Upload Button Icon Add office photos

Steel Strips Wheels

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Steel Strips Wheels Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 21 Jan 2023

Steel Strips Wheels Graduate Engineer Trainee (Get) Interview Experiences

5 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Simple question where asked related to time, distance speed, and graph

Round 3 - Technical 

(2 Questions)

  • Q1. Questions were related to heat transfer, som and thermodynamics and l casting process and few questions related to industrial engineering
  • Q2. And they also asked fluid questions too

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was totally technical, they asked me mostly question from som, euler equation , maximum bending in a beam
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basics of Electrical Engineering
  • Q2. About the Projects in UG

Interview Preparation Tips

Interview preparation tips for other job seekers - Study the basic of electrical engineering, all type motors

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

I applied via Campus Placement and was interviewed in Dec 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic concepts about your stream and general aptitude

Round 2 - Technical 

(1 Question)

  • Q1. Tell me about your project, skills you have mentioned in the resume CNC
Round 3 - HR 

(1 Question)

  • Q1. Tell me about yourself Tell me about your parents Where do you live What are your goals Wanna go for higher studies or not

Interview Preparation Tips

Interview preparation tips for other job seekers - Should have knowledge about your field

I applied via Campus Placement and was interviewed in Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Type of value , comparison between four stroke and two strokes engine
  • Ans. 

    Four-stroke and two-stroke engines differ in their operating cycles and efficiency.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stroke engines combine these strokes.

    • Four-stroke engines are more fuel-efficient and produce less pollution compared to two-stroke engines.

    • Two-stroke engines have a simpler design and are lighter, making them suitable for applications where weigh...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - While writing a mail u should be given the updated resume to company . And in subject you should mention the job role which for you are applying .
And in compose section you should mention your skils .

Steel Strips Wheels interview questions for designations

 Graduate Trainee

 (1)

 Production Graduate Engineer Trainee

 (1)

 Diploma Trainee Engineer

 (3)

 Software Engineer Trainee

 (1)

 Diploma Engineer Trainee - DET

 (1)

 IT Trainee

 (1)

 MGT. Trainee

 (1)

 Production Engineer

 (5)

I applied via Campus Placement and was interviewed in Jul 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Types of bearing Types of valves Where do we use bearings
  • Ans. 

    Bearings are used to reduce friction and support rotating or moving parts in machinery.

    • There are several types of bearings, including ball bearings, roller bearings, and plain bearings.

    • Ball bearings use balls to reduce friction between the moving parts.

    • Roller bearings use cylindrical rollers to support heavy loads.

    • Plain bearings have a sliding surface and are used in applications where low friction is required.

    • Other ty...

  • Answered by AI
  • Q2. Types of bearing Types of pumps Types of valves Casting techniques
  • Ans. 

    Types of bearings include ball, roller, plain, and thrust. Types of pumps include centrifugal, positive displacement, and axial flow. Types of valves include gate, globe, ball, and butterfly. Casting techniques include sand casting, investment casting, and die casting.

    • Types of bearings: ball, roller, plain, thrust

    • Types of pumps: centrifugal, positive displacement, axial flow

    • Types of valves: gate, globe, ball, butterfly

    • ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good workplace to work but do not Go if you want respect from others

Interview questions from similar companies

Interview Preparation Tips

Round: Test
Experience: Round I was an Online Test, 30 students were selected
Tips: Once you are through the tests, the next few rounds are a breeze. In my opinion the company is not looking for the best students, rather it knows that most students can adapt to the required roles with time and training. So I feel that their only concern is that they find candidates willing to stay there for sufficient enough time till their investment in the candidate pays off. So whatever you say to the interviewers please keep this at the back of your head. This includes them asking about your [plans for the future].

Round: Other Interview
Experience: Round II was the Interview, around 10-12 students got selected.
Tips: They will ask you about your resume and I feel they can tell the difference between a silly classroom project and some real work that you have done. But again its all about how you sell it. Go into the depths of it and convince them that your project is legitimate. Most questions I faced at this stage, were related to my resume. My advice keep it short, don't fill the pages.

Round: Group Discussion
Experience: The  final round was a group discussion.
Tips: The GD if you make it through is the real clincher. For me to dominate in my GD was cake walk. I was always a good speaker and I easily dominate. I feel that is what convinced them the most.

General Tips: My placement experience from my point of view was a joke. It does not test anything nor is it a reward for effort system. All the company sees you is a void entity they can fit into the system.They don't care about your extracurriculars, sports, quizzing ability, music, etc etc.They will look at your pointer to gauge if you can do work. Then they will take everything you say to gauge if you will stay at their company and be a worthy investment.Well in the beginning I felt quite apprehensive and I found the whole process daunting. I felt I couldn't survive the competition of my batchmates. I felt I was not adequately prepared for the tests. And looking at the sample questions really demotivated me. My advice- Don't do what I did at the beginning. Just go sit for the company regardless of rhyme or reason.
Skill Tips: To be honest, at the time I appeared for this company, my technical knowledge was very limited and I did not feel I was adequately prepared in the least. The tests usually have an aptitude or English sections. If your technical knowledge is limited, concentrate on these aspects. They are much easier to pick up and combined with CAT or GRE preparations, you should be able to score comfortably high on these sections.(and be assured, most people are in your state)
College Name: NIT SURATHKAL

Interview Preparation Tips

Round: Test
Experience: Online test (apti+tech).

Round: Technical Interview
Experience: 2 rounds of tech interview.

Round: HR Interview
Experience: Finally one HR interview.

General Tips: It was not my first company placement procedure, so anxiety was lesser (because of familiarity), but it was largely satisfying. They will let you know where ypy stand during the interview itself.
Skill Tips: Check the company's website (in my case, they had sent a link), which will help you know what exactly they are looking for. You can strengthen your skills in that area for a better chance. Answer HR carefully, be careful not to say anything that will show you in poor light.
College Name: NIT SURATHKAL

Interview Preparation Tips

Round: Test
Experience: An online test for the first round consisting of 60 questions with aptitude(including a couple of C questions) and tech equally divided - +1, -.25 marks. About a dozen students were shortlisted from each branch.
Tips: Arun Sharma Quant for aptitude. I didn't particularly prepare for the tech part, just brushed up on the basics.
Prepare Digital electronics, Microprocessors(8051), Control Systems for the online test.

Round: HR Interview
Experience: Interviews were held the next day, tech followed by HR. Both rounds were elimination rounds. Finally 5 people were chosen.
Tips: For the HR, prepare responses for a standard set of questions. It isn't nice to be caught unawares.

General Tips: Do not bluff in your resume. Keep it concise. In the tech round they made me explain every aspect covered in my resume in detail: Internship, Projects, workshops etc. If you mention that you are good at something(say C++/Java), be prepared to answer questions on it. Be confident! Remember, the company should be proud to recruit you! In almost all interviews the first question asked is "Tell me something about yourself" You don't want to start off by saying "Errrrr ..(pause) " Do some research on the company and ask them questions (try to be original here!)
Please do not waste your time sitting for companies you have absolutely no desire to work in (YES this happens a LOT) regardless of pressure from parents/friends/PC's. Instead, prepare for the profile you want! If you have clarity on this regard, things will work out. There will be ups and downs (mostly downs, till you get placed) but don't be disheartened. During placement, Patience is paramount.
Skill Tips: GET's go through 2 months of training in all divisions before being assigned to any specific one. You can ask them to elaborate on this process and whether or not they are flexible for inter-dept transfers after a couple of years. If they have a product that has just come out or is something you can relate to, do mention.
Skills:
College Name: NIT Surathkal

Interview Preparation Tips

General Tips: Robert Bosch is one of the leading core company.Although pay package is less at initial stage there is opportunity for career progression in Bosch. Basically one should be through on core subjects(BET & ATD,FM,MOM,DMD,MSM,SOM,BMP & MT,MDV,HT,ADMC,CAE) .Elective courses are not of much importance during placements.Keep memorizing and understand the basic equations and physical laws.Internship and major project is very much important.Keep solving basic aptitude problems.During online test it is most important that how fast you can solve problems than others.Find shortest ways to solve problems faster than others.Fastness comes only with Practice.

Skill Tips: Study all Basic core subjects Revise all equations and its applications Be through with all physical laws Be confidant with your answer(Interviewer may confuse you) Don't get afraid during interview If you don't know the answer tell frankly Google about the company before you go to the Interview.
Skills:
College Name: NIT Surathkal

Interview Preparation Tips

Round: Test
Experience: There just about 45 students who wrote the initial screening test, I think 20 got through.

Round: Other Interview
Experience: Then, it was the interview round. They focused mainly on Control Systems, since the profile included designing embedded control for the various fuel injectors, carburetors and stuff. Easy enough, they did not go very deep into the subject and most of the interview was simple conversation.

General Tips: I suppose one thing I did not do is to tell them that you really want the job. There was a question where they asked me if I was ready to guarantee that I would stay at Bosch for at least 3 years and I had said no. This led to them asking if I intended to pursue higher studies and this is something you would like to avoid. Not really exhausting or anything, I felt the whole process (one interview) was simple and not at all exhausting.
Skill Tips: I did not refer any material specifically for placements, but GRE preparation helped a lot. Also, I had attended ~8 interviews prior and was filled with irrational confidence when I went for the interview. Perhaps, they noticed.
College Name: NIT SURATHKAL
Contribute & help others!
anonymous
You can choose to be anonymous

Steel Strips Wheels Interview FAQs

How many rounds are there in Steel Strips Wheels Graduate Engineer Trainee (Get) interview?
Steel Strips Wheels interview process usually has 2-3 rounds. The most common rounds in the Steel Strips Wheels interview process are Technical, Resume Shortlist and Aptitude Test.
How to prepare for Steel Strips Wheels Graduate Engineer Trainee (Get) interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Steel Strips Wheels. The most common topics and skills that interviewers at Steel Strips Wheels expect are AutoCAD, Brick Work, CATIA, Civil Engineering and Communication Skills.
What are the top questions asked in Steel Strips Wheels Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Steel Strips Wheels Graduate Engineer Trainee (Get) interview -

  1. Types of bearing Types of valves Where do we use beari...read more
  2. Type of value , comparison between four stroke and two strokes eng...read more
  3. Types of bearing Types of pumps Types of valves Casting techniq...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

Acuity Knowledge Partners

No Interviews

INTERVIEWS

Torrent Gas

No Interviews

JOBS

Techno Electric & Engineering Company

No Jobs

SALARIES

Techno Electric & Engineering Company

INTERVIEWS

G.G.Tronics

No Interviews

INTERVIEWS

Acuity Knowledge Partners

10 top interview questions

INTERVIEWS

Techno Electric & Engineering Company

No Interviews

SALARIES

Techno Electric & Engineering Company

Tell us how to improve this page.

Steel Strips Wheels Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

1 Interview rounds

  • Resume Shortlist Round
View more
Steel Strips Wheels Graduate Engineer Trainee (Get) Salary
based on 163 salaries
₹1.2 L/yr - ₹3 L/yr
44% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Steel Strips Wheels Graduate Engineer Trainee (Get) Reviews and Ratings

based on 47 reviews

3.5/5

Rating in categories

3.0

Skill development

2.9

Work-life balance

3.0

Salary

2.3

Job security

3.0

Company culture

2.7

Promotions

3.2

Work satisfaction

Explore 47 Reviews and Ratings
Engineer
343 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
329 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
323 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
309 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Graduate Engineer Trainee (Get)
163 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Steel Strips Wheels with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Ramkrishna Forgings

3.6
Compare

Wheels

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent