Tata AutoComp Systems Design Engineer Interview Questions and Answers

Q1. Tell me about yourself
Add your answer
Q2. Previous compny details,work designation salary, skills software used.
Add your answer
Q3. Total exp, Why you leaving current compny
Add your answer
Q4. When you can come for interview
Add your answer

Q1. Tell me about yourself
Add your answer
Q2. Very details in college and professionl work note down by interviewer, very senior person.
Add your answer
Q3. Skills exactly what is your job role for evry company?
Add your answer
Q4. Checking product knowledge by asking some tricky queation.
Add your answer
Q5. Require more exp in to 3d and FEA
Add your answer
Q6. What is last salary and expectation
Add your answer
Q7. Why you switching the compny
Ans. 
Seeking new challenges and opportunities for growth.
• Looking for new challenges and opportunities to learn and grow

• Interested in working on different projects or industries

• Seeking a better work-life balance or company culture

• Want to relocate to a different city or country for personal reasons
Answered by AI
Add your answer
Q8. When you can join, notice period
Add your answer

First round is aptitude test all type of questions asked like verbal, reasoning and Technical

Q1. Explain stress, strain curve diagram with example?
Ans. 
Stress-strain curve shows relationship between stress and strain in a material under tension.
• Stress-strain curve is a graphical representation of how a material deforms under stress.

• It typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.

• Example: Steel has a high yield strength, so its stress-strain curve shows a steep initial slope.

• Example: Rubber has a low yield stre...read more
Answered by AI
Add your answer
Q2. What is DOF? How many degrees of freedom from any object
Ans. 
DOF stands for Degrees of Freedom. It refers to the number of independent parameters that define the configuration of an object.
• DOF is the number of ways a rigid body can move in 3D space.

• For a rigid body in 3D space, there are 6 degrees of freedom - 3 translational and 3 rotational.

• Examples of DOF include linear motion along x, y, z axes and rotational motion around x, y, z axes.
Answered by AI
Add your answer

Q1. Sheet metal defects?
Add your answer
Q2. What is k factor in sheet metal?
Ans. 
K factor in sheet metal is a constant representing the ratio of the location of the neutral axis to the material thickness.
• K factor determines how much a sheet metal part will stretch during bending.

• It is used in calculating the bend allowance, bend deduction, and other bending-related calculations.

• K factor values vary depending on the material type, thickness, and bending method.

• For example, a K factor of 0.5 means th...read more
Answered by AI
Add your answer
Q3. Plastic molding machine?
Add your answer
Q4. Prevention plastic defects
Add your answer

Q1. What is the role of npd person in industry?
Ans. 
NPD person plays a crucial role in industry by leading the development of new products from concept to launch.
• Responsible for identifying market opportunities and consumer needs

• Leads cross-functional teams to develop new products

• Coordinates with various departments such as marketing, engineering, and manufacturing

• Manages the product development process from concept to commercialization

• Ensures products meet quality stan...read more
Answered by AI
View 1 more answer
Q2. How to solve manufacturing issue?
Ans. 
To solve a manufacturing issue, identify the root cause, brainstorm solutions, implement changes, and monitor results.
• Identify the root cause of the issue by analyzing data and conducting tests.

• Brainstorm potential solutions with a cross-functional team to gather diverse perspectives.

• Implement changes based on the chosen solution, considering cost, time, and resources.

• Monitor the results of the changes to ensure they e...read more
Answered by AI
Add your answer
Q3. What is current & voltage?
Ans. 
Current is the flow of electric charge in a circuit, measured in Amperes (A). Voltage is the electrical potential difference between two points in a circuit, measured in Volts (V).
• Current is the rate of flow of electric charge in a circuit

• Voltage is the electrical potential difference between two points in a circuit

• Current is measured in Amperes (A)

• Voltage is measured in Volts (V)

• Ohm's Law relates current, voltage, and
Answered by AI
Add your answer
Q4. Cad test on creo software version 7.0? 45 min cad test complete timing?
Add your answer
Q5. Written interview? 45 min. If any person are required this written interview test paper. Pls mail. My mail id is- *****
Add your answer

Cad test on catia software.

Q1. Plastic categories?
Add your answer
Q2. Prevention of plastic defects?
Ans. 
Preventing plastic defects involves proper material selection, design optimization, and quality control measures.
• Selecting the right type of plastic for the application

• Optimizing the design to minimize stress concentrations

• Implementing proper molding techniques and parameters

• Conducting thorough quality control inspections

• Addressing any issues promptly to prevent defects from recurring
Answered by AI
Add your answer
Q3. When you make a design in any plastic component. what you are design consideration?
Ans. 
Design considerations for plastic components include material selection, manufacturability, functionality, aesthetics, and cost.
• Material selection based on properties like strength, flexibility, and chemical resistance

• Consideration of manufacturability, such as moldability and ease of assembly

• Ensuring functionality requirements are met, such as mechanical strength or thermal resistance

• Aesthetics like color, texture, an...read more
Answered by AI
Add your answer

Q1. CAD test will be there and Interview questions related to interior/exterior with respect to Design rules , Homologation
Add your answer

Q1. Design rules related, master section related, Homologation related
Add your answer

Q1. Part drawing 2D or 3D
Ans. 
2D is a flat picture while 3D is one that has depth.
Answered Anonymously
Add your answer
Q2. Sketcher 2d drawings
Ans. 
First of all we sketch 2d drawings after we assembly the complete object
Answered Anonymously
Add your answer
Q3. Assembly all part drawing
Ans. 
When 2D sketch complete, after we calling parts to make complete assembly.
Answered Anonymously
Add your answer
Q4. Generative Sheet metal
Add your answer
Q5. Generative drafting
Add your answer

Aptitude test simple one..very easy

Q1. Catia and Plastic..Gd t and lights
Add your answer
Q2. Your professional history and learning
Add your answer