Upload Button Icon Add office photos

Filter interviews by

TP Central Odisha Distribution Junior Commercial Manager Interview Questions, Process, and Tips

Updated 1 Oct 2023

TP Central Odisha Distribution Junior Commercial Manager Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Normal aptitude online exam will be conducted.

Round 2 - Technical 

(5 Questions)

  • Q1. About transformer, At&C losses, about energy meter, about electricity energy bills, some basic kowledge about MS office
  • Q2. What is At&C losses ?
  • Ans. 

    AT&C losses refer to Aggregate Technical and Commercial losses in the electricity distribution system.

    • AT&C losses include technical losses (due to resistance in wires, transformers, etc.) and commercial losses (due to theft, billing errors, etc.)

    • These losses are expressed as a percentage of the total energy input into the distribution system.

    • Reducing AT&C losses is crucial for improving the financial health of distribu...

  • Answered by AI
  • Q3. How a energy meter connected ?
  • Ans. 

    An energy meter is connected by wiring it to the electrical circuit of a building or facility.

    • An energy meter is typically connected to the main electrical panel of a building.

    • The meter is wired in series with the main power supply to measure the amount of electricity consumed.

    • The connection must be done by a qualified electrician to ensure safety and accuracy.

    • Some energy meters also have the capability to connect wire...

  • Answered by AI
  • Q4. How electricity bills are calculated ?
  • Ans. 

    Electricity bills are calculated based on the amount of electricity consumed, the rate per unit, and any additional charges or discounts.

    • Electricity consumption is measured in kilowatt-hours (kWh)

    • The rate per unit is determined by the electricity provider

    • Additional charges may include taxes, surcharges, and service fees

    • Discounts may be applied for prompt payment or energy-saving practices

  • Answered by AI
  • Q5. What is copper loss ?
  • Ans. 

    Copper loss refers to the power loss in an electrical machine due to the resistance of copper windings.

    • Copper loss is also known as I^2R loss, where I is the current flowing through the winding and R is the resistance of the winding.

    • It is a major factor in determining the efficiency of electrical machines.

    • Copper loss can be reduced by using materials with lower resistance or by increasing the size of the conductors.

    • For...

  • Answered by AI

Interview questions from similar companies

I applied via Company Website and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What about your self

Interview Preparation Tips

Interview preparation tips for other job seekers - Interviewer wanted to best knowledge of your profile and your communication skills .

I applied via Company Website and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Related to distribution network, safety and Quality of work related.

Interview Preparation Tips

Interview preparation tips for other job seekers - Never miss guide the inteiviower.

I applied via Naukri.com and was interviewed before Jan 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Related questions my job
Round 3 - Aptitude Test 
Round 4 - Assignment 

Manager related

Interview Preparation Tips

Interview preparation tips for other job seekers - very good experience in Adani till today

I applied via Recruitment Consultant and was interviewed before May 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Position & JD

Interview Preparation Tips

Interview preparation tips for other job seekers - Please go thorugh the JD throughly to succeed.

I appeared for an interview in Sep 2020.

Interview Questionnaire 

1 Question

  • Q1. There was many technical and project related questions they asked me.

Interview Preparation Tips

Interview preparation tips for other job seekers - We should prepare for competency as per our core functions
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - One-on-one 

(7 Questions)

  • Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and belt clamping take-up up and blumber block top cover open and slue Ba...
  • Ans. 

    Belt clamping take-up pulley up and blumber block top cover open and slue Barring remove and new slue Barring checking and replace and bolts nut tightening sure and top cover fixed and bolts nut tightening sure and belt clamping and tackup pulley down and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q2. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and v-scraper remove and new v-scraper replace and bolts nut tigh...
  • Q3. Roller changed and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and fream number mark and Roller shift and Roller cut change and walked awa...
  • Q4. Motor replace work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and motor remove and new motor replace and bolts nut tightening sure and ...
  • Ans. 

    Old motor bolts nut open and new motor replace and bolts nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q5. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and gear box remove and new gear box replace and bolts nut tighten...
  • Ans. 

    Walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tightening sure and Dayal gauge eliminate process ok paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q6. Conveyer Barring checking and savings greasing work and safety first and all ppes sure and paper work and all pulley checking and savings Greasing sure and paper work cancelled and conveyer belt running o...
  • Q7. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolt nut open and old clean and fresh and new Oli Pur dropped and bolt...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement

I applied via Naukri.com and was interviewed before Nov 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Experience related questions Materials selection, material properties Types of hardwares, bolted joints types
Round 3 - Technical 

(1 Question)

  • Q1. Model test on Autodesk Inventor
Round 4 - HR 

(1 Question)

  • Q1. CTC Related discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with you resume/ CV questions more related to resume and experience
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Past experience based questions
  • Q2. What does your past company General Terms and Conditions about contract say ?
Round 3 - HR 

(2 Questions)

  • Q1. Checked behavioral aspects
  • Q2. Checked about Integrity

Interview Preparation Tips

Interview preparation tips for other job seekers - It's good company to work with. Offered work from during covid years then hybrid structure.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Current job profile
  • Ans. 

    Currently working as a Sales Manager at XYZ Company

    • Responsible for leading a team of sales representatives

    • Developing sales strategies to meet targets

    • Analyzing sales data and trends

    • Building relationships with clients and vendors

  • Answered by AI
  • Q2. Roal and responsibilities

TP Central Odisha Distribution Interview FAQs

How many rounds are there in TP Central Odisha Distribution Junior Commercial Manager interview?
TP Central Odisha Distribution interview process usually has 3 rounds. The most common rounds in the TP Central Odisha Distribution interview process are Resume Shortlist, Aptitude Test and Technical.
What are the top questions asked in TP Central Odisha Distribution Junior Commercial Manager interview?

Some of the top questions asked at the TP Central Odisha Distribution Junior Commercial Manager interview -

  1. How electricity bills are calculate...read more
  2. How a energy meter connecte...read more
  3. What is At&C losse...read more

Tell us how to improve this page.

TP Central Odisha Distribution Junior Commercial Manager Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Adani Power Interview Questions
3.9
 • 229 Interviews
Adani Group Interview Questions
3.9
 • 199 Interviews
Tata Power Interview Questions
3.9
 • 164 Interviews
NTPC Interview Questions
4.2
 • 158 Interviews
Suzlon Group Interview Questions
4.1
 • 131 Interviews
Torrent Power Interview Questions
3.7
 • 131 Interviews
Eaton Interview Questions
3.9
 • 122 Interviews
ReNew Interview Questions
4.2
 • 89 Interviews
GE Vernova Interview Questions
4.2
 • 89 Interviews
View all
Lead Engineer
98 salaries
unlock blur

₹3.5 L/yr - ₹8.7 L/yr

Team Lead
96 salaries
unlock blur

₹3.8 L/yr - ₹15.5 L/yr

Senior Officer
13 salaries
unlock blur

₹3.5 L/yr - ₹6.7 L/yr

Associate Lead
11 salaries
unlock blur

₹8.5 L/yr - ₹12 L/yr

Officer
10 salaries
unlock blur

₹3 L/yr - ₹4.8 L/yr

Explore more salaries
Compare TP Central Odisha Distribution with

Suzlon Group

4.1
Compare

Adani Power

3.9
Compare

Adani Group

3.9
Compare

NTPC

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview