Filter interviews by
I applied via Naukri.com and was interviewed in Nov 2023. There was 1 interview round.
5S is a workplace organization method focusing on efficiency and safety. TPM (Total Productive Maintenance) is a strategy for maximizing equipment effectiveness.
5S stands for Sort, Set in Order, Shine, Standardize, Sustain
TPM involves proactive and preventive maintenance to keep equipment running smoothly
Implementing 5S helps create a clean and organized work environment, reducing waste and improving productivity
TPM ai...
7QC tools are essential for quality control and improvement in manufacturing processes.
Helps in identifying and solving quality-related problems
Provides a systematic approach to data analysis
Improves decision-making based on data-driven insights
Enhances overall quality management practices
Examples: Pareto chart, Ishikawa diagram, Control charts
I applied via Walk-in and was interviewed before Mar 2021. There were 3 interview rounds.
IAFT stands for Institute of Advanced Film and Television. It is an educational institution that offers courses in film and television production.
IAFT is located in Cebu, Philippines.
It offers diploma and certificate courses in film and television production.
The courses cover various aspects of production such as screenwriting, directing, cinematography, and editing.
IAFT has state-of-the-art facilities including sound ...
OEE can be calculated by multiplying Availability, Performance, and Quality percentages.
Calculate Availability by dividing Operating Time by Planned Production Time.
Calculate Performance by dividing Actual Production by Maximum Production.
Calculate Quality by dividing Good Units by Total Units Produced.
Multiply Availability, Performance, and Quality percentages to get OEE.
The 8th pillar of TQM is continuous improvement.
Continuous improvement is the ongoing effort to improve products, services, and processes.
It involves constantly seeking ways to enhance quality, efficiency, and customer satisfaction.
Examples of continuous improvement practices include Kaizen, Six Sigma, and Lean methodologies.
5S is a methodology used in industries to improve workplace organization and efficiency.
5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.
It focuses on organizing the workplace, eliminating waste, and maintaining cleanliness.
Sort involves removing unnecessary items from the workplace.
Set in Order involves arranging necessary items in a logical and efficient manner.
Shine involves cleaning and maintaining...
The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
FTP can be increased by optimizing network settings and using a faster internet connection.
Optimize network settings by reducing latency and packet loss
Use a faster internet connection with higher bandwidth
Consider upgrading hardware such as routers and network cards
Use FTP accelerators or compression tools to improve transfer speeds
Shaft alignment is critical for proper functioning of machinery. Various methods like laser alignment, dial indicator alignment, etc. can be used.
Shaft alignment is important for smooth operation of machinery.
Laser alignment is a popular method for shaft alignment.
Dial indicator alignment is another method used for shaft alignment.
Proper installation and maintenance of bearings can also help in shaft alignment.
Misalign...
An alloy is a mixture of two or more metals or a metal and a non-metal.
Alloys are created to enhance the properties of metals, such as strength, durability, and resistance to corrosion.
Examples of alloys include brass (copper and zinc), bronze (copper and tin), and steel (iron and carbon).
Alloys can also be created by adding small amounts of other elements to a metal, such as aluminum to titanium to create a stronger a...
PDI report stands for Pre-Delivery Inspection report which is a checklist used to ensure that a product is ready for delivery.
PDI report is used to check the quality of a product before delivery
It is a checklist that includes all the necessary items that need to be inspected
PDI report is commonly used in the automotive industry to ensure that vehicles are ready for delivery
It can also be used in other industries such a...
A paint shop process audit report is a document that evaluates the efficiency and effectiveness of the paint shop process.
The report should include an overview of the paint shop process and its objectives.
It should evaluate the process for compliance with safety regulations and environmental standards.
The report should identify any areas of improvement and provide recommendations for corrective actions.
It should also i...
Fi problem on alloy wheels
Check for any cracks or damages on the wheels
Inspect the tire pressure and alignment
Ensure that the lug nuts are tightened properly
Consider balancing the wheels
Consult with a specialist if the issue persists
Top trending discussions
posted on 26 Nov 2017
A combination set is a tool used for measuring and marking angles, distances, and depths accurately.
Combination sets are commonly used in engineering and construction.
They typically include a protractor, ruler, and depth gauge.
The protractor is used to measure and mark angles.
The ruler is used to measure and mark distances.
The depth gauge is used to measure and mark depths.
Combination sets are versatile and can be used...
There are several types of CNC control units used in engineering.
There are three main types of CNC control units: open-loop, closed-loop, and computer numerical control (CNC).
Open-loop control units are the simplest and least expensive, but they do not provide feedback on the actual position of the machine.
Closed-loop control units use feedback sensors to continuously monitor and adjust the position of the machine, res...
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.
Improving communication and personality requires self-awareness, active listening, and continuous learning.
Practice active listening to understand others' perspectives
Be aware of your own communication style and adjust as needed
Seek feedback and be open to constructive criticism
Read books or take courses on communication and interpersonal skills
Practice empathy and emotional intelligence
Be respectful and courteous in a
First impressions can be shown through body language, attire, and communication skills.
Body language can convey confidence or nervousness
Attire can show professionalism or lack thereof
Communication skills can demonstrate intelligence and articulation
Eye contact and a firm handshake can also make a positive impression
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
posted on 19 Jan 2021
I was interviewed in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.
based on 2 interviews
Interview experience
based on 55 reviews
Rating in categories
Engineer
343
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
329
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
323
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
309
salaries
| ₹0 L/yr - ₹0 L/yr |
Graduate Engineer Trainee (Get)
163
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Samvardhana Motherson Group
Ramkrishna Forgings
Wheels