Filter interviews by
The chemical formula of ethane is C2H6.
Ethane is a hydrocarbon with two carbon atoms and six hydrogen atoms.
The chemical formula for ethane is C2H6.
It is a colorless, odorless gas commonly used as a fuel.
Ethane is a simple alkane with the formula CH3-CH3.
The A/C cycle works by circulating refrigerant through a closed loop system to absorb and release heat, providing cooling in the process.
Refrigerant is compressed into a high pressure, high temperature gas in the compressor.
The hot gas then flows through the condenser coils, releasing heat and condensing into a high pressure liquid.
The liquid refrigerant passes through the expansion valve, where it expands and evaporat...
Condition given to resolve a problem. If i have sell my pen, what will be my focus on, promote n prove what best about my product.
I applied via Job Portal and was interviewed in May 2024. There was 1 interview round.
Quality core tools are essential techniques used in quality engineering to ensure product quality and process improvement.
Failure Mode and Effects Analysis (FMEA)
Control Plans
Statistical Process Control (SPC)
Measurement Systems Analysis (MSA)
Advanced Product Quality Planning (APQP)
Production Part Approval Process (PPAP)
I applied via Naukri.com and was interviewed in Sep 2024. There were 2 interview rounds.
I am a dedicated Quality Engineer with a strong background in quality control and process improvement.
Experienced in implementing quality management systems
Skilled in conducting root cause analysis
Proficient in statistical analysis tools like Minitab
Strong communication and problem-solving skills
Just asking tell your selv just like
I appeared for an interview in Aug 2022.
Subros interview questions for designations
I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.
Least count of screw gauge is the smallest measurement that can be read on the scale of the screw gauge.
The least count of a screw gauge is determined by the pitch of the screw and the number of divisions on the circular scale.
It is calculated as the pitch divided by the number of divisions on the circular scale.
For example, if the pitch is 0.5 mm and there are 100 divisions on the circular scale, the least count would
Get interview-ready with Top Subros Interview Questions
SPC stands for Statistical Process Control. It is a method of quality control that uses statistical methods to monitor and control a process.
SPC involves collecting and analyzing data to identify and reduce variation in a process
It helps to ensure that a process is operating within its specified limits and is capable of producing consistent results
Examples of SPC tools include control charts, histograms, and Pareto cha...
Corrective action is taken to address and resolve existing problems, while preventive action is taken to prevent potential problems from occurring.
Corrective action focuses on addressing and resolving existing problems or nonconformities.
Preventive action focuses on identifying and eliminating potential problems before they occur.
Corrective action is reactive, while preventive action is proactive.
Corrective action aims...
I am a detail-oriented Quality Engineer with a passion for continuous improvement and problem-solving.
Detail-oriented with a focus on quality standards
Passionate about continuous improvement
Skilled in problem-solving and root cause analysis
The steps for demin wheels involve cleaning, inspecting, repairing, and testing.
Clean the wheels thoroughly to remove any dirt or debris.
Inspect the wheels for any damage or defects.
Repair any issues found, such as replacing worn-out parts or fixing cracks.
Test the wheels to ensure they meet quality standards and perform as expected.
Hardness is the measure of a material's resistance to indentation or scratching.
Hardness is a property of materials that determines their ability to withstand deformation
It is often measured using tests like the Rockwell, Brinell, or Vickers hardness tests
Hardness can be influenced by factors such as the material's composition, heat treatment, and microstructure
Higher hardness generally indicates greater strength and d...
To upgrade suppliers, establish clear quality standards, conduct regular audits, provide feedback and support for improvement, and consider alternative suppliers.
Establish clear quality standards and communicate them to suppliers
Conduct regular audits to assess supplier performance and identify areas for improvement
Provide feedback and support to suppliers to help them meet quality standards
Consider alternative supplie...
Supplier selection criteria are the factors and considerations used to evaluate and choose suppliers for a company's procurement needs.
Quality and reliability of products or services
Supplier's financial stability and ability to meet demand
Supplier's track record and reputation
Cost and pricing
Supplier's location and proximity to the company
Supplier's compliance with industry standards and regulations
Supplier's capacity ...
posted on 9 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.
Seven QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
I applied via Naukri.com and was interviewed before Oct 2021. There were 2 interview rounds.
I applied via Walk-in and was interviewed in Apr 2021. There were 3 interview rounds.
Quality tools are techniques used to improve quality and productivity. Kaizen, 5S, fishbone diagram, and poka yoke are some examples.
Kaizen is a continuous improvement process that involves everyone in the organization.
5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing, and sustaining.
Fishbone diagram is a tool used to identify the root cause of a problem by analyzing its ...
based on 9 interviews
Interview experience
based on 29 reviews
Rating in categories
Assistant Engineer
2.7k
salaries
| ₹1.5 L/yr - ₹4 L/yr |
Deputy Engineer
1.8k
salaries
| ₹1.5 L/yr - ₹4.2 L/yr |
Diploma Trainee Engineer
921
salaries
| ₹1.2 L/yr - ₹3 L/yr |
Engineer
411
salaries
| ₹1.7 L/yr - ₹7 L/yr |
Production Engineer
340
salaries
| ₹1.2 L/yr - ₹6.9 L/yr |
JBM Group
Endurance Technologies
Spark Minda
Gabriel India