Upload Button Icon Add office photos

Subros

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Subros Senior Engineer Interview Questions and Answers

Updated 4 Dec 2023

Subros Senior Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Design question, HVAC cooling question, work related question, situation question, plastic and sheet metal question...
Round 3 - HR 

(1 Question)

  • Q1. Work related experience, salary question, salary negotiation..

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer each and Every Work Related questions with a good example that justifying your experience.
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Kanban,Heijunka,JIT,SAP,FIFO, Inventory mangement
Round 3 - Technical 

(1 Question)

  • Q1. SAP,Capacity,Planning

Interview Preparation Tips

Interview preparation tips for other job seekers - Pl prepare for interview regarding SAP, Production planning etc.

Senior Engineer Interview Questions Asked at Other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
asked in Nagarro
Q2. Write a program: two input, one is N(any integer, lets say 3), se ... read more
asked in Tata Elxsi
Q3. What is Quality Assurance. Difference between Quality assurance a ... read more
Q4. Is it possible to work with multiple threads in core data? If so, ... read more
Q5. When you will perform Half or Full engine overhauling.

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Jul 2019. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What's process engineering works
  • Ans. 

    Process engineering involves designing, optimizing, and managing industrial processes to improve efficiency and productivity.

    • Process engineering focuses on analyzing and improving processes in various industries such as manufacturing, chemical, and pharmaceutical.

    • It involves identifying bottlenecks, reducing waste, and implementing process improvements to enhance productivity.

    • Process engineers use tools like process fl...

  • Answered by AI
  • Q2. What's the difference between cp and pp
  • Ans. 

    cp and pp are both commands in Unix-like operating systems, but they have different functionalities.

    • cp stands for 'copy' and is used to copy files or directories from one location to another.

    • pp stands for 'print and pause' and is used to print files with pagination, pausing after each page.

    • cp can be used to create a duplicate of a file or directory, while pp is used for printing files in a controlled manner.

    • Example: cp...

  • Answered by AI
  • Q3. What's control plan
  • Ans. 

    A control plan is a documented procedure that outlines the steps and measures taken to ensure quality and consistency in a manufacturing process.

    • Control plans are commonly used in industries such as automotive, aerospace, and electronics.

    • They include details on the process steps, key characteristics, measurement methods, and acceptable tolerances.

    • Control plans help identify potential risks, prevent defects, and ensure ...

  • Answered by AI
  • Q4. What's smed
  • Ans. 

    SMED stands for Single Minute Exchange of Die. It is a lean manufacturing technique used to reduce the time it takes to change over a production process.

    • SMED is used to minimize downtime during changeovers

    • It focuses on separating internal and external setup tasks

    • The goal is to convert as many internal setup tasks to external setup tasks

    • By reducing setup time, production flexibility and efficiency are improved

  • Answered by AI
  • Q5. What's capex
  • Ans. 

    Capex stands for capital expenditure, which refers to the funds used by a company to acquire, upgrade, or maintain physical assets.

    • Capex is an investment made by a company to purchase or improve long-term assets such as buildings, equipment, or technology.

    • It is different from operational expenses (opex) which are ongoing costs to run the business.

    • Capex is typically planned and budgeted for in advance.

    • Examples of capex ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared as per your resume shared.

Skills evaluated in this interview

I applied via Walk-in and was interviewed before Sep 2020. There was 1 interview round.

Interview Questionnaire 

8 Questions

  • Q1. What's your special with others
  • Ans. I am not compare anyone with me, only learn from others what I need.
  • Answered Anonymously
  • Q2. Are you fit this post
  • Ans. 

    Yes, I am fit for the post of Quality Engineer.

    • I have a strong background in quality engineering with experience in implementing quality control processes.

    • I am skilled in conducting quality audits and inspections to identify areas for improvement.

    • I have expertise in using quality tools and methodologies such as Six Sigma and Lean principles.

    • I have successfully led cross-functional teams to resolve quality issues and im...

  • Answered by AI
  • Q3. In future we found you are not suitable to that place, what your answer
  • Ans. No, without my service, you can't judge me, not only me , anyone
  • Answered Anonymously
  • Q4. Describe yourself
  • Ans. 

    I am a detail-oriented Quality Engineer with a strong background in ensuring product quality and process improvement.

    • Experienced in conducting quality audits and inspections

    • Proficient in using statistical analysis tools to identify and resolve quality issues

    • Skilled in developing and implementing quality control procedures

    • Strong problem-solving and analytical skills

    • Excellent communication and teamwork abilities

  • Answered by AI
  • Q5. How much profit to us by you
  • Ans. From me , you can expect profitable profit. I assured that .
  • Answered Anonymously
  • Q6. What's your bad habits
  • Ans. 

    I tend to procrastinate and sometimes struggle with time management.

    • Procrastination

    • Time management

    • Difficulty prioritizing tasks

    • Occasional lack of focus

  • Answered by AI
  • Q7. Any more questions( HR )
  • Ans. Yes, can i work this organization is my own.
  • Answered Anonymously
  • Q8. Suppose we rejected you, what you think

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold, straightforward vision, good eye contact, don't show your fear out, sit straight, be positive,

I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Please explain about your profile

Interview Preparation Tips

Interview preparation tips for other job seekers - First of all be free to attend the interview.
Be bold in your explanations.
Questions mainly fall from your profile explanation.

Try to tell what you have worked with.

I applied via Naukri.com and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. What is line balance
  • Ans. 

    Line balance refers to the equal distribution of work among different stations in a production line.

    • Line balance ensures that each station in a production line has a similar workload.

    • It helps in optimizing the efficiency and productivity of the production process.

    • Line balancing techniques involve analyzing the tasks, cycle times, and capacities of each station to achieve optimal balance.

    • An example of line balance is wh...

  • Answered by AI
  • Q2. What is lead time
  • Ans. 

    Lead time is the time it takes to complete a process from start to finish.

    • Lead time includes all the steps involved in a process, from planning to delivery.

    • It is an important metric for businesses to measure and improve efficiency.

    • Lead time can vary depending on the complexity of the process and the resources available.

    • For example, the lead time for manufacturing a car can be several months, while the lead time for del

  • Answered by AI
  • Q3. How to decide torque
  • Ans. 

    Torque is decided based on the required force and the distance from the axis of rotation.

    • Determine the required force for the task

    • Calculate the distance from the axis of rotation

    • Use the formula T = F x d to calculate torque

    • Consider any external factors that may affect torque requirements

    • Choose a motor or engine with sufficient torque output

  • Answered by AI
  • Q4. How to work with union
  • Ans. 

    Working with unions requires clear communication, respect, and a willingness to negotiate.

    • Establish open lines of communication with union representatives

    • Respect the collective bargaining agreement and union rules

    • Negotiate in good faith to find mutually beneficial solutions

    • Be prepared to compromise and find creative solutions

    • Stay informed about labor laws and regulations

    • Address any grievances or disputes promptly and f

  • Answered by AI
  • Q5. How to improve shopfloor
  • Ans. 

    Improving shopfloor requires optimizing processes, training employees, and utilizing technology.

    • Analyze current processes and identify areas for improvement

    • Invest in employee training and development

    • Implement technology such as automation and data analytics

    • Regularly review and adjust processes to ensure efficiency

    • Encourage employee feedback and suggestions

    • Maintain a clean and organized workspace

  • Answered by AI
  • Q6. What is 5s in the plant
  • Ans. 

    5S is a workplace organization method that uses a set of principles to create and maintain an organized, clean, and efficient work environment.

    • Sort - separate necessary items from unnecessary ones

    • Set in order - arrange necessary items in a logical manner

    • Shine - clean the work area and equipment

    • Standardize - establish procedures for maintaining the first three S's

    • Sustain - ensure that the first four S's are followed con...

  • Answered by AI
  • Q7. What is your goal in life

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and be on time

I was interviewed in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Waht is your achievements
  • Ans. 

    I have achieved several milestones throughout my career as a Senior Engineer.

    • Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.

    • Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.

    • Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All most 3 Rounds they conducted, they taken 3 days for every round and they taken allmost 3 months to select... For learners this company was good...

Interview Questionnaire 

1 Question

  • Q1. Basic electronics, about previous company, role & responsibility

I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What are the die casting and machining defects?
  • Ans. 

    Die casting and machining defects are common in manufacturing processes.

    • Die casting defects include porosity, shrinkage, cold shuts, and flash.

    • Machining defects include burrs, chatter marks, and tool marks.

    • Die casting defects can be caused by improper temperature, pressure, or metal flow.

    • Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.

    • Defects can lead to part failure, reduced

  • Answered by AI
  • Q2. What is the formula of filling and high speed ratio?
  • Ans. 

    Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.

    • Filling and high speed ratio formula is V/Q

    • V is the volume of the container and Q is the flow rate of the liquid

    • The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate

    • The higher the flow rate, the faster the c

  • Answered by AI
  • Q3. Why do u want to join Motherson?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always job needy in front of interviewer.

I applied via Walk-in and was interviewed in Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. 7 QC tools?
  • Ans. 

    The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • Check sheets

    • Control charts

    • Histograms

    • Pareto charts

    • Scatter diagrams

    • Stratification

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Roles & Responsibilities on previous company?
  • Ans. 

    As a Quality Engineer in my previous company, I was responsible for ensuring product quality, conducting audits, and implementing quality control processes.

    • Conducted product quality inspections and audits

    • Implemented quality control processes to improve product quality

    • Analyzed data to identify areas for improvement

    • Collaborated with cross-functional teams to address quality issues

    • Ensured compliance with industry standard

  • Answered by AI
  • Q3. QA & QC Difference?
  • Ans. 

    QA focuses on preventing defects while QC focuses on identifying and fixing defects.

    • QA is a proactive process that involves planning, designing, and executing tests to prevent defects from occurring.

    • QC is a reactive process that involves identifying defects through testing and then fixing them.

    • QA is focused on the entire software development life cycle while QC is focused on the testing phase.

    • Examples of QA activities ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn Basic, Be strong in that
Contribute & help others!
anonymous
You can choose to be anonymous

Subros Interview FAQs

How many rounds are there in Subros Senior Engineer interview?
Subros interview process usually has 3 rounds. The most common rounds in the Subros interview process are Technical, Resume Shortlist and HR.
How to prepare for Subros Senior Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Subros. The most common topics and skills that interviewers at Subros expect are Capa, Coordination, FIFO, Issue and PPC.
What are the top questions asked in Subros Senior Engineer interview?

Some of the top questions asked at the Subros Senior Engineer interview -

  1. Design question, HVAC cooling question, work related question, situation questi...read more
  2. Kanban,Heijunka,JIT,SAP,FIFO, Inventory mangem...read more
  3. SAP,Capacity,Plann...read more

Recently Viewed

INTERVIEWS

Honda

No Interviews

SALARIES

Deltatech Gaming

INTERVIEWS

Subros

No Interviews

INTERVIEWS

Subros

No Interviews

JOBS

AMOD INDUSTRIES

No Jobs

DESIGNATION

INTERVIEWS

Subros

No Interviews

INTERVIEWS

California Cake Cafe

No Interviews

JOBS

IDZ Digital

No Jobs

SALARIES

Tech Mahindra

Tell us how to improve this page.

Subros Senior Engineer Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more
Subros Senior Engineer Salary
based on 224 salaries
₹3.6 L/yr - ₹9.2 L/yr
33% less than the average Senior Engineer Salary in India
View more details

Subros Senior Engineer Reviews and Ratings

based on 52 reviews

3.4/5

Rating in categories

3.6

Skill development

3.4

Work-life balance

2.8

Salary

4.1

Job security

3.3

Company culture

2.8

Promotions

3.4

Work satisfaction

Explore 52 Reviews and Ratings
Assistant Engineer
2.7k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Engineer
1.8k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
927 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
411 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
352 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Subros with

DENSO

4.1
Compare

MAHLE Behr India

3.8
Compare

Sanden Vikas

4.0
Compare

Valeo

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview