Filter interviews by
I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.
To solve a problem, it is important to first identify the root cause, brainstorm potential solutions, evaluate each solution, and implement the best one.
Identify the root cause of the problem
Brainstorm potential solutions
Evaluate each solution based on feasibility and impact
Implement the best solution and monitor its effectiveness
Types of pumps include centrifugal, reciprocating, and rotary pumps. The function of a pump is to move fluids from one place to another.
Centrifugal pumps use a rotating impeller to create a flow of fluid.
Reciprocating pumps use a piston or diaphragm to move fluid through a system.
Rotary pumps use rotating mechanisms to displace fluid.
Pumps are used in various industries such as water treatment, oil and gas, and manufac...
Pneumatic cylinders are devices that use compressed air to produce linear motion.
Single-acting cylinders: air pressure is used in one direction only
Double-acting cylinders: air pressure is used in both directions
Rotary cylinders: convert air pressure into rotational motion
Tandem cylinders: two cylinders connected in series for increased force
Telescoping cylinders: multiple stages for extended reach
Rodless cylinders: pi...
I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.
Top trending discussions
I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.
The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.
Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.
Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.
Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for
A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.
Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.
They are designed to capture particles that are smaller than what can be filtered by regular filters.
These filters can be made of various materials such as paper, fabric, or synthetic fibers.
Examples of size ...
Direct metalizing is applicable on materials that can conduct electricity.
Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.
The material should be able to conduct electricity for direct metalizing to be applicable.
Materials like plastic, glass, and ceramics can be direct metalized.
Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.
The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.
UV energy required for curing varies depending on the material being cured
Intensity of the UV light also affects the amount of energy required
UV energy is typically measured in Joules per square centimeter (J/cm²)
Examples of materials that require UV curing include adhesives, coatings, and inks
The amount of DFT required as per standard varies depending on the specific industry and project requirements.
The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.
Different industries may have different standards for DFT.
The complexity and size of the project also influence the amount of DFT required.
DFT techniques include scan chains, built-in self-test (BI...
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
I have a valid driver's license for both cars and motorcycles.
I have a Class C license for cars
I also have a Class M license for motorcycles
I have a clean driving record with no accidents or violations
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.
Improving communication and personality requires self-awareness, active listening, and continuous learning.
Practice active listening to understand others' perspectives
Be aware of your own communication style and adjust as needed
Seek feedback and be open to constructive criticism
Read books or take courses on communication and interpersonal skills
Practice empathy and emotional intelligence
Be respectful and courteous in a
First impressions can be shown through body language, attire, and communication skills.
Body language can convey confidence or nervousness
Attire can show professionalism or lack thereof
Communication skills can demonstrate intelligence and articulation
Eye contact and a firm handshake can also make a positive impression
I applied via Approached by Company and was interviewed before Sep 2022. There were 3 interview rounds.
What is IATF ?
IATF Clause?
Major Achievements?
Why should i hire you ?
Briefly your Daily routine work?
I applied via Naukri.com and was interviewed before Dec 2022. There were 3 interview rounds.
Implemented a project to reduce defects in manufacturing process
Analyzed data to identify root causes of defects
Implemented process improvements and trained operators
Conducted regular audits to ensure sustained improvements
based on 6 interviews
Interview experience
based on 62 reviews
Rating in categories
Engineer
367
salaries
| ₹1.7 L/yr - ₹5.5 L/yr |
Senior Engineer
330
salaries
| ₹2.9 L/yr - ₹7.8 L/yr |
Assistant Manager
307
salaries
| ₹3.8 L/yr - ₹10 L/yr |
Assistant Engineer
307
salaries
| ₹1.5 L/yr - ₹3.8 L/yr |
Quality Engineer
164
salaries
| ₹1.6 L/yr - ₹4.8 L/yr |
SKF
Tata AutoComp Systems
Magna International
JBM Group