Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Spark Minda Team. If you also belong to the team, you can get access from here

Spark Minda Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Spark Minda Design Engineer Interview Questions and Answers

Updated 3 Apr 2024

Spark Minda Design Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. How to add connector in CAptila harness
  • Ans. 

    To add a connector in CAptila harness, you need to use the appropriate tool and follow specific steps.

    • Open the CAptila harness design software

    • Select the location where you want to add the connector

    • Choose the type of connector from the library

    • Place the connector in the desired location

    • Connect the wires to the connector pins

    • Verify the connection and run any necessary simulations

  • Answered by AI
  • Q2. Press O then you can directly add connector

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Which types of lacquer used on lens and Housing ?
  • Ans. 

    The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

    • Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

    • Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

    • Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

  • Answered by AI
  • Q2. What is size fine filter ?
  • Ans. 

    A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

    • Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

    • They are designed to capture particles that are smaller than what can be filtered by regular filters.

    • These filters can be made of various materials such as paper, fabric, or synthetic fibers.

    • Examples of size ...

  • Answered by AI
  • Q3. On which material direct metalizing is applicable ?
  • Ans. 

    Direct metalizing is applicable on materials that can conduct electricity.

    • Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

    • The material should be able to conduct electricity for direct metalizing to be applicable.

    • Materials like plastic, glass, and ceramics can be direct metalized.

    • Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

  • Answered by AI
  • Q4. PC Material
  • Q5. How much UV energy is required for curing?
  • Ans. 

    The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

    • UV energy required for curing varies depending on the material being cured

    • Intensity of the UV light also affects the amount of energy required

    • UV energy is typically measured in Joules per square centimeter (J/cm²)

    • Examples of materials that require UV curing include adhesives, coatings, and inks

  • Answered by AI
  • Q6. 2500 ~ 3500
  • Q7. How much DFT is required as per standard ?
  • Ans. 

    The amount of DFT required as per standard varies depending on the specific industry and project requirements.

    • The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

    • Different industries may have different standards for DFT.

    • The complexity and size of the project also influence the amount of DFT required.

    • DFT techniques include scan chains, built-in self-test (BI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It must be done as like process catroled

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

Interview Questionnaire 

4 Questions

  • Q1. When you apply for the Post of Sr Engineer, they expect a professional answer from your field. Since I was from a tooling background, they asked me few questions which were not very tricky so I answered th...
  • Q2. Generally, they would like to know whether you are ready to relocate. Compay prefers persons who are easy to relocate and travel. So be open-minded and accept the challenge.
  • Q3. They would like to know if you are adjustable in another state too.
  • Q4. They would like to know the salary expectation.

Interview Preparation Tips

Interview preparation tips for other job seekers - My advice to a new aspiring professional is to be open-minded and accept the challenge offered to you. Based on your performance the company will surely look after your choices and preference. you have to bid your salary a little high if they are likely to post you to some outstation.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company

Round 1 - Technical 

(1 Question)

  • Q1. About lithium ion battery

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Supplier quality assurance NPD Apqp ppap SPC MSA QAV VENDOR RATTING FMEA XBAR CHAR CUSTOMER RATTING INPROCESS

I applied via Approached by Company and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic HR question (tell me about yourself and similar)
Round 3 - Technical 

(1 Question)

  • Q1. Technical questions related to field
Round 4 - One-on-one 

(1 Question)

  • Q1. Interview cum interaction with top management

Interview Preparation Tips

Interview preparation tips for other job seekers - Stick to basics and should have good knowledge of respective field.

I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
  • Q2. How can improve communication and personality
  • Ans. 

    Improving communication and personality requires self-awareness, active listening, and continuous learning.

    • Practice active listening to understand others' perspectives

    • Be aware of your own communication style and adjust as needed

    • Seek feedback and be open to constructive criticism

    • Read books or take courses on communication and interpersonal skills

    • Practice empathy and emotional intelligence

    • Be respectful and courteous in a

  • Answered by AI
  • Q3. How can show your potential
  • Q4. How can show first impressions
  • Ans. 

    First impressions can be shown through body language, attire, and communication skills.

    • Body language can convey confidence or nervousness

    • Attire can show professionalism or lack thereof

    • Communication skills can demonstrate intelligence and articulation

    • Eye contact and a firm handshake can also make a positive impression

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About experiance and related about resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Friendly
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Personal details and experience details
  • Q2. Personal details and experience details

Spark Minda Interview FAQs

How many rounds are there in Spark Minda Design Engineer interview?
Spark Minda interview process usually has 1 rounds. The most common rounds in the Spark Minda interview process are Technical.
How to prepare for Spark Minda Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Spark Minda. The most common topics and skills that interviewers at Spark Minda expect are Design, Wiring Harness, AutoCAD, CATIA and DFMEA.
What are the top questions asked in Spark Minda Design Engineer interview?

Some of the top questions asked at the Spark Minda Design Engineer interview -

  1. How to add connector in CAptila harn...read more
  2. Press O then you can directly add connec...read more

Tell us how to improve this page.

Spark Minda Design Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Spark Minda Design Engineer Salary
based on 148 salaries
₹1.2 L/yr - ₹7.5 L/yr
10% less than the average Design Engineer Salary in India
View more details

Spark Minda Design Engineer Reviews and Ratings

based on 24 reviews

3.3/5

Rating in categories

4.0

Skill development

3.2

Work-life balance

2.9

Salary

3.2

Job security

3.0

Company culture

3.1

Promotions

3.4

Work satisfaction

Explore 24 Reviews and Ratings
Assistant Manager
400 salaries
unlock blur

₹4.5 L/yr - ₹14.4 L/yr

Senior Engineer
252 salaries
unlock blur

₹2.2 L/yr - ₹10.1 L/yr

Deputy Manager
235 salaries
unlock blur

₹6.8 L/yr - ₹23.5 L/yr

Quality Engineer
227 salaries
unlock blur

₹1.4 L/yr - ₹5.7 L/yr

Engineer
184 salaries
unlock blur

₹2.2 L/yr - ₹6 L/yr

Explore more salaries
Compare Spark Minda with

JBM Group

4.0
Compare

Subros

3.8
Compare

Endurance Technologies

3.9
Compare

Gabriel India

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview