asked about the Solar O&M briefly
  • Q2. Related to job responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep update the resume daily in Naukri portal and chances to get more calls from the companies

UPRVUNL Interview FAQs

How many rounds are there in UPRVUNL Assistant Engineer interview?
UPRVUNL interview process usually has 1 rounds. The most common rounds in the UPRVUNL interview process are Technical.
What are the top questions asked in UPRVUNL Assistant Engineer interview?

Some of the top questions asked at the UPRVUNL Assistant Engineer interview -

  1. 1 NF vs 2NF ? What is cookies, digital signature, ...read more
  2. Which type of motors are commonly used in thermal power pl...read more
  3. why don't we use water for transformer cool...read more

Tell us how to improve this page.

UPRVUNL Assistant Engineer Salary
based on 9 salaries
₹11 L/yr - ₹25.1 L/yr
285% more than the average Assistant Engineer Salary in India
View more details

UPRVUNL Assistant Engineer Reviews and Ratings

based on 5 reviews

4.0/5

Rating in categories

3.0

Skill development

4.9

Work-life balance

4.0

Salary

4.9

Job security

3.0

Company culture

1.7

Promotions

4.0

Work satisfaction

Explore 5 Reviews and Ratings
Assistant Engineer
9 salaries
unlock blur

₹11 L/yr - ₹25 L/yr

Diploma Electrical Engineer
6 salaries
unlock blur

₹0.7 L/yr - ₹2.5 L/yr

Computer Operator
4 salaries
unlock blur

₹0.8 L/yr - ₹3 L/yr

Superintending Engineer
3 salaries
unlock blur

₹26.3 L/yr - ₹30 L/yr

Electrical Maintenance Engineer
3 salaries
unlock blur

₹1.5 L/yr - ₹6 L/yr

Explore more salaries
Compare UPRVUNL with

NTPC

4.2
Compare

Power Grid Corporation of India

4.4
Compare

Tata Power

3.9
Compare

Adani Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview