Filter interviews by
I applied via Walk-in and was interviewed before Mar 2021. There were 3 interview rounds.
IAFT stands for Institute of Advanced Film and Television. It is an educational institution that offers courses in film and television production.
IAFT is located in Cebu, Philippines.
It offers diploma and certificate courses in film and television production.
The courses cover various aspects of production such as screenwriting, directing, cinematography, and editing.
IAFT has state-of-the-art facilities including sound ...
OEE can be calculated by multiplying Availability, Performance, and Quality percentages.
Calculate Availability by dividing Operating Time by Planned Production Time.
Calculate Performance by dividing Actual Production by Maximum Production.
Calculate Quality by dividing Good Units by Total Units Produced.
Multiply Availability, Performance, and Quality percentages to get OEE.
The 8th pillar of TQM is continuous improvement.
Continuous improvement is the ongoing effort to improve products, services, and processes.
It involves constantly seeking ways to enhance quality, efficiency, and customer satisfaction.
Examples of continuous improvement practices include Kaizen, Six Sigma, and Lean methodologies.
5S is a methodology used in industries to improve workplace organization and efficiency.
5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.
It focuses on organizing the workplace, eliminating waste, and maintaining cleanliness.
Sort involves removing unnecessary items from the workplace.
Set in Order involves arranging necessary items in a logical and efficient manner.
Shine involves cleaning and maintaining...
The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
FTP can be increased by optimizing network settings and using a faster internet connection.
Optimize network settings by reducing latency and packet loss
Use a faster internet connection with higher bandwidth
Consider upgrading hardware such as routers and network cards
Use FTP accelerators or compression tools to improve transfer speeds
Shaft alignment is critical for proper functioning of machinery. Various methods like laser alignment, dial indicator alignment, etc. can be used.
Shaft alignment is important for smooth operation of machinery.
Laser alignment is a popular method for shaft alignment.
Dial indicator alignment is another method used for shaft alignment.
Proper installation and maintenance of bearings can also help in shaft alignment.
Misalign...
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
VFD stands for Variable Frequency Drive, which controls the speed of an AC motor by varying the frequency and voltage of the power supplied to it.
VFDs convert fixed frequency AC power to variable frequency AC power
They control motor speed by adjusting the frequency of the power supplied
VFDs can improve energy efficiency and reduce wear and tear on motors
Common applications include HVAC systems, pumps, and conveyor belt
A servo drive is an electronic amplifier used to power and control servo motors in automation systems.
Converts low-power control signals into high-power signals to move the servo motor
Provides precise control over speed, position, and torque of the motor
Commonly used in robotics, CNC machines, and industrial automation
Helps in achieving accurate and repeatable motion control
PLC stands for Programmable Logic Controller. There are various types of PLCs available in the market, each with its own unique features and capabilities. Some common types include modular PLCs, compact PLCs, and rack-mounted PLCs. There are also different software programs used to program and control PLCs.
Types of PLCs include modular PLCs, compact PLCs, and rack-mounted PLCs
Common software programs for PLC programmin...
I applied via Walk-in and was interviewed in Jun 2024. There was 1 interview round.
OEE stands for Overall Equipment Effectiveness and is a measure of how well a manufacturing process is performing.
OEE is calculated by multiplying Availability, Performance, and Quality.
Availability is the ratio of operating time to planned production time.
Performance is the ratio of actual production to maximum possible production.
Quality is the ratio of good parts to total parts produced.
OEE = Availability x Performa...
G code and M code are machine codes used in CNC programming to control the movements and functions of a machine tool.
G code is used to control the movements of the machine, such as linear or circular interpolation.
M code is used to control auxiliary functions of the machine, such as turning on or off coolant or spindle rotation.
G codes are typically used for positioning and feed rate control, while M codes are used for...
I have used software to create programs.
I have used software like AutoCAD, SolidWorks, and MATLAB to create programs for production engineering.
Using software allows for more precise and efficient programming compared to manual methods.
Software also helps in simulating and testing programs before implementation.
I applied via Recruitment Consulltant and was interviewed in Apr 2024. There was 1 interview round.
The base of planning is setting clear goals and objectives.
Setting specific, measurable, achievable, relevant, and time-bound (SMART) goals
Identifying resources needed to achieve the goals
Creating a timeline for completion
Regularly monitoring progress and making adjustments as needed
Steel Strips Wheels interview questions for popular designations
I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.
To solve a problem, it is important to first identify the root cause, brainstorm potential solutions, evaluate each solution, and implement the best one.
Identify the root cause of the problem
Brainstorm potential solutions
Evaluate each solution based on feasibility and impact
Implement the best solution and monitor its effectiveness
Types of pumps include centrifugal, reciprocating, and rotary pumps. The function of a pump is to move fluids from one place to another.
Centrifugal pumps use a rotating impeller to create a flow of fluid.
Reciprocating pumps use a piston or diaphragm to move fluid through a system.
Rotary pumps use rotating mechanisms to displace fluid.
Pumps are used in various industries such as water treatment, oil and gas, and manufac...
Pneumatic cylinders are devices that use compressed air to produce linear motion.
Single-acting cylinders: air pressure is used in one direction only
Double-acting cylinders: air pressure is used in both directions
Rotary cylinders: convert air pressure into rotational motion
Tandem cylinders: two cylinders connected in series for increased force
Telescoping cylinders: multiple stages for extended reach
Rodless cylinders: pi...
Get interview-ready with Top Steel Strips Wheels Interview Questions
Sheet metal work involves cutting, bending, and shaping thin metal sheets to create various products and components.
Involves cutting, bending, and shaping thin metal sheets
Commonly used in manufacturing of car bodies, aircraft wings, household appliances, etc.
Requires specialized tools such as shears, press brakes, and rollers
Can involve processes like punching, stamping, welding, and finishing
I applied via Recruitment Consulltant and was interviewed before Dec 2023. There was 1 interview round.
Types of breakers include circuit breakers, fuse breakers, and earth leakage circuit breakers.
Circuit breakers are designed to protect electrical circuits from damage caused by overload or short circuit.
Fuse breakers use a fuse to interrupt the circuit when an overload occurs.
Earth leakage circuit breakers detect small stray voltages and disconnect the power to prevent electric shock.
Other types include thermal-magneti...
I applied via Naukri.com and was interviewed in Nov 2023. There was 1 interview round.
5S is a workplace organization method focusing on efficiency and safety. TPM (Total Productive Maintenance) is a strategy for maximizing equipment effectiveness.
5S stands for Sort, Set in Order, Shine, Standardize, Sustain
TPM involves proactive and preventive maintenance to keep equipment running smoothly
Implementing 5S helps create a clean and organized work environment, reducing waste and improving productivity
TPM ai...
7QC tools are essential for quality control and improvement in manufacturing processes.
Helps in identifying and solving quality-related problems
Provides a systematic approach to data analysis
Improves decision-making based on data-driven insights
Enhances overall quality management practices
Examples: Pareto chart, Ishikawa diagram, Control charts
8D problem solving tool is a structured approach to identify, correct, and prevent recurring problems.
8D stands for 8 disciplines, each representing a step in the problem-solving process
Steps include defining the problem, forming a team, identifying root causes, implementing corrective actions, and preventing recurrence
Used in industries like automotive, manufacturing, and healthcare to address quality issues
Example: A...
Core tools of quality include Six Sigma, Lean, Total Quality Management, and Statistical Process Control.
Six Sigma focuses on reducing defects and improving processes.
Lean aims to eliminate waste and improve efficiency.
Total Quality Management emphasizes continuous improvement and customer satisfaction.
Statistical Process Control involves monitoring and controlling processes using statistical methods.
I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.
Top trending discussions
The duration of Steel Strips Wheels interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 60 interviews
Interview experience
based on 1.1k reviews
Rating in categories
Engineer
343
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
329
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
323
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
309
salaries
| ₹0 L/yr - ₹0 L/yr |
Graduate Engineer Trainee (Get)
163
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Samvardhana Motherson Group
Ramkrishna Forgings
Wheels